GPS tracker VL103 | Integrated with Wialon

Features VL103:

2G
4G/LTE
Blackbox

The following data should also be added to VL103 unit properties section of Wialon GPS tracking software :

Device type:	VL103
Unique ID:	imei

Specify the following parameters in configuration software or configuration VL103 for use in Wialon Hosting :

Server port:

22361

11 units of VL103 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
pwr_ext	Voltage level	V
gsm	GSM Signal Strength
imei	imei number
imsi	imsi number
iccid	iccid number
time	Time stamp
sats	Number of satellites
visible_sats	Visible satellites
sat#_signal_strength	Satellites signal strength, where # - number
mcc	LBS Main Cell Tower, mcc
mnc	LBS Main Cell Tower, mnc
lac	LBS Main Cell Tower, lac
cell_id	LBS Main Cell Tower, cell_id
rssi	LBS Main Cell Tower, rssi
lac#	LBS Auxiliary Cell Tower, lac, where # - number
cell_id#	LBS Auxiliary Cell Tower, cell_idm, where # - number
rssi#	LBS Auxiliary Cell Tower, rssi, where # - number
gsm_signal_csq	GSM Signal CSQ
battery_vol	Battery Voltage
hdop	HDOP
sequence_num	Sequence Number
inputs	Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
boot_reason	Boot Reason
mileage	Mileage statistics
real_time_mode#	Real time current mode, where # - number
static_parameter_mode#	Static mode parameter, where # - number
is_geofence_rectangular#	Circular o rectangular, 0 is circular, 1 is rectangular, where # - id
is_geofence_exit#	Enter or Exit geofence, 1 is enter, 2 is exit, where # - id
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
status_trig_time1	Report status: Trigger time
status_reg_content	Report status: Trigger content
gps_time_status	GPS is Real Time or Reupload
alm1	Alarm Bit 1
alm2	Alarm Bit 2
alm3	Alarm Bit 3
sta1	Status Bit 1
dyd	Fuel/Electricity Cutoff Status
sos_num#	SOS number, where # - number
center_num	Centre number
fence	GeoFence
door	Door status
cit	Content of Terminal Information (heartbeat msg)
alarm	0x00: Normal 0x01: SOS alert 0x02: Power cut alert 0x03: Vibrating alert 0x04: Entered fence alert 0x05: Left fence alert 0x06: Speed alert 0x09: Tow/theft alert 0x0A: Entered GPS blind spot alert 0x0B: Left GPS blind spot alert 0x0C: Powered on alert 0x0D: GPS first fix alert 0x0E: Low external battery alert 0x0F: External battery low voltage protection alert 0x10: SIM changed alert 0x11: Powered off alert 0x12: Airplane mode on following external battery low voltage protection 0x13: Tamper alert 0x14: Door alert 0x15: Powered off due to low battery 0x16: Sound-control alert 0x17: Rogue base station detected alert 0x18: Cover removed alert 0x19: Low internal battery alert 0x20: Entered deep sleep mode alert 0x21: Reserved 0x22: Reserved 0x23: Fall alert 0x29: Harsh acceleration 0x2A: Sharp left cornering alert 0x2B: Sharp right cornering alert 0x2C: Collision alert 0x30: Harsh braking 0x32: Device unplugged alert 0x53:Oil Steal alarm 0x71:Refuel notice 0x77:ADC1 High voltage alarm 0x78:ADC1 Low voltage alarm 0xC5 Engine is already turned on 0xC6 Engine is already turned off 0xC7 Driver has been driving extendedly 0xC8 Extended driving of driver is already known 0XE6 INPUT1 is activated 0XE7 INPUT1 is deactivated 0XE8 INPUT2 is activated 0XE9 INPUT2 is deactivated 0xFF: ACC OFF 0xFE: ACC ON

Parameter name

Description

Units

pwr_ext

Voltage level

gsm

GSM Signal Strength

imei

imei number

imsi

imsi number

iccid

iccid number

time

Time stamp

sats

Number of satellites

visible_sats

Visible satellites

sat#_signal_strength

Satellites signal strength, where # - number

mcc

LBS Main Cell Tower, mcc

mnc

LBS Main Cell Tower, mnc

lac

LBS Main Cell Tower, lac

cell_id

LBS Main Cell Tower, cell_id

rssi

LBS Main Cell Tower, rssi

lac#

LBS Auxiliary Cell Tower, lac, where # - number

cell_id#

LBS Auxiliary Cell Tower, cell_idm, where # - number

rssi#

LBS Auxiliary Cell Tower, rssi, where # - number

gsm_signal_csq

GSM Signal CSQ

battery_vol

Battery Voltage

hdop

HDOP

sequence_num

Sequence Number

inputs

Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

boot_reason

Boot Reason

mileage

Mileage statistics

real_time_mode#

Real time current mode, where # - number

static_parameter_mode#

Static mode parameter, where # - number

is_geofence_rectangular#

Circular o rectangular, 0 is circular, 1 is rectangular, where # - id

is_geofence_exit#

Enter or Exit geofence, 1 is enter, 2 is exit, where # - id

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

status_trig_time1

Report status: Trigger time

status_reg_content

Report status: Trigger content

gps_time_status

GPS is Real Time or Reupload

alm1

Alarm Bit 1

alm2

Alarm Bit 2

alm3

Alarm Bit 3

sta1

Status Bit 1

dyd

Fuel/Electricity Cutoff Status

sos_num#

SOS number, where # - number

center_num

Centre number

fence

GeoFence

door

Door status

cit

Content of Terminal Information (heartbeat msg)

alarm

0x00: Normal

0x01: SOS alert

0x02: Power cut alert

0x03: Vibrating alert

0x04: Entered fence alert

0x05: Left fence alert

0x06: Speed alert

0x09: Tow/theft alert

0x0A: Entered GPS blind spot alert

0x0B: Left GPS blind spot alert

0x0C: Powered on alert

0x0D: GPS first fix alert

0x0E: Low external battery alert

0x0F: External battery low voltage protection alert

0x10: SIM changed alert

0x11: Powered off alert

0x12: Airplane mode on following external battery low voltage protection

0x13: Tamper alert

0x14: Door alert

0x15: Powered off due to low battery

0x16: Sound-control alert

0x17: Rogue base station detected alert

0x18: Cover removed alert

0x19: Low internal battery alert

0x20: Entered deep sleep mode alert

0x21: Reserved

0x22: Reserved

0x23: Fall alert

0x29: Harsh acceleration

0x2A: Sharp left cornering alert

0x2B: Sharp right cornering alert

0x2C: Collision alert

0x30: Harsh braking

0x32: Device unplugged alert

0x53:Oil Steal alarm

0x71:Refuel notice

0x77:ADC1 High voltage alarm

0x78:ADC1 Low voltage alarm

0xC5 Engine is already turned on

0xC6 Engine is already turned off

0xC7 Driver has been driving extendedly

0xC8 Extended driving of driver is already known

0XE6 INPUT1 is activated

0XE7 INPUT1 is deactivated

0XE8 INPUT2 is activated

0XE9 INPUT2 is deactivated

0xFF: ACC OFF

0xFE: ACC ON

Fill out a request form to get started with Wialon

Gurtam products

Niche products for addressing specific tasks

VL103

More devices from the manufacturer

News

Contact Gurtam and achieve the most ambitious goals with telematics

Become a partner

Request Wialon in your region

Fill out a request form to get started with Wialon