Prime AT NG

Prime AT NG
Fabricante: Micron
Discusión en el foro

Cantidad de unidades

0
En línea
2
Total
Características Prime AT NG:
  • Caja negra
  • Posicionamiento Wi-Fi

Para que el sistema de rastreo Wialon identifique los datos de Prime AT NG en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: Prime AT NG
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Prime AT NG para utilizarlos en Wialon Hosting :

Puerto del servidor: 22187

En el centro de servicio Wialon se utilizan 2 unidades Prime AT NG — es 0.01% de la cantidad total de dispositivos Personal conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
gps_acc GPS accuracy
battery The current volume of the backup battery %
rep_type Type of report:
Type of the report:
FRI - Fixed Report Information
GEO - Geo-Fence Information
SPD - Speed Alarm
SOS - SOS report
RTO - Real Time Operation
PNL - The first location after the device powers on
NMR - Non movement is detected by motion sensor
DIS - The status of digital input is detected being changed
HIS - History report
INF - Device Information Report
WIF - WLAN Information Report
GPS - The report for real time operation GPS
CID - The report for real time operation CID
CSQ - The report for real time operation CSQ
VER - The report for real time operation VER
PNA - Power on report
PFA - Power off report
EPN - The report for connecting external power supply
EPF - The report for disconnecting external power supply
BPL - Battery low report
BTC - Start charging report
STC - Stop charging report
STT - Device motion state indication
PDP - Mobile Data Service PDP connect report
SWG - Switch on or off Geo-Fence 0 via function key
GSM - The report for the information of the service cell and the neighbor cells.
GSI - G-sensor Information Report
inputN The current logical status of the input port number N:
0 - is disable status
1 - is enable status
power_percent The current volume of the backup battery %
iccid The ICCID of the SIM card
temp The temperature of the Device °C
lightness The lightness level
pwr_int The voltage of the battery V
csq_rssi The GSM signal strength level. The range is 0-31, 99 for unknown
csq_ber The quality of the GSM signal. The range is 0-7, 99 for unknown
dev_type The type of device
sw_ver The software version
hw_ver The hardware version
is_pwr_ext Whether the external power supply is connected.
0 - not connected
1 - connected
charging Whether the backup battery is charging when the main power supply is connected.
0 - not charging
1 - charging
led_on Indicate whether the LED’s are turned on
light_state The lightness state:
0: Report after the GPS fixing finished of timeout.
1: Lightness is greater than the bright threshold (Device from dark place to light place).
2: Lightness is less than the dark threshold (Device from light place to dark place).
mcc Mobile country code
mnc Mobile network code
lac Location area code
cell_id Cell ID
pwr_ext_flg Whether the external power supply is connected:
0 - Not connected
1 - Connected
gps_on_need GPS on need
gps_antenna_type GPS antenna type
rep_id

Report id

geo_mode

Geo mode

geo_radius

Geo radius

geo_check_int

Geo check int

ble_mac_#

Ble MAC address

hum

Humidity

gps_antenna_state

GPS antenna state

wifi_mac_#

WiFi MAC

wifi_rssi_#

WiFi RSSI

gps_fix_delay

GPS fix delay

mask_report

mask_report

mask_fri

Mask FRI packet

geo_active

Geo active

fix_type

FIX type

fota_upd_stat

Fota update status

mod_ver

Module version

ble_num

Ble number of sensors

ble_uuid_#

Ble uuid

ble_major_#

Ble major

ble_minor_#

Ble minor

ble_rssi_#

Ble rssi

ble_raw_#

Ble raw data

Otros dispositivos del fabricante

Contacte con Gurtam y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono