Jointech JT701

Jointech JT701
Fabricante: Jointech
Rating del usuario

(16 Votos)

Discusión en el foro

Cantidad de unidades

212
En línea
1080
Total
Dynamic hosting units Jointech JT701
Soportado en Wialon:
  • Manejo remote via GPRS
  • Comunicación por TCP

Para que el sistema de rastreo Wialon identifique los datos de Jointech JT701 en el diálogo de configuración de la unidad, indique los siguientes datos:

Tipo de dispositivo: Jointech JT701
ID único: serial

Indique los siguientes parámetros en el programa de configuración o en la configuración Jointech JT701 para utilizarlos en Wialon Hosting:

Puerto del servidor: 21222

En el centro de servicio Wialon se utilizan 1080 unidades Jointech JT701 — es 9.28% de la cantidad total de dispositivos Rastreador de activos conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
event Event source type has the following event sources:
1:Swipe authorization card;
2:Swipe illegal card;
3:Swipe the vehicle ID cards bound;
4:password unlock;
5:record to lock automatically;
swipe_auth_card Swipe authorization card value
swipe_card_id Swipe illegal card value
swipe_veh_id_bound Swipe the vehicle ID cards bound value
pass_unlock Password unlock value
auto_lock Record to lock automatically value
mileage The current mileage, calculated under vibration status
gps_quantity Indicated the quantity of connected GPS, the figure will be 0 if the device is located by LBS.
vichle_id The Vehicle ID connected with this device.
device_status Device’s status or alarms. byte 1 at right side, byte3 at left side, the detail is as follows:
Byte1.BIT0 Whether located by LBS, 1 means located by LBS, 0 means located by GPS
Byte1.BIT1 Enter Geo-fence alarm, 1 means trigger this alarm, 0 means normal.
Byte1.BIT2 Exit Geo-fence alarm, 1 means trigger this alarm, 0 means normal.
Byte1.BIT3 Steel String cut alarm, 1 means trigger this alarm, 0 means normal.
Byte1.BIT4 Vibration alarm, 1 means trigger this alarm, 0 means normal.
Byte1.BIT5 need to be confirmed, 1 means need to be confirmed. 0 means no need to be confirmed.
Real time data,this BIT fixed 0;
Alarm data ,this BIT fixed 1;
Re-uploading data ,this BIT fixed 1;
Byte1.BIT6 Steel String status: 1 means strings inserted, 0 means disconnect
Byte1.BIT7 Motor Lock status: 1 means lock, 0 means unlock.

Byte2.BIT0 Unlocking alarm 1 means trigger this alarm, 0 means normal.
Byte2.BIT1 Wrong password alarm ( Input the incorrect password more than 5 times.) 1 means trigger this alarm, 0 means normal.
Byte2.BIT2 Swipe unauthorized RFID tag alarm 1 means trigger this alarm, 0 means normal.
Byte2.BIT3 Low battery alarm 1 means trigger this alarm, 0 means normal.
Byte2.BIT4 Open Back Cap alarm 1 means trigger this alarm, 0 means normal.
Byte2.BIT5 Back Cap status: 1 means back cap close status,0 means back cap opening
Byte2.BIT6 Motor fault alarm 1 means Motor fault alarm ,0 means normal.
Other BITS Reserved
battery Electric quantity, indicated by hexadecimal, 0x64 means the current battery is 100%, accuracy is 5%,if the value is 0xFF, means the USB is charging.
cell_id Cell ID
lac LAC
gsm Indicates the strength of GSM signal. The maximum value for GSM signal strength is 31.
serial_num Serial number, Sending one more data, increase1. Range: 0x00~0xFF.

Otros dispositivos del fabricante