Localizador GPS Queclink GL300M | Integrado con Wialon

Características Queclink GL300M:

Caja negra

Puede ser apoyada por la petición:

Gestión remota vía GPRS
Gestión remota vía SMS
Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de Queclink GL300M en el diálogo de configuración de la unidad, indique los siguientes datos:

Tipo de dispositivo:	Queclink GL300M
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Queclink GL300M para utilizarlos en Wialon Hosting:

Puerto del servidor:

21845

En el centro de servicio Wialon se utilizan 17182 unidades Queclink GL300M — es 1% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
report	RESP BUFF ACK
buffer	0 - not buffered message 1 - buffered message	{0,1}
msg_type_name	Name of message type
report_name	GTXXX where XXX is name of message type
proto_ver	Protocol Version
name	Device Name
report_id	Report ID. For GEO: it indicates the ID of the Geo-Fence. For FRI: it indicates the <Append Mask>. For SOS: 0: Triggered through other ways. 1: Triggered by input ID 1. For HBM: “3” indicates high speed, “2” indicates medium speed “1” indicates low speed.
report_type	Report Type. For FRI 0: This message is a common scheduled position report. 1: This message is a turning point. For GEO 0: Exit the corresponding Geo-fence. 1: Enter the corresponding Geo-fence. For SPD 0: Outside the speed range. 1: Inside the speed range. For NMR 0: The state of the device changes from motion to rest. 1: The state of the device changes from rest to motion. For DIS 0: The current logic status of the input port is low level. 1: The current logic status of the input port is high level. For IGL 0: The engine is ignition on. 1: The engine is ignition off. For DOG 0: Reboot periodically according to the <Interval> and <Time> settings or upon ignitionon or by <Input ID> 1: PDP is unable to register successfully or the interaction of messages fails 2: No WCDMA signal For HBM 0: Harsh braking behavior 1: Harsh acceleration behavior
mileage	Mileage
battery	Battery Percentage	0 - 100
temp	Temperature

Nombre del parámetro

Descripción

Unidades de medida

report

RESP
BUFF
ACK

buffer

0 - not buffered message
1 - buffered message

{0,1}

msg_type_name

Name of message type

report_name

GTXXX where XXX is name of message type

proto_ver

Protocol Version

name

Device Name

report_id

Report ID.
For GEO:
it indicates the ID of the Geo-Fence.
For FRI:
it indicates the <Append Mask>.
For SOS:
0: Triggered through other ways.
1: Triggered by input ID 1.
For HBM:
“3” indicates high speed,
“2” indicates medium speed
“1” indicates low speed.

report_type

Report Type.
For FRI
0: This message is a common scheduled position report.
1: This message is a turning point.
For GEO
0: Exit the corresponding Geo-fence.
1: Enter the corresponding Geo-fence.
For SPD
0: Outside the speed range.
1: Inside the speed range.
For NMR
0: The state of the device changes from motion to rest.
1: The state of the device changes from rest to motion.
For DIS
0: The current logic status of the input port is low level.
1: The current logic status of the input port is high level.
For IGL
0: The engine is ignition on.
1: The engine is ignition off.
For DOG
0: Reboot periodically according to the <Interval> and <Time> settings or upon ignitionon or by <Input ID>
1: PDP is unable to register successfully or the interaction of messages fails
2: No WCDMA signal
For HBM
0: Harsh braking behavior
1: Harsh acceleration behavior

mileage

Mileage

battery

Battery Percentage

0 - 100

temp

Temperature

Por favor, llene la solicitud para iniciar el trabajo con Wialon