JM-VL502

JM-VL502
Discusión en el foro

Cantidad de unidades

0
En línea
16
Total
Características JM-VL502:
  • 2G
  • 4G/LTE
  • Caja negra
  • BLE

Para que el sistema de rastreo Wialon identifique los datos de JM-VL502 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: JM-VL502
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración JM-VL502 para utilizarlos en Wialon Hosting :

Puerto del servidor: 22278

En el centro de servicio Wialon se utilizan 16 unidades JM-VL502 — es 0.02% de la cantidad total de dispositivos OBD conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
value_data_[NUM]

Describes the specific information of current alarm or driving behavior

trans_type

Transparent message type. Trans_type has that values

00
Detailed GNSS Module Positioning Data
0B nformation of Road Transport IC Card License
41 Over-serial port 1 transparent transmission
42 Over-serial port 2 transparent transmission
0F For uplink transparent transmission of vehicle data
F1 For downlink transparent transmission of the platform data
F2-FE For future expansion
FF ransparent transmission of entire protocol data packets, thus to achieve transparent transmission of protocol packets between terminals and platforms, that is, protocol for protocol transparent transmission.

status

Status flag of the tracker. It's a bitwise variable where each bit definies the specific value.


Bit Status
Bit 0 0: ACC Off 1: ACC On
Bit 1 0: Not located 1: Located
Bit 2 0: North latitude 1: South latitude
Bit 3 0: East longitude 1: West longitude
Bit 4 0: In operation; 1: Out of operation
Bit 5 0: Latitude and longitude are not encrypted by the secret plugin; 1: Latitude and longitudehave been encrypted by the secret plugin
Bit 6~7 Reserved
Bit 8-9 00: Empty; 01: Half-loaded; 10: Reserved; 11: Full-load (Input manually or acquired by the sensor
Bit 10 0: The vehicle oil circuit is normal; 1: The vehicle oil circuit is disconnected
Bit 11 0: The vehicle circuit is normal; 1: The vehicle circuit is disconnected
Bit 12 0: Door unlocked; 1: Door locked
Bit 13 0: Door 1 closed; 1: Door 1 open (front door)
Bit 14 0: Door 2 closed; 1: Door 2 open (middle door)
Bit 15 0: Door 3 closed; 1: Door 3 open (rear door)
Bit 16 0: Door 4 closed; 1: Door 4 open (driver-side door)
Bit 17 0: Door 5 closed; 1: Door 5 open (user-defined)
Bit 18 0: Positioning without GPS satellites; 1: Positioning with GPS satellites
Bit 19 0: Positioning without BD satellites; 1: Positioning with BD satellites
Bit 20 0: Positioning without GLONASS satellites; 1: Positioning with GLONASS satellites
Bit 21 0: Positioning without Galileo satellites; 1: Positioning with Galileo satellites
Bit 22~28 Reserved
Bit 29~30 Positioning Type 00: GNSS; 01: LBS; 10: INS; 11: Reserved
Bit 31 0: Real-time location data; 1: Buffered data

system_id_[NUM]

id of the system that has trouble code, trouble is listed in det_descr_[NUM]

data_id_[NUM]

Id of the alarm and driving behavior. It's a bitwise variable where each bit definies the specific value.


0x00 BYTE[0]_Bit0 Hardware failure alert during device self-check
0x01 BYTE[0]_Bit1 Terminal plug-in alarm
0x02 BYTE[0]_Bit2 Terminal plug-out alarm
0x03 BYTE[0]_Bit3 High voltage alarm
0x04 BYTE[0]_Bit4 Low voltage alarm
0x05 BYTE[0]_Bit5 High water temperaturealarm
0x06 BYTE[0]_Bit6 Low water temperaturealarm
0x07 BYTE[0]_Bit7 High oil temperaturealarm
0x08 BYTE[1]_Bit0 High fuel temperaturealarm
0x09 BYTE[1]_Bit1 High oil pressure alarm
0x0A BYTE[1]_Bit2 Abnormal tire pressurealarm
0x0B BYTE[1]_Bit3 Low fuel alarm
0x0C BYTE[1]_Bit4 Feed reminder
0x0D BYTE[1]_Bit5 Excessively longpreheating duration alarm
0x0E BYTE[1]_Bit6 Overrun idling time alarm
0x0F BYTE[1]_Bit7 Driving on low fuel
0x10 BYTE[2]_Bit0 Cold-started car driving at high speed
0x11 BYTE[2]_Bit1 Driving at night without lights
0x12 BYTE[2]_Bit2 Driving when the handbrake is not released
0x13 BYTE[2]_Bit3 Driving with doors open
0x14 BYTE[2]_Bit4 Driving with doors unlocked
0x15 BYTE[2]_Bit5 Driving with trunk open
0x16 BYTE[2]_Bit6 Coasting in neutral alarm
0x17 BYTE[2]_Bit7 Driver not buckled up
0x18 BYTE[3]_Bit0 Passenger not buckled up
0x19 BYTE[3]_Bit1 Quick fuel up alarm
0x1A BYTE[3]_Bit2 Sudden acceleration alarm
0x1B BYTE[3]_Bit3 Hard braking alarm
0x1C BYTE[3]_Bit4 Sharp turn alarm
0x1D BYTE[3]_Bit5 Rapid lane change alarm
0x1E BYTE[3]_Bit6 Crossing multiple lanes at once alarm
0x1F BYTE[3]_Bit7 Continuous lane change alarm
0x20 BYTE[4]_Bit0 Emergency alarm
0x21 BYTE[4]_Bit1 Left geofence alarm
0x22 BYTE[4]_Bit2 Entered geofence alarm
0x23 BYTE[4]_Bit3 Fatigue driving
0x24 BYTE[4]_Bit4 Cumulative driving duration over threshold
0x25 BYTE[4]_Bit5 Speed driving
0x26 BYTE[4]_Bit6 Ordinary vehicle collision
0x27 BYTE[4]_Bit7 Severe vehicle collision
0x28 BYTE[5]_Bit0 Vehicle rollover
0x29 BYTE[5]_Bit1 Brake down for a long time
0x2A BYTE[5]_Bit2 Clutch down for a long time
0x2B BYTE[5]_Bit3 Riding the clutch
0x2C BYTE[5]_Bit4 Gear alert
0x2D BYTE[5]_Bit5 Parking withoutengaging the P/N gear
0x2E BYTE[5]_Bit6 Collision alert when parking
0x2F BYTE[5]_Bit7 Fuel theft reminder
0x30 BYTE[6]_Bit0 Tow Reminder
0x31 BYTE[6]_Bit1 Doors open alert
0x32 BYTE[6]_Bit2 Doors unlock alert
0x33 BYTE[6]_Bit3 Windows open alert
0x34 BYTE[6]_Bit4 Trunk open alert
0x35 BYTE[6]_Bit5 Sunroof open alert
0x36 BYTE[6]_Bit6 Fuel cap open alert
0x37 BYTE[6]_Bit7 Lights left on
0x38 BYTE[7]_Bit0 Ignition on reminder
0x39 BYTE[7]_Bit1 Ignition off reminder
0x3A BYTE[7]_Bit2 Wake-up alert
0x3B BYTE[7]_Bit3 Abnormal alarm when the urea level remain unchanged
0x3C BYTE[7]_Bit4 Alarm for increased urea level
0x3D BYTE[7]_Bit5 Alarm for driving with vehicle malfunction Eco-friendly project
0x3E BYTE[7]_Bit6 Abnormal fuel level alarm


Otros dispositivos del fabricante

Contacte con Gurtam y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono