Volvo Connect

Volvo Connect
Manufacturer: Volvo Trucks
Forum Discussion

Number of units

1
Online
3
Total

The following data should also be added to Volvo Connect unit properties section of Wialon GPS tracking software:

Device type: Volvo Connect
Unique ID: custom (VIN)

3 units of Volvo Connect device type are connected to Wialon Data Center. This represents 0% of all Protocols and retranslators connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
trigger_type

Report trigger type

Trigger types for Context=RFMS: TIMER, DRIVER_LOGIN, DRIVER_LOGOUT, IGNITION_ON, IGNITION_OFF, PTO_ENABLED, PTO_DISABLED, TELL_TALE, DISTANCE_TRAVELLED, ENGINE_ON, ENGINE_OFF, DRIVER_1_WORKING_STATE_CHANGED, DRIVER_2_WORKING_STATE_CHANGED, Trigger types for Context=VOLVO GROUP GEOFENCE, DTJ_ACTIVITY, CARGO_DOOR, CARGO_DEFROST, DRIVING_WITHOUT_BEING_LOGGEDIN, FUELLEVEL_CHANGED_WHILE_OFF, ADBLUELEVEL_CHANGED_WHILE_OFF,DTM, STATUS_ON_DEMAND, COLLISION_MITIGATION, FLEET_OVERSPEED, TACHO_OUT_OF_SCOPE_MODE, IDLING, TIRE_WARNING, MOVEMENT, NO_MOVEMENT, TEMPERATURE_ALARM, ADBLUELEVEL_LOW, WITHOUT_ADBLUE

trigger_context

The context defines if this is part of the standard or OEM specific. rFMS standard values VOLVO TRUCKS, SCANIA, DAIMLER, IVECO, DAF, MAN, RENAULT TRUCKS, VDL, VOLVO BUSES If the Trigger is defined in the rFMS standard, the Context = RFMS

tco_driver0_id

The unique identification of a driver in a Member State
Driver 1

card0_state

The country alpha code of the Member State having issued the card.
Driver 1

driver0_equip

Code to distinguish different types of equipment for the tachograph application
Driver 1

card0_repl_ind

A card replacement index
Driver 1

card0_renew_ind

A card renewal index
Driver 1

taho_speed

Tachograph vehicle speed in km/h (Speed of the vehicle registered by the tachograph)

km/h
tco_driver1_id

The unique identification of a driver in a Member State
Driver 1

card1_state

The country alpha code of the Member State having issued the card.
Driver 1

driver1_equip

Code to distinguish different types of equipment for the tachograph application
Driver 1

card1_repl_ind

A card replacement index
Driver 1

card1_renew_ind

A card renewal index
Driver 1

tco_driver2_id

The unique identification of a driver in a Member State
Driver 2

card2_state

The country alpha code of the Member State having issued the card.
Driver 2

driver2_equip

Code to distinguish different types of equipment for the tachograph application
Driver 2

card2_repl_ind

A card replacement index
Driver 2

card2_renew_ind

A card renewal index
Driver 2

odometer

Accumulated distance travelled by the vehicle during its operation

m
engine_hours

The total hours of operation for the vehicle engine

h
gross_w

The full vehicle weight

kg
tot_fuel_used

The total fuel the vehicle has used during its lifetime

ml
doors_status

Bus specific parameter. Status of doors.
ALL_DOORS_DISABLED, AT_LEAST_ONE_DOOR_ENABLED, ERROR, NOT_AVAILABLE

door_#_en_stat

Door # status:

ENABLED, DISABLED, ERROR, NOT_AVAILABLE

door_#_open_stat

Door # open status:
CLOSED, OPEN, ERROR, NOT_AVAILABLE

door_#_lock_stat

Door # lock status:
UNLOCKED, LOCKED, ERROR, NOT_AVAILABLE

door_#_n

Door # number

time_spd_over_0

The time the vehicle speed has been over zero

s
dist_with_cruise

The distance the vehicle has been driven with cruise control active

m
time_with_cruise

The time the vehicle has been driven with cruise control active

s
fuel_with_cruise The fuel consumption the vehicle has consumed while driven with cruise control active ml
time_spd_0

The time the vehicle speed has been equal to zero. Engine on (RPM>0) and no PTO active

s
fuel_spd_0

The fuel consumption the vehicle has consumed while the vehicle speed has been equal to zero. Engine on (RPM>0) and no PTO active

ml
fuel_spd_over_0

The fuel consumption the vehicle has consumed while the vehicle speed has been over zero. Engine on (RPM>0)

ml
cnt_brake_driving

The total number of times the brake pedal has been used while the vehicle was driving

dist_brake_driving The total distance the vehicle has driven where the brake pedal has been used m
cnt_chairlift The total number of times the chairlift has been outside the bus. This is mainly used for Busses
cnt_stop_req

The total number of stop requests made. This is mainly used for Busses

cnt_knelt

The total number of times the bus has knelt.

cnt_pram_req

The total number of pram requests made. This is mainly used for Busses

pto_#_lab

Labels WHEELBASED_SPEED_OVER_ZERO, WHEELBASED_SPEED_ZERO at least one PTO on during wheelbased speed =0 counter in seconds and millilitres at least one PTO on during wheelbased speed>0 counter in seconds, millilitres (includes consumption of driving) and meter driven

pto_#_s

Labels WHEELBASED_SPEED_OVER_ZERO, WHEELBASED_SPEED_ZERO at least one PTO on during wheelbased speed =0 counter in seconds and millilitres at least one PTO on during wheelbased speed>0 counter in seconds, millilitres (includes consumption of driving) and meter driven

s
pto_#_m Labels WHEELBASED_SPEED_OVER_ZERO, WHEELBASED_SPEED_ZERO at least one PTO on during wheelbased speed =0 counter in seconds and millilitres at least one PTO on during wheelbased speed>0 counter in seconds, millilitres (includes consumption of driving) and meter driven m
pto_#_ml Labels WHEELBASED_SPEED_OVER_ZERO, WHEELBASED_SPEED_ZERO at least one PTO on during wheelbased speed =0 counter in seconds and millilitres at least one PTO on during wheelbased speed>0 counter in seconds, millilitres (includes consumption of driving) and meter driven ml
acc_pedal_pos_#_fr

Acceleration pedal position range # started from:
0,20,40,60,80

%
acc_pedal_pos_#_to

Acceleration pedal position range # ended to:
20,40,60,80,100

%
acc_pedal_pos_#_s

Duration of acceleration pedal position in range #

s
acc_pedal_pos_#_m

Distance during acceleration pedal position in range #

m
acc_pedal_pos_#_ml

Fuel consumption during acceleration pedal position was in range #

ml
acc_#_fr

Acceleration range # started from:
--, -1.1, -0.9, -0.7, -0.5, -0.3, -0.1, 0.1, 0.3, 0.5, 0.7, 1.1

m/s2
acc_#_to

Acceleration range # ended to:
-1.1, -0.9, -0.7, -0.5, -0.3, -0.1, 0.1, 0.3, 0.5, 0.7, 1.1, --

m/s2
acc_#_s

Duration of acceleration in range #

s
acc_#_m

Distance during acceleration in range #

m
acc_#_ml

Fuel consumption during acceleration in range #

ml
acc_high_#_fr

High acceleration range # started from:
--, -1.1, -0.9, -0.7, -0.5, -0.3, -0.1, 0.1, 0.3, 0.5, 0.7, 1.1

m/s2
acc_high_#_to

High acceleration range # started ended to:
--, -1.1, -0.9, -0.7, -0.5, -0.3, -0.1, 0.1, 0.3, 0.5, 0.7, 1.1

m/s2
acc_high_#_s

Duration of high acceleration in range #

s
acc_high_#_m

Distance during high acceleration in range #

m
acc_high_#_ml

Fuel consumption during high acceleration in range #

ml
ret_torq_#_fr

Retarder using range # started from:
0, 20, 40, 60, 80

%
ret_torq_#_to

Retarder using range # ended to:
20, 40, 60, 80, 100

%
ret_torq_#_s

Duration of retarder using in range #

s
ret_torq_#_m

Distance during retarder using in range #

m
ret_torq_#_ml

Fuel consumption during retarder using in range #

ml
drv_without_torq_#_lab

Driving without torque label #

drv_without_torq_#_s

Duration of driving without torque #

s
drv_without_torq_#_m

Distance during driving without torque #

m
drv_without_torq_#_ml

Fuel consumption during driving without torque #

ml
eng_torq_#_fr Actual Engine-Percent Torque range # started from:

0,10,20,30,40,50,60,70,80,90

%
eng_torq_#_to

Actual Engine-Percent Torque range # ended to:

10,20,30,40,50,60,70,80,90,100

%
eng_torq_#_s

Duration of actual engine-percent torque in range #

s
eng_torq_#_m

Distance during actual engine-percent torque in range #

m
eng_torq_#_ml

Fuel consumption during actual engine-percent torque was in range #

ml
eng_torq_curr_#_fr

Engine Percent Load At Current Speed range # started from:

0,10,20,30,40,50,60,70,80,90

%
eng_torq_curr_#_to

Engine Percent Load At Current Speed range # ended to:

10,20,30,40,50,60,70,80,90,100

%
eng_torq_curr_#_s

Duration of actual engine percent load at current speed in range #

s
eng_torq_curr_#_m

Distance during actual engine percent load at current speed in range #

m
eng_torq_curr_#_ml

Fuel consumption during actual engine percent load at current speed was in range #

ml
veh_spd_#_fr

Vehicle speed range # started from:
0

40 ranges.Discreteness 4km/h. Engine on (RPM>0)

km/h
veh_spd_#_to

Vehicle speed range # ended to:
160

40 ranges.Discreteness 4km/h. Engine on (RPM>0)

km/h
veh_spd_#_s

Duration of vehicle speed in range #

s
veh_spd_#_m

Distance during vehicle speed in range #

m
veh_spd_#_ml

Fuel consumption during vehicle speed was in range #

ml
eng_spd_#_fr

Engine RPM range # started from:

0,400,800,1200,1600,2000,2400,2800,3200,3600

rpm
eng_spd_#_to

Engine RPM range # ended to:

400,800,1200,1600,2000,2400,2800,3200,3600,4000

rpm
eng_spd_#_s

Duration of engine RPM in range #

s
eng_spd_#_m

Distance during engine RPM in range #

m
eng_spd_#_ml

Fuel consumption during engine RPM was in range #

ml
acc_dur_brake_#_fr

Acceleration during brake range # started from:
--, -1.1, -0.9, -0.7, -0.5, -0.3, -0.1, 0.1, 0.3, 0.5, 0.7, 1.1

m/s2
acc_dur_brake_#_to

Acceleration during brake range # ended to:
-1.1, -0.9, -0.7, -0.5, -0.3, -0.1, 0.1, 0.3, 0.5, 0.7, 1.1, --

m/s2
acc_dur_brake_#_s

Duration of acceleration during brake in range #

s
acc_dur_brake_#_m

Distance during acceleration during brake in range #

m
acc_dur_brake_#_ml

Fuel consumption during acceleration during brake in range #

ml
sel_gear_#_n Selected gear number.This is mainly used for Busses
sel_gear_#_s

Duration of using selected gear #

s
sel_gear_#_m

Distance during using selected gear #

m
sel_gear_#_ml

Fuel consumption during using selected gear #

ml
curr_gear_#_n

Current selected gear number.This is mainly used for Busses

curr_gear_#_s

Duration of using current selected gear #

s
curr_gear_#_m

Distance during using current selected gear #

m
curr_gear_#_ml

Fuel consumption during using current selected gear #

ml
cnt_brake_tot

The total number of times the brake pedal has been used. Not same as cnt_brake_driving, since this parameter is increased even if the vehicles speed is zero.

coasting_s

Duration of moving without acceleration (manually or cruise control)

s
coasting_m

Distance of moving without acceleration (manually or cruise control)

m
coasting_ml

Fuel consumption during moving without acceleration (manually or cruise control)

ml
eng_overload_s

Total time for the vehicle when engine load is over 90 % of its capacity

s
eng_overload_m

Distance for the vehicle when engine load is over 90 % of its capacity

m
eng_overload_ml

Fuel consumption for the vehicle when engine load is over 90 % of its capacity

ml
eng_overrev_s

Total time for the vehicle when engine is above allowed rpm, e.g. within red zone

s
eng_overrev_m

Distance for the vehicle when engine is above allowed rpm, e.g. within red zone

m
eng_overrev_ml

Fuel consumption for the vehicle when engine is above allowed rpm, e.g. within red zone

ml
eng_in_green_area_s

Total time for the vehicle within economy rpm range/green zone

s
eng_in_green_area_m

Distance for the vehicle within economy rpm range/green zone

m
eng_in_green_area_ml

Fuel consumption for the vehicle within economy rpm range/green zone

ml
eng_out_green_area_s

Total time for the vehicle above economy rpm range/green zone.

s
eng_out_green_area_m

Distance for the vehicle above economy rpm range/green zone.

m
eng_out_green_area_ml

Fuel consumption for the vehicle above economy rpm range/green zone.

ml
time_transm_#_lab

Transmission # mode:

power,manual,auto

time_transm_#_val

Total time for transmission in # mode

s
dist_convoy_w_#_lab

Vehicle different conwoy weights # label:

full,medium,light

dist_convoy_w_#_val

Vehicle distance for different conwoy weights #

m
road_overspd_s

Total time when the vehicle speed is above the fleet defined speed limit set by fleet manager

s
road_overspd_m

Distance when the vehicle speed is above the fleet defined speed limit set by fleet manager

m
road_overspd_ml

Fuel consumption when the vehicle speed is above the fleet defined speed limit set by fleet manager

ml
cnt_stop_tot How may times the vehicle is totally stopped. Speed=0.
top_gear_s Total time when the vehicle is in Top Gear mode s
top_gear_m

Distance when the vehicle is in Top Gear mode

m
top_gear_ml

Fuel consumption when the vehicle is in Top Gear mode

ml
cnt_adblue_used Total AdBlue consumed in millilitres ml
without_adblue_s

Total time without adblue

s
without_adblue_m

Distance without adblue

m
without_adblue_ml

Fuel consumption without adblue

ml
tell_tale_#

Tell tale #

oem_tell_tale_#

The OemTellTale # is only set when the TellTale # == OEM_SPECIFIC_TELL_TALE. This is an OEM specific string defining a tell tale in the OEM context.

state_tell_tale_#

The current state of the tell tale #:

RED, YELLOW, INFO, OFF, RESERVED_4, RESERVED_5, RESERVED_6, NOT_AVAILABLE

service_dist

The distance to the next service

m
cool_temp

The temperature of the coolant liquid

C
brake_air_press_1

The air pressure in circuit 1

Pa
brake_air_press_2 The air pressure in circuit 2 Pa
time_door_open

The total time at least one door has been opened in the bus. Used mainly for busses

s
alternator_status

The alternator status of the up to 4 alternators. Used mainly for busses:

NOT_CHARGING, CHARGING, ERROR, NOT_AVAILABLE


alternator_n

The alternator numer

bellow_press_front_left The bellow pressure in the front axle left side. Used mainly for busses Pa
bellow_press_front_right

The bellow pressure in the front axle right side. Used mainly for busses

Pa
bellow_press_rear_left

The bellow pressure in the rear axle left side. Used mainly for busses

Pa
bellow_press_rear_right

The bellow pressure in the rear axle right side. Used mainly for busses

Pa
eng_speed

The engine speed in

rpm
fuel_level_1

The fuel level

%
adblue_level_1

The adblue level

%
driver1_working_state

Tachograph Working state of the driver 1:

REST, DRIVER_AVAILABLE, WORK, DRIVE, ERROR, NOT_AVAILABLE

driver2_working_state

Tachograph Working state of the driver 2:

REST, DRIVER_AVAILABLE, WORK, DRIVE, ERROR, NOT_AVAILABLE

temp_ext

The Ambient air temperature

C
cargo_defrost

Status of defrost:
0 - Off;

1 - On.

cargo_door

Status of cargo door:

0 - Closed;

1 - Opened.

cargo_temp_#_id

The id of the cargo temperature sensor #

cargo_temp_#_temp

The temperature at cargo temperature sensor #

C
cargo_temp_#_alm

Status of the temperature alarm of cargo temperature sensor #:

0 - Off:

1 - On.

driver1_wait_time Waiting time for current driver 1 since midnigh
driver1_work_time

Working time for current driver 1 since midnight

axle_w_#_lab Axle weights # of the truck label
axle_w_#_val

Axle weights # of the truck value

kg
trailer_axle_w_#_lab

Axle weights # of the trailer label

trailer_axle_w_#_val

Axle weights # of the trailer value

kg
trailer_tot_w The total weight of the trailer kg

Contact Gurtam and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone