Suntech ST380

Suntech ST380
Manufacturer: Suntech
Forum Discussion
Discontinued

Number of units

12
Online
17
Total

The following data should also be added to Suntech ST380 unit properties section of Wialon GPS tracking software :

Device type: Suntech ST380
Unique ID: custom

Specify the following parameters in configuration software or configuration Suntech ST380 for use in Wialon Hosting :

Server port: 21598

17 units of Suntech ST380 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
mcc

Information of Mobile Country Code

mnc

Information of Mobile Network Code

lac

Information of Location Area Code

cell_id

Information of Cell ID

rx_level

Information of Rx Level

ta

Information of Timing Advance

model

Device Model

I/O

Current I/O status of the inputs and the outputs:

Ignition + Input1 + Input 2 + Input 3 + Out1 + Out2

Ignition : ‘1’ (ON), ‘0’ (OFF)

Input1 ~ Input3 : ‘1’ (Ground, Shorted), ‘0’ (Opened)

Out1 ~ Out2 : ‘1’ (Active), ‘0’ (Inactive)

msg_type

Report is real time (1), Report is storage (0)

cell

Location Code ID(3 digits hex) + Serving Cell BSIC(2 digits decimal)

pwr_ext

Voltage value of the main power

bck_volt

Voltage value of backup battery

h_meter

Driving hour-meter

dist

Traveled distance in meter

m
col_net_rf_ch

This field brings the information about whether collaborative Network is

enabled or not, and which RF channel is set.

First digit means collaborative network is Disabled or not

0 means collaborative network is Disabled

1 means collaborative network is Enabled

The other two digits means RF CHANNEL set

Example 1:

003: collaborative network is Disabled and RF CHANNEL set is 03

Example 2:

103: collaborative network is Enabled and RF CHANNEL set is 03

mode

‘1’ = Idle mode(Parking)

‘2’ = Active Mode(Driving)

‘6’ = ERB Mode

msg_num

Message number

sw_ver

Number of the released Software Version

fix GPS is fixed (1); GPS is not fixed (0)
fr_serial

Serial number of RF device which is in Emergency mode

rf_msg_type

Type of Message

1:Emergency Message without GPS coordinates

2:Emergency Message with GPS coordinates

3:Emergency Message without GPS coordinates stored during

JAM_DELAY (QUIET_MODE)

4:Emergency Message with GPS coordinates stored during JAM_DELAY

(QUIET_MODE)

rf_volt

Battery Voltage of RF Device which is in emergency mode

rf_rssi

RSSI in dBm received from RF Device which is in emergency mode.

-255 means RSSI is not available.

dBm

More devices from the manufacturer

Contact Gurtam and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone