TP-200 Pet GPS Tracker

TP-200 Pet GPS Tracker
Manufacturer: Toptraking
Forum Discussion

Number of units

Supported in Wialon:
  • Communication via TCP

The following data should also be added to TP-200 Pet GPS Tracker unit properties section of Wialon GPS tracking software:

Device type: TP-200 Pet GPS Tracker
Unique ID: imei

Specify the following parameters in configuration software or configuration TP-200 Pet GPS Tracker for use in Wialon Hosting:

Server port: 21290

7 units of TP-200 Pet GPS Tracker device type are connected to Wialon Data Center. This represents 0.04% of all Personal trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
battery battery charge left %
gsm GSM signal strength
event_code 4 byte flag. Each bit means the event, bits are numbered from right to left (23/22/21/.../3/2/1/0)
Bit number Meaning
1 to 0 00 means no GPS signal, no GSM locating; 01 means GPS signal fixed, no GSM locating; 10 means GSM locating fixed, no GPS signal;
3 to 2 00 means GPS chip works. 01 means GPS chip failed.
4 N/A
5 N/A
6 1 means SOS alarm. 0 means no SOS alarm
7 1 means over-speed alarm. 0 means no over-speed alarm
8 1 means fall down alarm. 0 means no fall down alarm
9 1 means GEO fence 1 alarm. 0 means no GEO fence 1 alarm
10 1 means GEO fence 2 alarm. 0 means no GEO fence 2 alarm
11 1 means GEO fence 3 alarm. 0 means no GEO fence 3 alarm
12 1 means low battery alarm. 0 means no battery alarm
14 1 means motion alarm. 0 means no motion alarm
15 1 means movement alarm. 0 means no movement alarm
20 to 16 it means GSM signal strength. Since those bits are taken out into "gsm" parameter, one should use "gsm" parameter
21 1 means device turned on
22 1 means device is charging. 0 means device is not charging

A mini gps tracker for pets (cats & dogs) and animals in general.