CARVIS MD-314SD

CARVIS MD-314SD
Fabricante: CARVIS
Discusión en el foro

Cantidad de unidades

8
En línea
80
Total
Características CARVIS MD-314SD:
  • 3G
  • Caja negra
  • Soporta GLONASS
Soportado en Wialon:
  • Guardado de vídeos de eventos
  • Transmisión en directo
  • Guardado manual de vídeos
  • Reproducción de grabaciones

Para que el sistema de rastreo Wialon identifique los datos de CARVIS MD-314SD en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: CARVIS MD-314SD
ID único: custom

Indique los siguientes parámetros en el programa de configuración o en la configuración CARVIS MD-314SD para utilizarlos en Wialon Hosting :

Puerto del servidor: 22189

En el centro de servicio Wialon se utilizan 80 unidades CARVIS MD-314SD — es 0.65% de la cantidad total de dispositivos Video monitoring conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
param_id_#

Parameter value

event_#

Event

alarm_flag

Alarm flag (Bits1-32):

Bit1: 1: Emergency alarm, trigger after triggering alarm switch

Bit2: 1: Over speed alarm

Bit3: 1: Driving alarm malfunction

Bit4: 1: Risk warning

Bit5: 1: GNSS module malfunction

Bit6: 1: GNSS antenna was notconnected or cut

Bit7: 1: GNSS antenna short circuited

Bit8: 1: The terminal main power undervoltage

Bit9: 1: The terminal main power is turned off

Bit10: 1: Terminal LCD or displaymalfunction

Bit11: 1: TTS module malfunction

Bit12: 1: Camera malfunction

Bit13: 1: Road transportcertificate IC card module malfunction

Bit14: 1: Over speed warning

Bit15: 1: Fatigue driving warning

Bit16-Bit18: Reserve

Bit19: 1: The accumulated overspeed driving time of the day

Bit20: 1: Timeout parking

Bit21: 1: Enter and exit the area

Bit22: 1: Enter and exit the route

Bit23: 1: The driving time of theroute is not enough/too long

Bit24: 1: Off track alarm

Bit25: 1: Vehicle VSS malfunction

Bit26: 1: Abnormal fuel capacityof vehicle

Bit27: 1: The vehicle is stolen(through vehicle burglar alarm)

Bit28: 1: Illegal ignition of vehicle

Bit29: 1: Illegal displacement ofvehicle

Bit30: 1: Collision warning

Bit31: 1: Rollover warning

Bit32: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)

state_flag

Status (Bits 1-32):

Bit1: 0: ACC off; 1: ACC on

Bit2: 0: Not positioning; 1: Positioning

Bit3: 0: North latitude; 1: South latitude

Bit4: 0: East longitude; 1: West longitude

Bit5: 0: Running status; 1: Stop running status

Bit6: 0: Latitude and longitude are not encrypted by secret plug-ins; 1:

Latitude and longitude are encrypted by secret plug-ins

Bit7-Bit8: Reserve

Bit9-Bit10: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load

(It can be used for empty/heavy passenger car and empty/full load

status of the truck, manual input or sensor acquisition)

Bit11: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect

Bit12: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect

Bit13: 0: Vehicle door unlocked; 1: Vehicle door locked

Bit14: 0: Door 1 close; 1: Door 1 open (front door)

Bit15: 0: Door 2 close; 1: Door 2 open (middle door)

Bit16: 0: Door 3 close; 1: Door 3 open (back door)

Bit17: 0: Door 4 close; 1: Door 4 open (door of driver’s seat)

Bit18: 0: Door 5 close; 1: Door 5 open (user-defined)

