GPS Padlock G-400

GPS Padlock G-400
Forum Discussion

Number of units

Features GPS Padlock G-400:
  • Blackbox
  • E-seal

The following data should also be added to GPS Padlock G-400 unit properties section of Wialon GPS tracking software:

Device type: GPS Padlock G-400
Unique ID: custom

Specify the following parameters in configuration software or configuration GPS Padlock G-400 for use in Wialon Hosting:

Server port: 21411

881 units of GPS Padlock G-400 device type are connected to Wialon Data Center. This represents 2.27% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
alarm_flag Alarm (bitwise parameter, 1 - active, 0 - not active):
bit2 - Over Speed
bit3 - Fatigue Driving
bit5 - GNSS module malfunction
bit6 - GNSS antenna disconnection
bit7 - GNSS antenna short-circuit
bit8 - Device low battery
bit9 - Device power down
bit20 - Over time Parking
state_flag Status (bitwise parameter):
bit2 - 0: No Position, 1: Positioned
mileage Mileage km
lock_st Lock Status:
1 - Close (Bracket in the hole)
0 - Open (Bracket out from hole)
seal_st Seal Status:
1 - Seal
0 - Unseal
pwr_int Battery voltage V
tear_dw_st Tear Down Status:
0 - Normal (lock body not be opened);
1 - Been tear down
rp_rs Report Reason:
0 - Scheduled report
1 - Lock status changed
2 - Tear Down Status Changed
3 - Press Seal
4 - RFID Seal
5 - RFID Unseal
6 - SMS Seal
7 - SMS Unseal
8 - Low battery and sleep
9 - Invalid Card Seal
A - Invalid Card Unseal
B - Valid Card Seal
C - Valid Card Unseal
D - NFC Seal
E - NFC Unseal
F - Platform Seal
G - Platform Unseal
H - Invalid Card Close (When unseal, this card close physical lock)
I - Invalid Card Open (When unseal, this card open physical lock)
J - Valid Card Close (Similar with H)
K - Valid Card Open
L - Sub-lock (bracket) be opened in seal condition
M - Sub-lock tear down (lock body be opened) in seal condition
N - Sub-lock communication time out
O - Sub-lock status changed
P - Card Seal in illegal area
Q - Card Unseal in illegal area
R - Auto Unseal in designated area
S - Auto seal in designated area
T - Emergency password unseal
op_id Operate ID
s_lock_stN Sub-lovk status with N number:
0 - Unbind
1 - Bind
2 - Status OFF
3 - Status ON
4 - Damaged
5 - Communicate Over Time
usr_b_id User Business ID
cmd_name Command name
cmd_result Result of command

More devices from the manufacturer

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*