Number of units
The following data should also be added to BSTPL 17IS CAN unit properties section of Wialon GPS tracking software :
| Device type: | BSTPL 17IS CAN |
| Unique ID: | imei |
Specify the following parameters in configuration software or configuration BSTPL 17IS CAN for use in Wialon Hosting :
| Server port: | 22450 |
3 units of BSTPL 17IS CAN device type are connected to Wialon Data Center. This represents 0% of all Asset trackers connected.
Below chart represents the dynamic of connections in the last 30 days:
| Parameter name | Description | Units |
|---|---|---|
| box_status | Box open\close status
|
|
| gsm_signal | GSM Signal quality |
|
| main_bat_status | Main Battery status:
|
|
| pwr_int | Main battery voltage |
V |
| veh_speed_can | Speed of vehicle from CAN bus |
km\h |
| tot_high_volt | Total high voltage in the battery of vehicle. |
|
| tot_current | Total current flowing in the battery of vehicle |
|
| soc | State of Charge of the battery |
|
| mileage | Total accumulated mileage of the vehicle |
|
| gear_position | Current gear position of the vehicle |
|
| pwr_bat_fail | Status indicating if there is a failure in the power battery.
|
|
| pwr_bat_overheat | Status indicating if the power battery is overheating
|
|
| pwr_fail | Status indicating if there is a failure in the powertrain.
|
|
| motor_overheat | Status indicating if the motor is overheating
|
|
| control_overheat | Status indicating if the control system is overheating.
|
|
| steer_sys_malfunc | Status indicating a malfunction in the steering system.
|
|
| bat_min_temp | Minimum temperature recorded for the battery |
C |
| min_cell_volt | Minimum voltage recorded among the individual cells of the battery |
V |
| battery_charging | Status indicating if the battery is currently being charged
|
|
| tms_cool_out_temp | Temperature of the coolant output in the Thermal Management System (TMS). |
C |
| motor_temp_lh_rh | Average Temperature of the left-hand and right-hand motors. |
C |
| motor_rpm_lh_rh | Average RPM of the left-hand and right-hand motors |
|
| dc_out_volt | Voltage level of the DC-DC converter output |
V |
| dc_in_volt | Voltage level of the DC-DC converter input |
V |
| dc_temp | Temperature of the DC-DC converter. |
C |
| steer_invert_in_volt | Input voltage level of the steering inverter |
V |
| steer_invert_out_volt | Output current of the steering inverter |
V |
| steer_motor_rpm | RPM of the steering motor |
|
| air_comp_in_volt | Input voltage level of the air compressor inverter |
V |
| air_comp_out_volt | Output voltage level of the air compressor inverter |
V |
| air_comp_motor_rpm | RPM of the air compressor motor |
|
| air_press_1 | Pressure measurement from air pressure sensor 1. |
|
| air_press_2 | Pressure measurement from air pressure sensor 2. |
|
| acc_pedal_in | Input value of the accelerator pedal |
|
| brake_pedal_in | Input value of the brake pedal. |
|
| left_charging_status | Charging status of the left side (possibly referring to a dual-charging system) |
|
| battery_max_temp | Maximum recorded temperature of the battery. |
C |
| max_cell_volt | Maximum recorded voltage among the individual cells of the battery |
|
| discharge_curr | Current flowing during discharging of the battery |
|
| source | Show if the data was buffered or realtime data Values:
|
