Xiamen Mobile DVR LZ8713

Xiamen Mobile DVR LZ8713
Fabricante: Xiamen Lenz
Discusión en el foro

Cantidad de unidades

1
En línea
8
Total
Características Xiamen Mobile DVR LZ8713:
  • 4G/LTE
  • Caja negra

Para que el sistema de rastreo Wialon identifique los datos de Xiamen Mobile DVR LZ8713 en el diálogo de configuración de la unidad, indique los siguientes datos:

Tipo de dispositivo: Xiamen Mobile DVR LZ8713
ID único: custom

Indique los siguientes parámetros en el programa de configuración o en la configuración Xiamen Mobile DVR LZ8713 para utilizarlos en Wialon Hosting:

Puerto del servidor: 22160

En el centro de servicio Wialon se utilizan 8 unidades Xiamen Mobile DVR LZ8713 — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
phone_number SIM card phone number
ip Dynamic IP of the terminal
signal_quality Current signal quality
driver_id Driver ID
route_no Route No
type_of_data

Type of data:

0x03-QS01 passenger flow statistics
0x07-QS01 passenger flow statistics (updated regularly)

prev_site_n Previous site number
dist_stations Distance between stations
gps_valid GPS valid marking:
0x41 valid
0x56 invalid
mileage Accumulated mileage km
alarm_state

Vehicle condition alarm state. The meaning of counting each digit from the end to the front
1: reserved
2: Overspeed: Overspeed is 1, normal is 0
3: Sudden braking: Sudden braking is 1, normal is 0
4: Stay overtime at any point: timeout is 1, normal is 0
5: User button alarm: alarm is 1, normal is 0
6: GPS antenna short circuit: alarm is 1, normal is 0
7: GPS antenna open circuit: alarm is 1, normal is 0
8: GPS signal alarm: no signal over time 1, normal 0
9: The driver dials the phone (the terminal will go offline at this time).
10: GPS information: valid as 1, invalid as 0
11: Operational status: 1 in operation, 0 in non-operational state
12: Up and down: Up line is 1, down line is 0
13: Stop: at 1 inside the station, 0 outside the station
14: Starting station: at 1 inside the station, 0 outside the station
15: Terminal: at 1 inside the station, 0 outside the station 1
16: Gas station: at 1 inside the station, 0 outside the station
17: Parking lot: 1 inside the station, 0 outside the station
18: Cash drawer open flag: open 1, not open 0
19: Door opening and closing signal to the station: 1 for abnormality, 0 for normal
20: Signal for opening and closing doors during driving: 1 for abnormal, 0 for normal
21: Cross-border alarm: alarm is 1, normal is 0
22: Positioning module type: Beidou is 1, GPS is 0
23: The input low level is 1, the default is 0
24: Supplementary transmission data flag: Supplementary transmission is 1, normal is 0
25: Positioning tracking flag: Positioning tracking is 1, normal is 0
26: Roll call mark: roll call is 1, normal is 0
27: The input high level is 1, the default is 0
28: The input high level is 1, the default is 0
29: Fatigue driving sign: Fatigue driving is 1, the default is 0
30: Battery alarm: low level alarm is 1, default 0
31: Vehicle power-off flag: the power-off state is 1, the default is 0
32: Camera flag: camera position 1, default is 0

pass_flow_m_id Passenger flow meter ID
num_people_on Number of people on the bus
num_people_off Number of people getting off
door_status Door status:
0x00-open the door
0x01-close the door
query_num_closed_door For query use only, query the number of closed doors
data_serial_num Data serial number, the passenger flow meter accumulates count, cleared to 0 after power failure
num_people_on_prev_stop Number of people boarding at the previous stop
num_people_off_prev_stop Number of people getting off at the previous stop
meter_fault The identification of the passenger flow meter failure when its value is 0x01

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono