Teltonika MH2000

Features Teltonika MH2000:

Blackbox

Supported in Wialon:

Discontinued
SMS sending of data
Remote management via SMS
Communication via TCP
Communication via UDP

The following data should also be added to Teltonika MH2000 unit properties section of Wialon GPS tracking software:

Device type:	Teltonika MH2000
Unique ID:	imei

Specify the following parameters in configuration software or configuration Teltonika MH2000 for use in Wialon Hosting:

Server port:

20344

0 units of Teltonika MH2000 device type are connected to Wialon Data Center. This represents 0% of all Personal trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
battery_charge	Battery charge
canN	CAN specific data (I/O property 145-154)
counter1	Fuel Counter (I/O property 76)
driver_code	Shows the moment of binding/unbinding a driver: 1 - binding 0 - unbinding
driver_status	Garmin driver status
gsm	GSM signal strength level 0 (lowest) – 5 (highest) (I/O property 21)
hdop	Horizontal Dilution of Precision (I/O property 20 or 182)
last_driver_status	Last Garmin driver status
paramN	Value of special I/O property, where N - ID of property
pdop	Position Dilution of Precision (I/O property 22)
priority	Message Priority: 0 - low 1 - high 2 - panic 3 - security
pwr_ext	Power supply voltage (I/O property 66)	V
pwr_int	Battery voltage (I/O property 67)	V
vdop	Vertical Dilution of Precision (I/O property 21)

You may also download a sample of Teltonika MH2000 configuration for connecting it to GPS tracking software.

You can also download an example of object configuration file for Teltonika MH2000 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with sensors.

For communication via SMS, enter "login password" defined for the device and divided by the space in the "Device access password" field of the GPS unit in Wialon GPS tracking software.

To support «24 SMS in 1» mode, the interval between the points should be 900 seconds as it is on the server, i.e. the value should be 900000 ms in the device configuration.

Fill out a request form to get started with Wialon