Видеоустройство JC400 | Интегрирован с Wialon

Поддержано в Wialon:

Сохранение файлов по событиям
Трансляция онлайн

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от JC400 в диалоге настроек объекта, укажите следующие данные:

Тип устройства:	JC400
Уникальный ID:	imei

Укажите следующие параметры в конфигурационной программе или в конфигурации JC400 для использования его в Wialon Hosting:

Порт сервера:

22049

Всего в серверном центре Wialon используется 129 объектов JC400 — это составляет 1.45% от общего количества устройств в категории «Видео мониторинг».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
alarm_type	Alarm Type: 1: SOS alarm 9:displacement alarm 128: vibration alarm 129:Excess data traffic alarm 130:Device reboot 131:collision alarm 132: forward camera abnormal 133: inward camera abnormal 134:SD card can’t be identified 135:overspeed alarm 136:power off alarm 137: no inward camera 138:Enable power/oil cutoff alarm 139:Disable power/oil cutoff alarm 144: harsh acceleration alarm 145: harsh deceleration alarm 146:sharp turn alarm 147: collision alarm
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
voltage_lvl	The range is 0~6 defining the voltage is from low to high. 0: No Power (shutdown) 1: Extremely Low Battery 2: Very Low Battery 3: Low Battery 4: Medium 5: High 6: Very High
gsm	GSM Signal Strength Levels 0: no signal; 1: extremely weak signal; 2: very weak signal; 3: good signal; 4: strong signal.
tr_status	Bitmask representing different terminal statuses. Bit7 1:Oil/Electricity cutoff 0:Oil/Electricity on Bit6 0: GPS tracking is off 1: GPS tracking is on Bit3~Bit5 Extended bit Bit2 0: Charge Off 1: Charge On Bit1 1: ACC high 0: ACC Low Bit0 0: Disarm 1:Arm
acc	1: ACC high 0: ACC Low
up_mode	Data Upload Mode: (could be only one mode available) 0 upload by time interval 1 upload by distance 2 upload for corner correction 3 upload by ACC status change 4 Re-upload last valid locating point after shift from dynamic motion to static position 5 Report last valid locating point after network reconnected. 6 Update the ephemeris to upload locating point. 7 Press to upload locating point 8 Power on to upload locating point 9 Power on and change locating point by GPS based station.

Имя параметра

Описание

Единицы измерения

alarm_type

Alarm Type:
1: SOS alarm
9:displacement alarm
128: vibration alarm
129:Excess data traffic alarm
130:Device reboot
131:collision alarm
132: forward camera abnormal
133: inward camera abnormal
134:SD card can’t be identified
135:overspeed alarm
136:power off alarm
137: no inward camera
138:Enable power/oil cutoff alarm
139:Disable power/oil cutoff alarm
144: harsh acceleration alarm
145: harsh deceleration alarm
146:sharp turn alarm
147: collision alarm

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Cell Tower ID

voltage_lvl

The range is 0~6 defining the voltage is from low to high.
0: No Power (shutdown)
1: Extremely Low Battery
2: Very Low Battery
3: Low Battery
4: Medium
5: High
6: Very High

gsm

GSM Signal Strength Levels
0: no signal;
1: extremely weak signal;
2: very weak signal;
3: good signal;
4: strong signal.

tr_status

Bitmask representing different terminal statuses.
Bit7
1:Oil/Electricity cutoff
0:Oil/Electricity on
Bit6
0: GPS tracking is off
1: GPS tracking is on
Bit3~Bit5
Extended bit
Bit2
0: Charge Off
1: Charge On
Bit1
1: ACC high
0: ACC Low
Bit0
0: Disarm
1:Arm

acc

1: ACC high
0: ACC Low

up_mode

Data Upload Mode:
(could be only one mode available)
0 upload by time interval
1 upload by distance
2 upload for corner correction
3 upload by ACC status change
4 Re-upload last valid locating point after shift from dynamic motion to static position
5 Report last valid locating point after network reconnected.
6 Update the ephemeris to upload locating point.
7 Press to upload locating point
8 Power on to upload locating point
9 Power on and change locating point by GPS based station.

Заполните заявку для начала работы с Wialon

Продукты компании Gurtam

Нишевые продукты для решения точечных задач

JC400

Другие устройства производителя

Новости

Заполните заявку для начала работы с Wialon