Sascar

Sascar
Manufacturer: Sascar
Forum Discussion

Number of units

20
Online
46
Total

The following data should also be added to Sascar unit properties section of Wialon GPS tracking software:

Device type: Sascar
Unique ID: custom

46 units of Sascar device type are connected to Wialon Data Center. This represents 0.05% of all Protocols and retranslators connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
ign Ignition status:
1 - On
2 - Off
hourmeter Current vehicle hourmeter min
odometer Current vehicle odometer km
pwr_int Battery voltage value V
outputN Status of the device installed at output N. Returns 0 (zero) if there is no device installed or the device code installed with a positive value (active device) or negative (device inactive).
inputN Status of the device installed on input N. Returns 0 (zero) if there is no device installed or the code of the device installed with a positive (active device) or negative (inactive device) value.
memory Informs the type of package:
0 - Online
1 - Memory
reference_id Reference point identification
block Informs if the vehicle is blocked or not:
0 - Unlocked
1 - Locked
gps_valid Signal status:
0 - invalid GPS
1 - valid GPS
uf Federation unity
city City
street Address
landmark_name Name of the nearest landmark
angle_ref Angle with respect to reference point
dist_ref Distance in meters from the nearest reference point
rpm RPM data (Available for vehicles with multi-sensor)
temperatureN Temperature sensor data N
entry_point Informs if the vehicle entered a point on the vehicle:
0 - There was no change
1 - Entered the point
exit_point Informs if the vehicle left at a point on the vehicle:
0 - There was no change
1 - Point exit
macro_code Macro code
message_content Message content, separated by underline
message_text

Message text

keyboard_type Identification of the keyboard type, with possible values:
0 - Contains no message in the package
1 - TD50
3 - TD40
5 - TMCD
7 - TMS3
8 - SASMDT
jamming Reports the occurrence of a jamming event by the equipment, where:
0 - There was no jamming
1 - Jamming occurred
event_code Code of the actuator that generated the event, whose value can be positive indicating that it was activated or negative indicating that it was deactivated.
is_sat

Informs the origin of the package:

0 - GPRS

1 - SATELITAL

driver_id

Driver ID

Contact Gurtam and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone