Localizador GPS Topflytech Pioneerx 100

Características Topflytech Pioneerx 100:

2G
4G/LTE
Caja negra
BLE
Odómetro incorporado

Soportado en Wialon:

Acelerómetro
Sensores ADC
Gestión remota vía GPRS
Sensores Digitales
Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de Topflytech Pioneerx 100 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	Topflytech Pioneerx 100
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Topflytech Pioneerx 100 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22469

En el centro de servicio Wialon se utilizan 2075 unidades Topflytech Pioneerx 100 — es 0.09% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
sf_vers	Software version of the hardware
fw_vers	Firmware version of the hardware
platform	Platform version of the hardware
hw_vers	Hardware version
acc_on	Ignition ON Upload Interval	seconds
acc_off	Ignition OFF Upload Interval	seconds
angle	Angle Upload Interval	degrees
distance	Distance upload interval	m
gps_data	Bitwise variable, in which each bit means following: Bit7=0, realtime data; Bit7=1, history data Bit6=0, LBS data; Bit6=1, GNSS data Bit5=0, GNSS is in working mode. Bit5=1, GNSS is in sleeping mode Bit4~Bit0, locked satellite count
speed_alarm	Over speed alarm setting	km\h
gsensor	Bitwise variable in which each bit means following: Bit7~Bit4, total 16 different gsensor sensitivity for move. Bit3~Bit0, show 4 managers status (set or not) Value=1, manger is set; Value=0, manager is null
heartbeat_int	Sending interval of heartbeat package	minutes
relay	Relay status, which is bitwise variable Bit7 (command type received): 0: device received the engine recover command 1: device received the engine cut command Bit6 (engine cut execution status): 0: engine cut failed because gps not fix or speed more than 20 km\h 1: engine cut ok Bit 5 & Bit4 (rly mode): 00: rlymode = 0 10: rlymode = 1 01: rlymode = 2 11: rlymode = 3~255 Bit3~Bit 0 (buld in alarm SMS language): 0: Chinese 1: English 2: French 3: Spanish 4: German 5: Portuguese 6: Arabic 7: Indonesian 8: Russain 9: Turkish
drag_alarm	Bitwise variable, each byte means following: 1.Bit15~Bit0. The range is 0~65535 2. Value(Bit15~Bit0)=0, the drag alarm is disabled 3. Once the alarm is set and enabled, when device detected the ignition status changed from ON to OFF, the alarm will automatically become effective.

Nombre del parámetro

Descripción

Unidades de medida

sf_vers

Software version of the hardware

fw_vers

Firmware version of the hardware

platform

Platform version of the hardware

hw_vers

Hardware version

acc_on

Ignition ON Upload Interval

seconds

acc_off

Ignition OFF Upload Interval

seconds

angle

Angle Upload Interval

degrees

distance

Distance upload interval

gps_data

Bitwise variable, in which each bit means following:

Bit7=0, realtime data; Bit7=1, history data
Bit6=0, LBS data; Bit6=1, GNSS data
Bit5=0, GNSS is in working mode. Bit5=1, GNSS is in sleeping mode
Bit4~Bit0, locked satellite count

speed_alarm

Over speed alarm setting

km\h

gsensor

Bitwise variable in which each bit means following:

Bit7~Bit4, total 16 different gsensor sensitivity for move.
Bit3~Bit0, show 4 managers status (set or not)
Value=1, manger is set; Value=0, manager is null

heartbeat_int

Sending interval of heartbeat package

minutes

relay

Relay status, which is bitwise variable

Bit7 (command type received):
- 0: device received the engine recover command
- 1: device received the engine cut command

Bit6 (engine cut execution status):
- 0: engine cut failed because gps not fix or speed more than 20 km\h
- 1: engine cut ok
Bit 5 & Bit4 (rly mode):
- 00: rlymode = 0
- 10: rlymode = 1
- 01: rlymode = 2
- 11: rlymode = 3~255
Bit3~Bit 0 (buld in alarm SMS language):
- 0: Chinese
- 1: English
- 2: French
- 3: Spanish
- 4: German
- 5: Portuguese
- 6: Arabic
- 7: Indonesian
- 8: Russain
- 9: Turkish

drag_alarm

Bitwise variable, each byte means following:

1.Bit15~Bit0. The range is 0~65535
2. Value(Bit15~Bit0)=0, the drag alarm is disabled
3. Once the alarm is set and enabled, when device detected the ignition status changed from ON to OFF, the alarm will automatically become effective.

Por favor, llene la solicitud para iniciar el trabajo con Wialon