Bit19: 0: No GPS positioning; 1: GPS positioning

Bit20: 0: No Beidou positioning; 1: Beidou positioning

Bit21: 0: No GLONASS positioning; 1: GLONASS positioning

Bit22: 0: No Galileo positioning; 1: Galileo positioning

Bit23-32: Reserve

odometer

Odometer

fuel_volume

Fuel volume

speed_drvng_rec

Speed driving rec

alarm_event_id

Alarm event ID

overspeed_alarm

Overspeed alarm

position_type

Position type

section_id

Section ID

route_alarm

Route alarm

direction

Direction

driving_time_alarm

Driving time alarm

driving_time

Driving time

driving_results

Driving results

video_alarm

Video related alarm

Bit 1 Video signal loss alarm

Bit 2 Video signal occlusion alarm

Bit 3 Storage unit failure alarm

Bit 4 Other video equipment failure alarm

Bit 5 Over passengers alarm

Bit 6 Abnormal driving behavior alarm

Bit 7 Special alarm recording reaches the storage threshold alarm

Bit 8-32 Reserved


video_signal_loss_alarm

Video signal loss alarm status (Bits 1-32),

bit1-bit32 respectively indicate the 1~32 logical channels, and the corresponding bit is 1 means the video channel is lost.

video_signal_block_alarm

The video signal blocks the alarm state (Bits 1-32)

bit1-bit32 respectively indicate the 1~32 logical channels, and the corresponding bit is 1 indicates that the video channel is blocked by the video channel.

memory_fault_alarm

Memory fault alarm status (Bits 1-16),

bit1-bit12 respectively indicate the 1~12 main memory,

bit13-bit16 respectively indicate the 1~4 disaster recovery storage devices,

and the corresponding bit is 1 means the memory is faulty.

abnormal_driving_alarm

Abnormal driving alarm (Bits 1-16)

Bit1:fatigue;

Bit2:call;

Bit3:smoking;

veh_signal_status

Veh. signal status

user_msg

User mesage

veh_stat

Vehicle status, the same as state_flag

info_id

Additional information ID

  1. 0x64 - driving assist warning information
  2. 0x65 - driver behavior monitoring function warning information
  3. 0x70 - violent driving warning information
  4. 0x14 - Video-related alarm
  5. 0x15 - Video signal loss alarm
  6. 0x16 - Video signal blockage alarm
  7. 0x17 - Memory fault alarm
  8. 0x18 -Driving behavior alarm
alm_time

Alarm time threshold

sec
alm_thre1

Warning threshold 1

When alm_type is 0x01~0x03, this bit is warning gravity acceleration threshold in 1/100g; when alm_type is 0x04~0x07, this bit is warning speed threshold in km/h.

alm_thre2

Warning threshold 2

This bit is reserved when alm_type is 0x01~0x03; when alm_type is 0x04~0x07, this bit is warning engine speed threshold in RPM.

workstate

Workstate,

0x01: normal work

0x02: standby mode

0x03: Upgrade maintenance

0x04: Device is abnormal

0x10: Disconnect

alarm_status

Alarm status, bits(1-32)

Bitwise setting: 0 means no, 1 means yes

bit1: cameraabnormal

bit2: Main memory exception

bit3: Auxiliary memory exception

bit4: Infrared fill light is abnormal

bit5: abnormal speaker

bit6: Abnormal battery

bit7~bit10:reserved

bit11: Communication module error

bit12: The positioning module is abnormal

bit13~bit32:reserved

alm_lvl

Warning level:

  • 0x01: Level 1 warning
  • 0x02: Level 2 warning
alm_id

According to the warning sequence, starting from 0 and accumulates circularly, without distinguishing warning types.

sign_stat

Sign status.

  • 0x00: Not available
  • 0x01: Start sign
  • 0x02: End sign

This field is only applicable to warnings or events with start and end sign types.

veh_ah_spd

Leading vehicle speed. Range: 0~250, valid only when warning types are 0x01 and 0x02, and fill in 0x00 when not available.

km/h
veh_ah_dst

Leading car/pedestrian distance

dev_type Deviation type:
  1. 0x01: Left deviation
  2. 0x02: Right deviation
  3. Only valid when warning type is 0x02, fill in 0x00 when unavailable.
road_sign_t

Road sign type

  • 0x01: Speed limit sign
  • 0x02: Height limit sign
  • 0x03: Weight limit sign
  • Only valid when warning types are 0x06 and 0x10; fill in 0x00 when not available.
road_sign_d

Road sign data. Data identified on road signs, fill in 0x00 when unavailable.

fat_deg Fatigue degree. Range 1~10. The larger the value, the more severe the fatigue. Only valid when warning type is 0x01, fill in 0x00 when unavailable.

Otros dispositivos del fabricante

Contacte con Gurtam y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono