Concox GT06F

Concox GT06F
Manufacturer: Shenzhen Concox
Forum Discussion

Number of units

783
Online
939
Total
Supported in Wialon:
  • Digital sensors
  • LBS
  • Remote management via SMS
  • Alarm button
  • Communication via TCP

The following data should also be added to Concox GT06F unit properties section of Wialon GPS tracking software:

Device type: Concox GT06F
Unique ID: imei

Specify the following parameters in configuration software or configuration Concox GT06F for use in Wialon Hosting:

Server port: 21144

939 units of Concox GT06F device type are connected to Wialon Data Center. This represents 0.1% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
alarm Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm
alarm_status Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS
mcc Mobile Country Code
mnc Mobile Network Code
lac Location Area Code
cell_id Cell Tower ID
voltage Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition
gsm GSM signal strength degree
pwr_ext External power voltage V
alm1 Bitwise parameter (1 - ON, 1 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Displacement Alarm
bit5 - SMS Alarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Vibration Alarm
alm2 Bitwise parameter (1- ON, 0 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Low Battery Alarm
bit5 - SMS Alarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Low Battery Alarm
alm3 Bitwise parameter (1 - ON, 0 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Power Off Alarm
bit5 - SMSAlarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Overspeed Alarm
sta1 Bitwise parameter (1 - ON, 0 - OFF):
bit1 - Disassembly Alarm Status
bit2 - Disassembly
bit5 - Remotely Disarm
bit6 - Manually Arm
bit7 - Automatically Arm
bit8 - Arm Status
sos_numN SOS Number
center_num Centre Number
fence Fence
dyd Fuel/Electricity, Cutoff Status ( 1 - Valid, 0 - Invalid):
bit1 - Oil/Electricity connection
bit2 - Oil/Electricity cutoff
bit3 - Deferred execution caused by GPS unlocated
bit4 - Deferred execution caused by overspeed
door Bitwise parameter:
bit 0 - Door Status: 1 - ON, 0 - OFF
bit 1 - Triggering Status: 1 - High triggering, 0 - Low triggering
bit 2 - IO Status: 1 - High, 0 - Low
mode Mode
mileage Mileage

More devices from the manufacturer

News