CARVIS MD-314SD

CARVIS MD-314SD
Fabricant: CARVIS
Forum de discussion

Nombre des unités

5
En ligne
164
Nombre total
Caractéristiques CARVIS MD-314SD:
  • 3G
  • Boîte à mémoire
  • Compatibilité avec GLONASS
Compatible avec Wialon:
  • Event video
  • Live stream
  • Manual video saving
  • Playback

Afin d'identifier le boîtier CARVIS MD-314SD les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS: CARVIS MD-314SD
ID unique: custom

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration CARVIS MD-314SD pour les utiliser dans Wialon Hosting :

Port du serveur: 22189

164 unités CARVIS MD-314SD connectées au le centre de données Wialon — Ça fait 1% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
param_id_#

Parameter value

event_#

Event

alarm_flag

Alarm flag (Bits1-32):

Bit1: 1: Emergency alarm, trigger after triggering alarm switch

Bit2: 1: Over speed alarm

Bit3: 1: Driving alarm malfunction

Bit4: 1: Risk warning

Bit5: 1: GNSS module malfunction

Bit6: 1: GNSS antenna was notconnected or cut

Bit7: 1: GNSS antenna short circuited

Bit8: 1: The terminal main power undervoltage

Bit9: 1: The terminal main power is turned off

Bit10: 1: Terminal LCD or displaymalfunction

Bit11: 1: TTS module malfunction

Bit12: 1: Camera malfunction

Bit13: 1: Road transportcertificate IC card module malfunction

Bit14: 1: Over speed warning

Bit15: 1: Fatigue driving warning

Bit16-Bit18: Reserve

Bit19: 1: The accumulated overspeed driving time of the day

Bit20: 1: Timeout parking

Bit21: 1: Enter and exit the area

Bit22: 1: Enter and exit the route

Bit23: 1: The driving time of theroute is not enough/too long

Bit24: 1: Off track alarm

Bit25: 1: Vehicle VSS malfunction

Bit26: 1: Abnormal fuel capacityof vehicle

Bit27: 1: The vehicle is stolen(through vehicle burglar alarm)

Bit28: 1: Illegal ignition of vehicle

Bit29: 1: Illegal displacement ofvehicle

Bit30: 1: Collision warning

Bit31: 1: Rollover warning

Bit32: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)

state_flag

Status (Bits 1-32):

Bit1: 0: ACC off; 1: ACC on

Bit2: 0: Not positioning; 1: Positioning

Bit3: 0: North latitude; 1: South latitude

Bit4: 0: East longitude; 1: West longitude

Bit5: 0: Running status; 1: Stop running status

Bit6: 0: Latitude and longitude are not encrypted by secret plug-ins; 1:

Latitude and longitude are encrypted by secret plug-ins

Bit7-Bit8: Reserve

Bit9-Bit10: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load

(It can be used for empty/heavy passenger car and empty/full load

status of the truck, manual input or sensor acquisition)

Bit11: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect

Bit12: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect

Bit13: 0: Vehicle door unlocked; 1: Vehicle door locked

Bit14: 0: Door 1 close; 1: Door 1 open (front door)

Bit15: 0: Door 2 close; 1: Door 2 open (middle door)

Bit16: 0: Door 3 close; 1: Door 3 open (back door)

Bit17: 0: Door 4 close; 1: Door 4 open (door of driver’s seat)

Bit18: 0: Door 5 close; 1: Door 5 open (user-defined)

Bit19: 0: No GPS positioning; 1: GPS positioning

Bit20: 0: No Beidou positioning; 1: Beidou positioning

Bit21: 0: No GLONASS positioning; 1: GLONASS positioning

Bit22: 0: No Galileo positioning; 1: Galileo positioning

Bit23-32: Reserve

odometer

Odometer

fuel_volume

Fuel volume

speed_drvng_rec

Speed driving rec

alarm_event_id

Alarm event ID

overspeed_alarm

Overspeed alarm

position_type

Position type

section_id

Section ID

route_alarm

Route alarm

direction

Direction

driving_time_alarm

Driving time alarm

driving_time

Driving time

driving_results

Driving results

video_alarm

Video related alarm

Bit 1 Video signal loss alarm

Bit 2 Video signal occlusion alarm

Bit 3 Storage unit failure alarm

Bit 4 Other video equipment failure alarm

Bit 5 Over passengers alarm

Bit 6 Abnormal driving behavior alarm

Bit 7 Special alarm recording reaches the storage threshold alarm

Bit 8-32 Reserved


video_signal_loss_alarm

Video signal loss alarm status (Bits 1-32),

bit1-bit32 respectively indicate the 1~32 logical channels, and the corresponding bit is 1 means the video channel is lost.

video_signal_block_alarm

The video signal blocks the alarm state (Bits 1-32)

bit1-bit32 respectively indicate the 1~32 logical channels, and the corresponding bit is 1 indicates that the video channel is blocked by the video channel.

memory_fault_alarm

Memory fault alarm status (Bits 1-16),

bit1-bit12 respectively indicate the 1~12 main memory,

bit13-bit16 respectively indicate the 1~4 disaster recovery storage devices,

and the corresponding bit is 1 means the memory is faulty.

abnormal_driving_alarm

Abnormal driving alarm (Bits 1-16)

Bit1:fatigue;

Bit2:call;

Bit3:smoking;

veh_signal_status

Veh. signal status

user_msg

User mesage

veh_stat

Vehicle status, the same as state_flag

info_id

Additional information ID

  1. 0x64 - driving assist warning information
  2. 0x65 - driver behavior monitoring function warning information
  3. 0x70 - violent driving warning information
  4. 0x14 - Video-related alarm
  5. 0x15 - Video signal loss alarm
  6. 0x16 - Video signal blockage alarm
  7. 0x17 - Memory fault alarm
  8. 0x18 -Driving behavior alarm
alm_time

Alarm time threshold

sec
alm_thre1

Warning threshold 1

When alm_type is 0x01~0x03, this bit is warning gravity acceleration threshold in 1/100g; when alm_type is 0x04~0x07, this bit is warning speed threshold in km/h.

alm_thre2

Warning threshold 2

This bit is reserved when alm_type is 0x01~0x03; when alm_type is 0x04~0x07, this bit is warning engine speed threshold in RPM.

workstate

Workstate,

0x01: normal work

0x02: standby mode

0x03: Upgrade maintenance

0x04: Device is abnormal

0x10: Disconnect

alarm_status

Alarm status, bits(1-32)

Bitwise setting: 0 means no, 1 means yes

bit1: cameraabnormal

bit2: Main memory exception

bit3: Auxiliary memory exception

bit4: Infrared fill light is abnormal

bit5: abnormal speaker

bit6: Abnormal battery

bit7~bit10:reserved

bit11: Communication module error

bit12: The positioning module is abnormal

bit13~bit32:reserved

alm_lvl

Warning level:

  • 0x01: Level 1 warning
  • 0x02: Level 2 warning
alm_id

According to the warning sequence, starting from 0 and accumulates circularly, without distinguishing warning types.

sign_stat

Sign status.

  • 0x00: Not available
  • 0x01: Start sign
  • 0x02: End sign

This field is only applicable to warnings or events with start and end sign types.

veh_ah_spd

Leading vehicle speed. Range: 0~250, valid only when warning types are 0x01 and 0x02, and fill in 0x00 when not available.

km/h
veh_ah_dst

Leading car/pedestrian distance

dev_type Deviation type:
  1. 0x01: Left deviation
  2. 0x02: Right deviation
  3. Only valid when warning type is 0x02, fill in 0x00 when unavailable.
road_sign_t

Road sign type

  • 0x01: Speed limit sign
  • 0x02: Height limit sign
  • 0x03: Weight limit sign
  • Only valid when warning types are 0x06 and 0x10; fill in 0x00 when not available.
road_sign_d

Road sign data. Data identified on road signs, fill in 0x00 when unavailable.

fat_deg Fatigue degree. Range 1~10. The larger the value, the more severe the fatigue. Only valid when warning type is 0x01, fill in 0x00 when unavailable.

Plus de boîtiers GPS de ce fabricant

Contactez Gurtam et atteignez les objectifs les plus ambitieux en télématique

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1
Étape 2
Étape 3
Prénom et nom *
Entreprise*
Email*
Téléphone