Suntech ST710 (SigFox)

Suntech ST710 (SigFox)
Manufacturer: Suntech
Forum Discussion

Number of units

3
Online
41
Total
Features Suntech ST710 (SigFox):
  • Blackbox
  • Sigfox
  • Wi-Fi positioning
Supported in Wialon:
  • Digital sensors
  • Communication via TCP

The following data should also be added to Suntech ST710 (SigFox) unit properties section of Wialon GPS tracking software:

Device type: Suntech ST710 (SigFox)
Unique ID: custom

Specify the following parameters in configuration software or configuration Suntech ST710 (SigFox) for use in Wialon Hosting:

Server port: 21698

41 units of Suntech ST710 (SigFox) device type are connected to Wialon Data Center. This represents 0.08% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
msg_type Message type:
  • 17 - Event - turn on
  • 18 - Event - turn off
  • 19 - Event - SOS button
  • 20 - Event - Hall sensor triggered
  • 21 - Event - Hall sensor absent
  • 22 - Event - Movement
  • 23 - Event - Starting battery charge
  • 24 - Event - Stopped battery charge
  • 25 - Event - Entering geofence
  • 26 - Event - Leaving geofence
  • 27 - Event - Entering Wi-Fi fence
  • 28 - Event - Leaving Wi-Fi fence
  • 29 - Event - GPS jammer
  • 30 - Event - Low battery
  • 32 - Tracking
  • 80 - Event - Driving mode off
  • 81 - Event - Driving mode on
  • 82 - Event - Temperature below Low limit
  • 83 - Event - Temperature at normal level
  • 84 - Event - Temperature above High limit
  • 85 - Event - Entering Polygonal Fence
  • 86 - Event - Leaving Polygonal Fence
  • 87 - Event - SOS button release
  • 88 - Event - Input 1 on
  • 89 - Event - Input 1 off
  • 90 - Event - Input 2 on
  • 91 - Event - Input 2 off
  • 92 - Event - Output 1 on
  • 93 - Event - Output 1 off
  • 94 - Event - Output 2 on
  • 95 - Event - Output 2 off
  • 96 - Event - Movement on
  • 97 - Event - Movement off
  • 98 - Event - Main voltage source connected
  • 99 - Event - Main voltage source disconnected
  • 100 - Event - Speed Limit exceeded
  • 101 - Event - Ignition input on
  • 102 - Event - Ignition input off
  • 103 - Event - 1-Wire temperature event
  • 104 - Event - Start working hours
  • 105 - Event - Stop working hours
temp Temperature
voltage Battery voltage V
battery Battery level %
wifi_mac Wi-F Mac address
rssi Received signal strenght indication
nic Network Interface Card
ax Accelerometer. X axis
ay Accelerometer. Y axis
az Accelerometer. Z axis
fence_num Fence number
hourmeter Number of minutes in driving state min
odometer Distance travelled km
partial_hmeter Driving state in the last ignition cycle min
partial_odo Distance travelled in the last ignition cycle km
in1_cntr Number of transitions of input 1
in2_cntr Number of transition of input 2
1wire_X Temperature of 1-Wire sensor X °C

Suntech ST710 (SigFox) transmits data to SigFox platform. After that data are transmitted to Wialon. Please read the following document to make appropriate settings in SigFox platform:Instruction on configuring BATCH_URL and URL callbacks in SigFox platform

Please note that server port should be as on information tab.

More devices from the manufacturer

Contact Gurtam and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone