Huabao HB-A1L

Huabao HB-A1L
Forum de discussion

Nombre des unités

27
En ligne
91
Nombre total
Caractéristiques Huabao HB-A1L:
  • E-seal

Afin d'identifier le boîtier Huabao HB-A1L les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS: Huabao HB 1AL
ID unique: custom

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Huabao HB-A1L pour les utiliser dans Wialon Hosting :

Port du serveur: 22007

91 unités Huabao HB-A1L connectées au le centre de données Wialon — Ça fait 0.12% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
odometer Vehicle odometer km
fuel_volume Fuel capacity %
speed_drvng_rec The speed of driving record function km/h
alarm_event_id Alarm event id
overspeed_alarm Existance of overspeed alarm
position_type Overspeed/route alarm location type
0 - No specific location
1 - Circular region
2 - Rectangle region
3 - Polygon region
4 - Route
section_id Overspeed/route/driving time alarm section id
If the location type is 0, without this field
route_alarm Existance of route alarm
direction Direction of route alarm
0 - In
1 - Out
driving_time_alarm Existance of driving time alarm
driving_time Driving time s
driving_results Driving result
0 - Shortage
1 - Too long
veh_signal_status Extended vehicle signal status
0 - The near beam light signal
1 - The high beam light signal
2 - Right turn signal
3 - Left turn signal
4 - Brake signal
5 - Reverse signal
6 - Fog signal
7 - Profile light signal
8 - Horn signal
9 - Air conditioning state
10 - Neutral signal
11 - Retarder working state
12 - ABS working state
13 - Heater working state
14 - Clutch working state
15 - Reserved
adc_0 Analog quantity 1
adc_1 Analog quantity 2
adc_2 Analog quantity 3
adc_3 Analog quantity 4
gsm Wireless communication network signal strength
user_msg Custom message
sdeviceid_# Lock device # ID number
scardid_# RFID card # number
spower_# Lock # Battery percentage
sstatus_# Lock # status
0 - 0:seal tempered normal, 1:seal tempered error
1 - Lock rope status. 1 means lock rope is inserted. Otherwise,0
2 - The status of Slave and master bluetooth connection, 1 means slave disconnect from master, otherwise 0.
3 - Back cap status. 1 means closing status. Otherwise, 0.
4 - Back cap alarm. 1 means back cap open alarm. Otherwise, 0
5 - 1 means unlock alarm, otherwise, 0.
6 - Cut off rope alarm. 1 means lock rope cut alarm, otherwise, 0
7 - Lock motor stuck alarm. 1 mean motor is stuck. Otherwise, 0.
8 - Low battery alarm,1 means low power alarm. Otherwise, 0.
9 -
Swipe unauthorized card alarm (IllegalCard),1 means swiped unauthorized RFID card alarm. Otherwise, 0.
mes_id Terminal general response message id
result Terminal general response message result:
0 - Success / Confirmation;
1 - Failed;
2 - Message in error;
event_# Event report ID
ans_trigger Terminal transmission message trigger id
ans_cmd Terminal transmission message
state State flag:
0 - 0: ACC turn off 1: ACC turn on;
1 - 0: Without positioning 1: Positioning;
2 - 0: Northern latitude 1: Southern latitude;
3 - 0: East longitude 1: West longitude;
4 - 0: Operation state 1: Stop operation state;
5 -
0: Latitude and longitude without security card encryption, 1: Latitude and longitude have security card encryption;
6-7 - Reserved;
8-9 - 00: empty; 01: half, 10: retention; 11: full (can be used for bus air, car and truck load, which is usually crowded with a large number of state, said manual input or sensor get);
10 - 0: Vehicle fuel circuit normal 1: Vehicle fuel circuit abnormal;
11 - 0: Vehicle circuit normal 1: Vehicle circuit abnormal;
12 - 0: Door unlock 1: Door lock;
13 - 0: First door close 1: First door open;
14 - 0: Second door close 1: Second door open;
15 - 0: Third door close 1: Third door open;
16 - 0: Fourth door close 1: Fourth door open;
17 - 0: Fifth door close 1: Fifth door open;
18 - 0: Not using GPS satellite for positioning; 1: use GPS satellite positioning;
19 - 0: Not using Beidou satellite for positioning; 1: use Beidou satellite positioning;
20 - 0: Not using GLONASS satellite for positioning; 1: use GLONASS satellite positioning;
21 - 0: Not using Galileo satellite for positioning; 1: use Galileo satellite positioning;
22-31 - Reserved.

alarms Alarm flag:
0 - 1: SOS alarm, trigger alarm switch;
1 - 1: over-speed alarm;
2 - 1: fatigue driving;
3 - 1: pre-warning
4 - 1: GNSS module break down;
5 - 1:GNSS antenna unconnected or be cut off;
6 - 1: GNSS antenna short circuit;
7 - 1: Power Supply power under voltage;
8 - 1: Cut Off Power Supply;
9 - 1: Terminal LCD or display break down;
10 - 1: TTS module break down;
11 - 1: camera module break down;
12-17 - Reserved;
18 - 1: The accumulative total driving timeout;
19 - 1: parking timeout;
20 - 1: exit and entrance region;
21 - 1: exit and entrance route;
22 - 1: driving time shortage/ too long;
23 - 1: Route deviation alarm;
24 - 1: Vehicle VSS fault;
25 - 1: Vehicle fuel anomaly;
26 - 1: Vehicle anti-theft(by vehicle anti-theft device);
27 - 1: Vehicle illegal ignition;
28 - 1: Vehicle illegal displacement;
29 - 1: Collision alarm;
30-31 - Reserved.

device_status

Device status (Bits 1-16)

1: Whether located by LBS, 1 means located by LBS, 0 means not LBS

2: Enter Geo-fence alarm,(InFenceAlarm), 1 means trigger this alarm, 0 means norm

3: Exit Geo-fence alarm,(OutFenceAlarm), 1 means trigger this alarm, 0 means norm

4: Steel String cut alarm,(LockCutOff), 1 means trigger this alarm, 0 means norm

5: Vibration alarm,(Vibration, SealTempered), 1 means trigger this alarm, 0 means norm

6: need to be confirmed, 1 means need to be confirmed. 0 means no need to be confirmed.(MessageAck)

7: Steel String status:(LockRope), 1 means rope inserted, 0 means not inserted

8: Motor Lock status:(LockStatus), 1 means lock, 0 means unlock.

9: Unlocking alarm(LockOpen), 1 means trigger this alarm, 0 means norm

10: Wrong password alarm ( Input the incorrect password more than 5 times.) (PasswordError), 1 means trigger this alarm, 0 means norm

11: Swipe unauthorized RFID tag alarm (IllegalCard), 1 means trigger this alarm, 0 means norm

12: Low battery alarm(LowPower), 1 means trigger this alarm, 0 means norm

13: Open Back cover alarm(UnCoverBack), 1 means trigger this alarm, 0 means norm

14: Back Cap status:(CoverStatus), 1 means back cap close status,0 means back cap opening

15: Motor fault alarm/lock stuck status(LockStuck), 1 means Motor fault alarm, 0 means norm

16: Electric quantity, indicated by hexadecimal, 0x64 means the current battery is 100. (Power)

Plus de boîtiers GPS de ce fabricant

Contactez Gurtam et atteignez les objectifs les plus ambitieux en télématique

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1
Étape 2
Étape 3
Prénom et nom *
Entreprise*
Email*
Téléphone