Concox JM-VL02

Concox JM-VL02
Manufacturer: Jimi IoT (Concox)
Forum Discussion

Number of units

154
Online
282
Total
Features Concox JM-VL02:
  • 4G/LTE
  • Blackbox
Supported in Wialon:
  • ADC sensors
  • Remote management via GPRS
  • Digital sensors
  • LBS
  • Alarm button
  • Modification of the "speed" parameter
  • Communication via TCP

The following data should also be added to Concox JM-VL02 unit properties section of Wialon GPS tracking software :

Device type: Concox JM-VL02
Unique ID: imei

Specify the following parameters in configuration software or configuration Concox JM-VL02 for use in Wialon Hosting :

Server port: 21987

282 units of Concox JM-VL02 device type are connected to Wialon Data Center. This represents 0.01% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
pwr_ext Voltage level V
gsm GSM Signal Strength
imei imei number
imsi imsi number
iccid iccid number
time Time stamp
sats Number of satellites
visible_sats Visible satellites
sat#_signal_strength Satellites signal strength, where # - number
mcc LBS Main Cell Tower, mcc
mnc LBS Main Cell Tower, mnc
lac LBS Main Cell Tower, lac
cell_id LBS Main Cell Tower, cell_id
rssi LBS Main Cell Tower, rssi
lac# LBS Auxiliary Cell Tower, lac, where # - number
cell_id# LBS Auxiliary Cell Tower, cell_idm, where # - number
rssi# LBS Auxiliary Cell Tower, rssi, where # - number
gsm_signal_csq GSM Signal CSQ
battery_vol Battery Voltage
hdop HDOP
sequence_num Sequence Number
inputs Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
boot_reason

Boot Reason


mileage Mileage statistics
real_time_mode# Real time current mode, where # - number
static_parameter_mode# Static mode parameter, where # - number
is_geofence_rectangular# Circular o rectangular, 0 is circular, 1 is rectangular, where # - id
is_geofence_exit# Enter or Exit geofence, 1 is enter, 2 is exit, where # - id
status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

status_trig_time1 Report status: Trigger time
status_reg_content Report status: Trigger content
gps_time_status GPS is Real Time or Reupload
alm1 Alarm Bit 1
alm2 Alarm Bit 2
alm3 Alarm Bit 3
sta1 Status Bit 1
dyd Fuel/Electricity Cutoff Status
sos_num# SOS number, where # - number
center_num Centre number
fence GeoFence
door Door status
cit Content of Terminal Information (heartbeat msg)
alarm

0x00: Normal

0x01: SOS alert

0x02: Power cut alert

0x03: Vibrating alert

0x04: Entered fence alert

0x05: Left fence alert

0x06: Speed alert

0x09: Tow/theft alert

0x0A: Entered GPS blind spot alert

0x0B: Left GPS blind spot alert

0x0C: Powered on alert

0x0D: GPS first fix alert

0x0E: Low external battery alert

0x0F: External battery low voltage protection alert

0x10: SIM changed alert

0x11: Powered off alert

0x12: Airplane mode on following external battery low voltage protection

0x13: Tamper alert

0x14: Door alert

0x15: Powered off due to low battery

0x16: Sound-control alert

0x17: Rogue base station detected alert

0x18: Cover removed alert

0x19: Low internal battery alert

0x20: Entered deep sleep mode alert

0x23: Fall alert

0x29: Harsh acceleration

0x2A: Sharp left cornering alert

0x2B: Sharp right cornering alert

0x2C: Collision alert

0x30: Harsh braking

0x32: Device unplugged alert

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone