Concox X1

Concox X1
Manufacturer: Jimi IoT (Concox)
Forum Discussion
Discontinued

Number of units

30
Online
69
Total
Features Concox X1:
  • Blackbox
Supported in Wialon:
  • ADC sensors
  • Camera connection
  • Remote management via GPRS
  • Driver identification
  • Digital sensors
  • Alarm button
  • Communication via TCP

The following data should also be added to Concox X1 unit properties section of Wialon GPS tracking software :

Device type: Concox X1
Unique ID: imei

Specify the following parameters in configuration software or configuration Concox X1 for use in Wialon Hosting :

Server port: 21408

69 units of Concox X1 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
alarm_type

Type of alarm:

0 - Normal position package
1 - SOS alarm
2 - Ext-power cut alarm
3 - Vibration alarm
4 - Enter geo-fence
5 - Exit geo-fence
6 - Speeding
14 - Internal battery low voltage
48 - ACC ON
49 - ACC OFF
50 - IN3 active
51 - IN3 release
52 - IN4 active
53 - IN4 release
54 - Fatigue driving
55 - Fatigue relieve
56 - Idling
57 - Login
58 - Log out
59 - High temperature alarm
60 - Low temperature alarm
61 - COM port communication ERROR
62 - Harsh Accelerate
63 - Harsh Braking
64 - Enter Sleep
65 - Wake Up
66 - GPS Jamming
67 - GSM Jamming
68 - GPS Antenna Cut

temp_sens Temperature sensor number
status

Bitwise parameter:
Bit 4 - Idling Running;
Bit 5 - Fatigue Driving;
Bit 6 - Ext-power power low voltage;
Bit 7 - Ext-power lost;
Bit 8 - GPS antenna cut flag;

mileage Odometer m
mcc Mobile Country Code
mnc Mobile Network Code
lac Location Area Code
cell_id Cell Tower ID
rfid

RFID/iButton tag ID;
If RFID-data = 0 - empty RFID/iButton data

pwr_ext

Voltage of ext-power supply

V
pwr_int Voltage of internal battery V
sensN_M Sensor with type N and number M. External sensor data which connected to terminal.
inN

Value of digital input with number N:
1- SOS status
2 - ACC status
3 - IN3 status
4 - IN4 status
5 - IN5 status
6 - IN6 status
7 - IN7 status

8 - IN8 status

adcN The voltage of analog data input witn number N. 0.01V
outN

Status of digital output with number N:
1 - OUTPUT1 status
2 - OUTPUT2 status
3 - OUTPUT3 status
4 - OUTPUT4 status
5 - OUTPUT5 status
6 - OUTPUT6 status
7 - OUTPUT7 status
8 - OUTPUT8 status

pho_src

Event source of taking photograph:
0 - Photographing by command
1 - SOS Alarm
2 - Photographing when ext-power cut off
3 - Photographing when Vibration alarm
4 - Photographing when enter geo-fence
5 - Photographing when exit geo-fence
6 - Photographing when speeding
14 - Photographing when internal battery low voltage
48 - Photographing when ACC ON
49 - Photographing when ACC OFF
50 - Photographing when IN3 active
51 - Photographing when IN3 release
52 - Photographing when IN4 active
53 - Photographing when IN4 release
54 - Photographing when fatigue driving
55 - Photographing when fatigue relieve
56 - Photographing when idling
57 - Photographing when login
58 - Photographing when logout
59 - Photographing when high temperature alarm
60 - Photographing when low temperature alarm
61 - Photographing when COM port communication error
62 - Photographing when Harsh Accelerate
63 - Photographing when Harsh Braking
64 - Photographing when Enter Sleep
65 - Photographing when Wake Up
66 - Photographing when GPS Jamming
67 - Photographing when GSM Jamming
68 - Photographing when GPS Antenna Cut
255 - Timing photographing

state

Bitwise parameter:
Bit 1 - 1: Defense active; 0: Defense deactive;
Bit 2 - 1: ACC ON; 0: ACC OFF;
Bit 3 - 1: Charging on; 0: Charging off;
Bit 7 - 1: GPS tracking is on; 0: GPS tracking is off;
Bit 8 - 1: Oil and electricity disconnected; 0: Oil and electricity connected;

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone