Concox AT4

Supported in Wialon:

Remote management via GPRS
LBS
Remote management via SMS
Communication via TCP

The following data should also be added to Concox AT4 unit properties section of Wialon GPS tracking software:

Device type:	Concox AT4
Unique ID:	imei

Specify the following parameters in configuration software or configuration Concox AT4 for use in Wialon Hosting:

Server port:

21472

1895 units of Concox AT4 device type are connected to Wialon Data Center. This represents 9.47% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
voltage	Voltage level
gsm	GSM Signal Strength: 0x00: no signal; 0x01: extremely weak signal; 0x02: weak signal; 0x03: good signal; 0x04: strong signal.
serial	Serial number of data sent
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
acc	ACC Status. ACC low: 00, ACC high: 01
data_mode	GPS data upload mode 0x00 Upload by time interval 0x01 Upload by distance interval 0x02 Inflection point upload 0x03 ACC status upload 0x04 Re-upload the last GPS point when back to static. 0x05 Upload the last effective point when network recovers.
gps_real_up	0x00 Real time upload 0x01 Re-upload
rssi	Signal level of community,range 0x00～0xFF, 0x00 Weakest signal 0xFF Strongest signal
tmng_adv	Value= “Actual time of signal from Mobile Station to Location base”-“Time of signal from Mobile Station to Location base supposed the distance is 0”
voltage_lvl	Voltage Level: 0x00：No Power (shutdown) 0x01：Extremely Low Battery (not enough for calling or sending text messages, etc.) 0x02：Very Low Battery (Low Battery Alarm) 0x03：Low Battery (can be used normally) 0x04：Medium 0x05：High 0x06：Very High
alarm_state	Alarm information: 0：normal 1：SOS 2：Power cut alarm 3: Vibration alarm 4:Enter fence alarm 5:Exit fence alarm 6 Over speed alarm 9 Displacement alarm 10:Enter GPS dead zone alarm 11:Exit GPS dead zone alarm 12: Power on alarm 13: GPS First fix notice 14: Low battery alarm 15: Low battery protection alarm 16 SIM change notice 17 Power off alarm 18 Airplane mode alarm 19 Displacing alarm 20 Door alarm 21 Low battery and shutdown alarm 22 Sound control alarm 23 Pseudo base-station alarm 24 Disassemble alarm

Parameter name

Description

Units

voltage

Voltage level

gsm

GSM Signal Strength:

0x00: no signal;
0x01: extremely weak signal;
0x02: weak signal;
0x03: good signal;
0x04: strong signal.

serial

Serial number of data sent

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Cell Tower ID

acc

ACC Status. ACC low: 00, ACC high: 01

data_mode

GPS data upload mode

0x00 Upload by time interval
0x01 Upload by distance interval
0x02 Inflection point upload
0x03 ACC status upload
0x04 Re-upload the last GPS point when back to static.
0x05 Upload the last effective point when network recovers.

gps_real_up

0x00 Real time upload 0x01 Re-upload

rssi

Signal level of community,range 0x00～0xFF,

0x00 Weakest signal
0xFF Strongest signal

tmng_adv

Value= “Actual time of signal from Mobile Station to Location base”-“Time of signal from Mobile Station to Location base supposed the distance is 0”

voltage_lvl

Voltage Level:

0x00：No Power (shutdown)
0x01：Extremely Low Battery (not enough for calling or sending text messages, etc.)
0x02：Very Low Battery (Low Battery Alarm)
0x03：Low Battery (can be used normally)
0x04：Medium
0x05：High
0x06：Very High

alarm_state

Alarm information:
0：normal
1：SOS
2：Power cut alarm
3: Vibration alarm
4:Enter fence alarm
5:Exit fence alarm
6 Over speed alarm
9 Displacement alarm
10:Enter GPS dead zone alarm
11:Exit GPS dead zone alarm
12: Power on alarm
13: GPS First fix notice
14: Low battery alarm
15: Low battery protection alarm
16 SIM change notice
17 Power off alarm
18 Airplane mode alarm
19 Displacing alarm
20 Door alarm
21 Low battery and shutdown alarm
22 Sound control alarm
23 Pseudo base-station alarm
24 Disassemble alarm

Concox AT4

More devices from the manufacturer

News