Skywave IDP-680/IDP-690

Skywave IDP-680/IDP-690
User rating

(3 Votes)

Forum Discussion

Number of units

0
Online
18
Total
Features Skywave IDP-680/IDP-690:
  • Satellite terminal
Supported in Wialon:
  • ADC sensors
  • Digital sensors

The following data should also be added to Skywave IDP-680/IDP-690 unit properties section of Wialon GPS tracking software:

Device type: Skywave IDP-680/IDP-690
Unique ID: serial

Specify the following parameters in configuration software or configuration Skywave IDP-680/IDP-690 for use in Wialon Hosting:

Server IP Address: 193.193.165.165
Server port: 20196

18 units of Skywave IDP-680/IDP-690 device type are connected to Wialon Data Center. This represents 3.59% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

The Skywave IDP-680/IDP-690 terminals use the two-way Inmarsat IsatDataPro satellite service for remotely managing assets anywhere in the world.

Main features of Skywave IDP-680/IDP-690:

    Satellite communication:
  • Two-way IsatDataPro satellite service
  • Global coverage
  • Up to 6.4 kB from-mobile message size
  • Up to 10 kB to-mobile message size
  • External interfaces:
  • 3 Analog or Digital In/Out
  • 1 RS232, 1 RS485
  • Customisation:
  • Lua-based plugins
  • Environmental:
  • -40°C to +85°C operating temperature
  • IP67 dust and water ingress

Skywave IDP-680/IDP-690 should be setup before it could be connected to Wialon GPS tracking software. Please find below pre-configured packages:

  • IDP-680 / IDP-690 with Omnicomm FLS, panic button and/or a door sensor
  • IDP-680 / IDP-690 with Technoton FLS, panic button and/or a door sensor
  • This profiles contain a document which combines information on basic and advanced configurations. Basic instruction is for readers with no technical background to ensure successful basic installation and operation of IDP 600 series terminals with an AVL service + FLS API service, panic button and/or door sensor. Advanced installation is meant for software developers and technical project leaders working in organizations configuring AVL Agent + FLS API service, panic button and/or door sensor using IDP 600 series mobile devices.

  • IDP-680 / IDP-690 with panic button and/or a door sensor
  • This profile contains a document which combines information on basic and advanced configurations. Basic instruction is for readers with no technical background to ensure successful basic installation and operation of IDP 600 series terminals with an AVL service, panic button and/or door sensor. Advanced installation is meant for software developers and technical project leaders working in organizations configuring AVL Agent service using IDP 600 series mobile devices.

Evaluation Kits are available for testing. Other packages could be pre-configured upon request. Contact SkyWave for more information.

More devices from the manufacturer