Equipo de videovigilancia JC400 | Integrado con Wialon

Soportado en Wialon:

Guardado de vídeos de eventos
Transmisión en directo
Guardado manual de vídeos
Reproducción de grabaciones

Para que el sistema de rastreo Wialon identifique los datos de JC400 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	JC400
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración JC400 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22049

En el centro de servicio Wialon se utilizan 235 unidades JC400 — es 2.45% de la cantidad total de dispositivos Video monitoring conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
alarm_type	0x80 Vibration 0x86 SD card cannot be recognized 0x88 Power removal 0x87 Over speed 0x90 Harsh acceleration 0x91 Harsh deceleration 0x92 Harsh turning 0x93 Crash 0x01 SOS 0x8A Oil or electronics connected 0x8B Oil or electronics disconnected 0x47 Fatigue driving 0x69 File uploading 0x70 SD card mount 0x53 Fuel stolen 0x73 Fuel data timeout 0x76 Temperature data timeout 0x0E External battery low 0xA5 RFID reading 0x8C DMS – Eye closed 0x8F DMS - Distraction 0XA0 DMS - Yawn 0x9A DMS - Smoking 0x97 DMS - Phone calling 0x94 DMS - Missing face 0XA1 DMS - Monitoring shelter 0xA2 DMS – Calibration fail 0xA3 DMS - Look down
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
voltage_lvl	The range is 0~6 defining the voltage is from low to high. 0: No Power (shutdown) 1: Extremely Low Battery 2: Very Low Battery 3: Low Battery 4: Medium 5: High 6: Very High
gsm	GSM Signal Strength Levels 0: no signal; 1: extremely weak signal; 2: very weak signal; 3: good signal; 4: strong signal.
tr_status	Bitmask representing different terminal statuses. Bit7 1:Oil/Electricity cutoff 0:Oil/Electricity on Bit6 0: GPS tracking is off 1: GPS tracking is on Bit3~Bit5 Extended bit Bit2 0: Charge Off 1: Charge On Bit1 1: ACC high 0: ACC Low Bit0 0: Disarm 1:Arm
acc	1: ACC high 0: ACC Low
up_mode	Data Upload Mode: (could be only one mode available) 0 upload by time interval 1 upload by distance 2 upload for corner correction 3 upload by ACC status change 4 Re-upload last valid locating point after shift from dynamic motion to static position 5 Report last valid locating point after network reconnected. 6 Update the ephemeris to upload locating point. 7 Press to upload locating point 8 Power on to upload locating point 9 Power on and change locating point by GPS based station.

Nombre del parámetro

Descripción

Unidades de medida

alarm_type

0x80 Vibration

0x86 SD card cannot be recognized

0x88 Power removal

0x87 Over speed

0x90 Harsh acceleration

0x91 Harsh deceleration

0x92 Harsh turning

0x93 Crash

0x01 SOS

0x8A Oil or electronics connected

0x8B Oil or electronics disconnected

0x47 Fatigue driving

0x69 File uploading

0x70 SD card mount

0x53 Fuel stolen

0x73 Fuel data timeout

0x76 Temperature data timeout

0x0E External battery low

0xA5 RFID reading

0x8C DMS – Eye closed

0x8F DMS - Distraction

0XA0 DMS - Yawn

0x9A DMS - Smoking

0x97 DMS - Phone calling

0x94 DMS - Missing face

0XA1 DMS - Monitoring shelter

0xA2 DMS – Calibration fail

0xA3 DMS - Look down

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Cell Tower ID

voltage_lvl

The range is 0~6 defining the voltage is from low to high.
0: No Power (shutdown)
1: Extremely Low Battery
2: Very Low Battery
3: Low Battery
4: Medium
5: High
6: Very High

gsm

GSM Signal Strength Levels
0: no signal;
1: extremely weak signal;
2: very weak signal;
3: good signal;
4: strong signal.

tr_status

Bitmask representing different terminal statuses.
Bit7
1:Oil/Electricity cutoff
0:Oil/Electricity on
Bit6
0: GPS tracking is off
1: GPS tracking is on
Bit3~Bit5
Extended bit
Bit2
0: Charge Off
1: Charge On
Bit1
1: ACC high
0: ACC Low
Bit0
0: Disarm
1:Arm

acc

1: ACC high
0: ACC Low

up_mode

Data Upload Mode:
(could be only one mode available)
0 upload by time interval
1 upload by distance
2 upload for corner correction
3 upload by ACC status change
4 Re-upload last valid locating point after shift from dynamic motion to static position
5 Report last valid locating point after network reconnected.
6 Update the ephemeris to upload locating point.
7 Press to upload locating point
8 Power on to upload locating point
9 Power on and change locating point by GPS based station.

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Gurtam products

Soluciones de nicho para satisfacer las tareas específicas

JC400

Otros dispositivos del fabricante

Contacte con Gurtam y logre los objetivos más ambiciosos con la telemática

Hacerse socio

Solicite Wialon en su región

Por favor, llene la solicitud para iniciar el trabajo con Wialon