VL103

VL103
Discusión en el foro

Cantidad de unidades

0
En línea
0
Total
Características VL103:
  • 2G
  • 4G/LTE
  • Caja negra

Para que el sistema de rastreo Wialon identifique los datos de VL103 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: VL103
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración VL103 para utilizarlos en Wialon Hosting :

Puerto del servidor: 22361

En el centro de servicio Wialon se utilizan 0 unidades VL103 — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
pwr_ext Voltage level V
gsm GSM Signal Strength
imei imei number
imsi imsi number
iccid iccid number
time Time stamp
sats Number of satellites
visible_sats Visible satellites
sat#_signal_strength Satellites signal strength, where # - number
mcc LBS Main Cell Tower, mcc
mnc LBS Main Cell Tower, mnc
lac LBS Main Cell Tower, lac
cell_id LBS Main Cell Tower, cell_id
rssi LBS Main Cell Tower, rssi
lac# LBS Auxiliary Cell Tower, lac, where # - number
cell_id# LBS Auxiliary Cell Tower, cell_idm, where # - number
rssi# LBS Auxiliary Cell Tower, rssi, where # - number
gsm_signal_csq GSM Signal CSQ
battery_vol Battery Voltage
hdop HDOP
sequence_num Sequence Number
inputs Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
boot_reason Boot Reason


mileage Mileage statistics
real_time_mode# Real time current mode, where # - number
static_parameter_mode# Static mode parameter, where # - number
is_geofence_rectangular# Circular o rectangular, 0 is circular, 1 is rectangular, where # - id
is_geofence_exit# Enter or Exit geofence, 1 is enter, 2 is exit, where # - id
status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

status_trig_time1 Report status: Trigger time
status_reg_content Report status: Trigger content
gps_time_status GPS is Real Time or Reupload
alm1 Alarm Bit 1
alm2 Alarm Bit 2
alm3 Alarm Bit 3
sta1 Status Bit 1
dyd Fuel/Electricity Cutoff Status
sos_num# SOS number, where # - number
center_num Centre number
fence GeoFence
door Door status
cit Content of Terminal Information (heartbeat msg)
alarm

0x00: Normal

0x01: SOS alert

0x02: Power cut alert

0x03: Vibrating alert

0x04: Entered fence alert

0x05: Left fence alert

0x06: Speed alert

0x09: Tow/theft alert

0x0A: Entered GPS blind spot alert

0x0B: Left GPS blind spot alert

0x0C: Powered on alert

0x0D: GPS first fix alert

0x0E: Low external battery alert

0x0F: External battery low voltage protection alert

0x10: SIM changed alert

0x11: Powered off alert

0x12: Airplane mode on following external battery low voltage protection

0x13: Tamper alert

0x14: Door alert

0x15: Powered off due to low battery

0x16: Sound-control alert

0x17: Rogue base station detected alert

0x18: Cover removed alert

0x19: Low internal battery alert

0x20: Entered deep sleep mode alert

0x21: Reserved

0x22: Reserved

0x23: Fall alert

0x29: Harsh acceleration

0x2A: Sharp left cornering alert

0x2B: Sharp right cornering alert

0x2C: Collision alert

0x30: Harsh braking

0x32: Device unplugged alert

0x53:Oil Steal alarm

0x71:Refuel notice

0x77:ADC1 High voltage alarm

0x78:ADC1 Low voltage alarm

0xC5 Engine is already turned on

0xC6 Engine is already turned off

0xC7 Driver has been driving extendedly

0xC8 Extended driving of driver is already known

0XE6 INPUT1 is activated

0XE7 INPUT1 is deactivated

0XE8 INPUT2 is activated

0XE9 INPUT2 is deactivated

0xFF: ACC OFF

0xFE: ACC ON

Otros dispositivos del fabricante

Contacte con Gurtam y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono