Ruptela Trace5 NA

Features Ruptela Trace5 NA:

4G/LTE

Can be supported upon request:

ECO driving

The following data should also be added to Ruptela Trace5 NA unit properties section of Wialon GPS tracking software:

Device type:	Ruptela Trace5 NA
Unique ID:	imei

Specify the following parameters in configuration software or configuration Ruptela Trace5 NA for use in Wialon Hosting:

Server port:

21998

24 units of Ruptela Trace5 NA device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
avl_driver	IButton value
axle_N_weight	Axle N weight
bat_alertN	Tire N sensor battery alert. 0 - no warning, 1 - warning
battery	Battery Voltage
battery_current	Battery Current
can_acc_pedal	CANBUS AccPedal position
can_amb_air_temp	CANBUS ambient air temperature
can_axle_loc	CANBUS Axle location
can_axle_weight	CANBUS Axle1 weight
can_breaks	CANBUS BreakS
can_clutchs	CANBUS ClutchS
can_coolant_temp	CANBUS coolant temperature
can_cruisecs	CANBUS CruiseCS
can_diagnostic	CANBUS diagnostics supported
can_distance	CANBUS Distance
can_driver1_card	CANBUS driver 1 card
can_driver1_state	CANBUS driver 2 state
can_driver1_time	CANBUS driver 1 time
can_driver2_card	CANBUS driver 2 card
can_driver2_time	CANBUS driver 2 time
can_eng_hours	CANBUS Engine Hours
can_eng_plcs	CANBUS Engine PLCS
can_first_driver_id1	CANBUS First Driver Id 1
can_first_driver_id2	CANBUS First Driver Id 2
can_fms	CANBUS FMS software
can_fuel_economy	CANBUS fuel economy
can_fuel_rate	CANBUS fuel rate
can_fuel_used	CANBUS Fuel used
can_handle_inf	CANBUS handling information
can_hfrc	CANBUS HRFC
can_horas	CANBUS horas
can_over_speed	CANBUS over speed
can_pto	CANBUS PTO
can_ptostate	CANBUS PTOstate
can_request	CANBUS request supported
can_rpm	CANBUS RPM
can_second_driver_id1	CANBUS Second Driver Id 1
can_second_driver_id2	CANBUS Second Driver Id 2
can_service_dist	CANBUS service distance
can_sys_event	CANBUS system event
can_techograph	CANBUS tachograph
can_tech_org_speed	CANBUS tachograph vehicle speed
can_tech_perf	CANBUS tachograph performance
can_temp_refr	CANBUS refrigerator temperature
can_tire_loc	CANBUS Tire location
can_veh_id	CANBUS Vehicle Full Id
can_veh_id1	CANBUS Vehicle Id 1
can_veh_id2	CANBUS Vehicle Id 2
can_veh_id3	CANBUS Vehicle Id 3
can_veh_motion	CANBUS vehicle motion
can_wbspeed	CANBUS WBSpeed
com_loss_alertN	Sensor loss of communication alert. 0 - no warning, 1 - loss of communication
course_record	Course record
current_profile	Current Profile
ddd	Smart card data
distance_record	Distance record
driver_act	Driver activity
driver_status_changed	Shows if driver status has changed
driver_status	Driver status
eng_rpm_max	Engine RPM max
eng_rpm_min	Engine RPM min
eng_temp	Engine temperature
eng_temp_max	Engine temperature max
eng_temp_min	Engine temperature min
fuel_lvl	Fuel level	%
gsm_operator	GSM Operator
gsm_signal	GSM Signal Strength
harsh_braking	Harsh braking
hdop	HDOP
ID	IButton value
io_1_24	Tacho_ddd_available
io_1_25	Security_info
io_2_18	Fuel counter 1
io_2_19	Fuel counter 2
io_2_20	Fuel counter 3
io_2_21	Fuel counter 4
io_4_31	External PDFD panel info
io_caused	IO Data ID which caused record
io_N_M	Number M parameter of N bytes
last_driver_status	Last driver status
leak_alertN	Tire N leakage alert. 0 - no warning, 1 - leakage detected
modem_temp	Modem temperature
movement_sens	Movement Sensor
msg_received	Garmin text message has been received
msg_status_received	Garmin status message has been received
odometer	Virtual Odometer
pcb_temp	PCB Temperature
power	Power Supply Voltage
pr_thN	Tire N Pressure Threshold Detection. Indicates the pressure state of tire N. States: 0 - extreme over pressure, 1 - over pressure, 2 - no warning pressure, 3 - under pressure, 4 - extreme under pressure, 5 - not defined, 6 - error indicator, 7 - not available
rcu_statusN	Tire N RCU status. 0 - no warning, 1 - loss of RF reception function, 2 - loss of RS485 network communication, 4 - loss of CAN network communication
return can_direction	CANBUS direction indicator
s_modeN	Tire N sensor mode
speed_max	Max speed
speed_min	Min speed
tco_distance	TCO Dsitance
tco_driver1_card	TCO first driver card
tco_driver1_id	TCO first Driver Full ID
tco_driver1_id1	TCO first Driver ID 1
tco_driver1_id2	TCO first Driver ID 2
tco_driver1_state	TCO first driver state
tco_driver2_card	TCO second driver card
tco_driver2_id	TCO second Driver Full ID
tco_driver2_id1	TCO second Driver ID 1
tco_driver2_id2	TCO second Driver ID 2
tco_driver2_state	TCO second driver state
tco_reg_num1	TCO registration number 1
tco_reg_num2	TCO registration number 2
tco_rpm	TCO RPM
tco_trip	TCO trip
tco_veh_id	TCO Vehicle Full ID
tco_veh_id1	TCO Vehicle ID 1
tco_veh_id2	TCO Vehicle ID 2
tco_veh_id3	TCO Vehicle ID 3
tco_veh_speed	TCO vehicle speed
temp_sens_0	Temperature Sensor 0
temp_sens_1	Temperature Sensor 1
temp_sens_2	Temperature Sensor 2
temp_sens_id0	Temp sensor ID 0
temp_sens_id1	Temp sensor ID 1
temp_sens_id2	Temp sensor ID 2
time_record	Time record
tire_locN	Tire N location. The low order 4 bits represent a position number, counting left to right when facing in the direction of normal vehicle travel (forward). The high order 4 bits (MSB) represent a position number, counting front to back on the vehicle
tire_pressureN	Tire N pressure	kPa
tire_tempN	Tire N temperature	°C
t_thN	Tire N Temperature Threshold Detection. Indicates the temperature state of tire N. States: 0 - over temperature, 1 - no warning temperature, 2 - under temperature, 3 - not available / error indicator / not defined
vehicle_dist	Vehicle distance
accelerometer_x/y/z	X/Y/Z-axis acceleration
engine_on	ECO engine on timer (IO 139)	s
wln_accel_max	maximum acceleration value	g
wln_brk_max	maximum deceleration value	g
wln_crn_max	cornering	g