Prime AT NG

Prime AT NG
Fabricant: Micron
Forum de discussion

Nombre des unités

1
En ligne
9
Nombre total
Caractéristiques Prime AT NG:
  • Boîte à mémoire
  • Wi-Fi positioning

Afin d'identifier le boîtier Prime AT NG les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS: Prime AT NG
ID unique: imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Prime AT NG pour les utiliser dans Wialon Hosting :

Port du serveur: 22187

9 unités Prime AT NG connectées au le centre de données Wialon — Ça fait 0.03% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
gps_acc GPS accuracy
battery The current volume of the backup battery %
rep_type Type of report:
Type of the report:
FRI - Fixed Report Information
GEO - Geo-Fence Information
SPD - Speed Alarm
SOS - SOS report
RTO - Real Time Operation
PNL - The first location after the device powers on
NMR - Non movement is detected by motion sensor
DIS - The status of digital input is detected being changed
HIS - History report
INF - Device Information Report
WIF - WLAN Information Report
GPS - The report for real time operation GPS
CID - The report for real time operation CID
CSQ - The report for real time operation CSQ
VER - The report for real time operation VER
PNA - Power on report
PFA - Power off report
EPN - The report for connecting external power supply
EPF - The report for disconnecting external power supply
BPL - Battery low report
BTC - Start charging report
STC - Stop charging report
STT - Device motion state indication
PDP - Mobile Data Service PDP connect report
SWG - Switch on or off Geo-Fence 0 via function key
GSM - The report for the information of the service cell and the neighbor cells.
GSI - G-sensor Information Report
inputN The current logical status of the input port number N:
0 - is disable status
1 - is enable status
power_percent The current volume of the backup battery %
iccid The ICCID of the SIM card
temp The temperature of the Device °C
lightness The lightness level
pwr_int The voltage of the battery V
csq_rssi The GSM signal strength level. The range is 0-31, 99 for unknown
csq_ber The quality of the GSM signal. The range is 0-7, 99 for unknown
dev_type The type of device
sw_ver The software version
hw_ver The hardware version
is_pwr_ext Whether the external power supply is connected.
0 - not connected
1 - connected
charging Whether the backup battery is charging when the main power supply is connected.
0 - not charging
1 - charging
led_on Indicate whether the LED’s are turned on
light_state The lightness state:
0: Report after the GPS fixing finished of timeout.
1: Lightness is greater than the bright threshold (Device from dark place to light place).
2: Lightness is less than the dark threshold (Device from light place to dark place).
mcc Mobile country code
mnc Mobile network code
lac Location area code
cell_id Cell ID
pwr_ext_flg Whether the external power supply is connected:
0 - Not connected
1 - Connected
gps_on_need GPS on need
gps_antenna_type GPS antenna type
rep_id

Report id

geo_mode

Geo mode

geo_radius

Geo radius

geo_check_int

Geo check int

ble_mac_#

Ble MAC address

hum

Humidity

gps_antenna_state

GPS antenna state

wifi_mac_#

WiFi MAC

wifi_rssi_#

WiFi RSSI

gps_fix_delay

GPS fix delay

mask_report

mask_report

mask_fri

Mask FRI packet

geo_active

Geo active

fix_type

FIX type

fota_upd_stat

Fota update status

mod_ver

Module version

ble_num

Ble number of sensors

ble_uuid_#

Ble uuid

ble_major_#

Ble major

ble_minor_#

Ble minor

ble_rssi_#

Ble rssi

ble_raw_#

Ble raw data

Plus de boîtiers GPS de ce fabricant

Contactez Gurtam et atteignez les objectifs les plus ambitieux en télématique

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1
Étape 2
Étape 3
Prénom et nom *
Entreprise*
Email*
Téléphone