Sascar

Sascar
Fabricante: Sascar
Discusión en el foro

Cantidad de unidades

15
En línea
46
Total

Para que el sistema de rastreo Wialon identifique los datos de Sascar en el diálogo de configuración de la unidad, indique los siguientes datos:

Tipo de dispositivo: Sascar
ID único: custom

En el centro de servicio Wialon se utilizan 46 unidades Sascar — es 0.05% de la cantidad total de dispositivos Protocolo de repetidor conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
ign Ignition status:
1 - On
2 - Off
hourmeter Current vehicle hourmeter min
odometer Current vehicle odometer km
pwr_int Battery voltage value V
outputN Status of the device installed at output N. Returns 0 (zero) if there is no device installed or the device code installed with a positive value (active device) or negative (device inactive).
inputN Status of the device installed on input N. Returns 0 (zero) if there is no device installed or the code of the device installed with a positive (active device) or negative (inactive device) value.
memory Informs the type of package:
0 - Online
1 - Memory
reference_id Reference point identification
block Informs if the vehicle is blocked or not:
0 - Unlocked
1 - Locked
gps_valid Signal status:
0 - invalid GPS
1 - valid GPS
uf Federation unity
city City
street Address
landmark_name Name of the nearest landmark
angle_ref Angle with respect to reference point
dist_ref Distance in meters from the nearest reference point
rpm RPM data (Available for vehicles with multi-sensor)
temperatureN Temperature sensor data N
entry_point Informs if the vehicle entered a point on the vehicle:
0 - There was no change
1 - Entered the point
exit_point Informs if the vehicle left at a point on the vehicle:
0 - There was no change
1 - Point exit
macro_code Macro code
message_content Message content, separated by underline
message_text

Message text

keyboard_type Identification of the keyboard type, with possible values:
0 - Contains no message in the package
1 - TD50
3 - TD40
5 - TMCD
7 - TMS3
8 - SASMDT
jamming Reports the occurrence of a jamming event by the equipment, where:
0 - There was no jamming
1 - Jamming occurred
event_code Code of the actuator that generated the event, whose value can be positive indicating that it was activated or negative indicating that it was deactivated.
is_sat

Informs the origin of the package:

0 - GPRS

1 - SATELITAL

driver_id

Driver ID

Contacte con Gurtam y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono