JM-LG01

Features JM-LG01:

Blackbox
Magnetic mounting

The following data should also be added to JM-LG01 unit properties section of Wialon GPS tracking software:

Device type:	JM-LG01
Unique ID:	imei

Specify the following parameters in configuration software or configuration JM-LG01 for use in Wialon Hosting:

Server port:

21905

1788 units of JM-LG01 device type are connected to Wialon Data Center. This represents 4.22% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
voltage	Voltage level
gsm	GSM Signal Strength: 0x00: no signal; 0x01: extremely weak signal; 0x02: weak signal; 0x03: good signal; 0x04: strong signal.
serial	Serial number of data sent
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
acc	ACC Status. ACC low: 00, ACC high: 01
data_mode	GPS data upload mode 0x00 Upload by time interval 0x01 Upload by distance interval 0x02 Inflection point upload 0x03 ACC status upload 0x04 Re-upload the last GPS point when back to static. 0x05 Upload the last effective point when network recovers.
gps_real_up	0x00 Real time upload 0x01 Re-upload
rssi	Signal level of community,range 0x00～0xFF, 0x00 Weakest signal 0xFF Strongest signal
tmng_adv	Value= “Actual time of signal from Mobile Station to Location base”-“Time of signal from Mobile Station to Location base supposed the distance is 0”
voltage_lvl	Voltage Level: 0 - No Power (shutdown) 1 - Extremely Low Battery (not enough for calling or sending text messages, etc.) 2 - Very Low Battery (Low Battery Alarm) 3 - Low Battery (can be used normally) 4 - Medium 5 - High 6 - Very High
alarm_state	Alarm information 0 - normal 1 - SOS 2 - Power cut alarm 3 - Vibration alarm 4 - Enter fence alarm 5 - Exitfence alarm 6 - Over speed alarm 9 - Vibration alarm 10 - Enter GPS dead zone alarm 11 - Exit GPS dead zone alarm 12 - Power on alarm 13 - GPS First fix notice 14 - Low battery alarm 15 - Low battery protection alarm 16 - SIM change notice 17 - Power off alarm 18 - Airplane mode alarm 19 - Disassemble alarm
language	Language: 1 - Chinese 2 - English

Parameter name

Description

Units

voltage

Voltage level

gsm

GSM Signal Strength:

0x00: no signal;
0x01: extremely weak signal;
0x02: weak signal;
0x03: good signal;
0x04: strong signal.

serial

Serial number of data sent

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Cell Tower ID

acc

ACC Status. ACC low: 00, ACC high: 01

data_mode

GPS data upload mode

0x00 Upload by time interval
0x01 Upload by distance interval
0x02 Inflection point upload
0x03 ACC status upload
0x04 Re-upload the last GPS point when back to static.
0x05 Upload the last effective point when network recovers.

gps_real_up

0x00 Real time upload 0x01 Re-upload

rssi

Signal level of community,range 0x00～0xFF,

0x00 Weakest signal
0xFF Strongest signal

tmng_adv

Value= “Actual time of signal from Mobile Station to Location base”-“Time of signal from Mobile Station to Location base supposed the distance is 0”

voltage_lvl

Voltage Level:

0 - No Power (shutdown)
1 - Extremely Low Battery (not enough for calling or sending text messages, etc.)
2 - Very Low Battery (Low Battery Alarm)
3 - Low Battery (can be used normally)
4 - Medium
5 - High
6 - Very High

alarm_state

Alarm information

0 - normal
1 - SOS
2 - Power cut alarm
3 - Vibration alarm
4 - Enter fence alarm
5 - Exitfence alarm
6 - Over speed alarm
9 - Vibration alarm
10 - Enter GPS dead zone alarm
11 - Exit GPS dead zone alarm
12 - Power on alarm
13 - GPS First fix notice
14 - Low battery alarm
15 - Low battery protection alarm
16 - SIM change notice
17 - Power off alarm
18 - Airplane mode alarm
19 - Disassemble alarm

language

Language:
1 - Chinese
2 - English

Fill out a request form to get started with Wialon

Gurtam products

Niche products for addressing specific tasks

JM-LG01

More devices from the manufacturer

News

Fill out a request form to get started with Wialon