GPS трекер для мониторинга имущества Seeworld W18l

Особенности Seeworld W18l:

4G/LTE
Wi-Fi позиционирование

Поддержано в Wialon:

Управляющие команды по GPRS
LBS
Связь через TCP

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Seeworld W18l в диалоге настроек объекта, укажите следующие данные :

Тип устройства:	Seeworld W18l
Уникальный ID:	custom

Укажите следующие параметры в конфигурационной программе или в конфигурации Seeworld W18l для использования его в Wialon Hosting :

Порт сервера:

22615

Всего в серверном центре Wialon используется 56 объектов Seeworld W18l — это составляет 0.03% от общего количества устройств в категории «Стационарные устройства».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
volt_lvl	The arrange is 0~6 defining the voltage is from low to high. 0: No Power (shutdown) 1: Extremely Low Battery (not enough for calling or sending text messages, etc.) 2: Very Low Battery (Low Battery Alarm) 3: Low Battery (can be used normally) 4: Medium 5: High 6: Very High
gsm	GSM signal strength degree
pwr_ext	External voltage	V
lang	Language. ch: Chinese en: English
term_info	1 byte that represents the status information of the terminal. One byte is regarded as 8 bits, the lowest bit is 0 bits, and the highest bit is 7 bits. Bit 7 1: Oil and electricity disconnected 0: Oil and electricity connected Bit 6 1: GPS has positioned 0: GPS not positioned Bit 5- Bit 3 111: Door open alarm 110: Door closing alarm 100: SOS alarm 011: Low battery alarm 010: Power failure alarm 001: Vibration alarm 000: normal Bit 2 1: Connected to external power supply 0: No external power supply connected Bit 1 1: ACC ON 0: ACC OFF Bit 0 1: Fortification 0: Disarm
travel_time	Total travel time in seconds	sec
temp	Temperature	Celsius
humidity	Humidity	%RH
data_mode	Data reporting mode. 0x00: Regular reporting 0x01: Fixed interval reporting 0x02: Inflection point upload 0x03: ACC status change upload 0x04: After changing from motion to static state, the last positioning point is transmitted. 0x05: After the network is disconnected and reconnected, the last valid upload point before reporting 0x06: Reporting mode: Mandatory upload of GPS points for ephemeris update 0x07: Reporting mode: press the button to upload the anchor point 0x08: Reporting mode: report location information after power on 0x09: Reporting mode: not used 0x0A : Reporting mode: the device reports the last longitude and latitude after being stationary, but the time is updated 0x0B : WIFI parsing longitude and latitude upload package 0x0C : Reporting mode: LJDW (immediate positioning) command reporting 0x0D : Reporting mode: report the last longitude and latitude after the device is stationary 0x0E : Reporting mode: GPSDUP upload (scheduled upload in static state)

Имя параметра

Описание

Единицы измерения

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Cell Tower ID

volt_lvl

The arrange is 0~6 defining the voltage is from low to high.

0: No Power (shutdown)

1: Extremely Low Battery (not enough for calling or sending text messages, etc.)

2: Very Low Battery (Low Battery Alarm)

3: Low Battery (can be used normally)

4: Medium

5: High

6: Very High

gsm

GSM signal strength degree

pwr_ext

External voltage

lang

Language.

ch: Chinese

en: English

term_info

1 byte that represents the status information of the terminal. One byte is regarded as 8 bits, the lowest bit is 0 bits, and the highest bit is 7 bits.

Bit 7

1: Oil and electricity disconnected
0: Oil and electricity connected

Bit 6

1: GPS has positioned
0: GPS not positioned

Bit 5- Bit 3

111: Door open alarm
110: Door closing alarm
100: SOS alarm
011: Low battery alarm
010: Power failure alarm
001: Vibration alarm
000: normal

Bit 2

1: Connected to external power supply
0: No external power supply connected

Bit 1

1: ACC ON
0: ACC OFF

Bit 0

1: Fortification
0: Disarm

travel_time

Total travel time in seconds

sec

temp

Temperature

Celsius

humidity

Humidity

%RH

data_mode

Data reporting mode.

0x00: Regular reporting
0x01: Fixed interval reporting
0x02: Inflection point upload
0x03: ACC status change upload
0x04: After changing from motion to static state, the last positioning point is transmitted.
0x05: After the network is disconnected and reconnected, the last valid upload point before reporting
0x06: Reporting mode: Mandatory upload of GPS points for ephemeris update
0x07: Reporting mode: press the button to upload the anchor point
0x08: Reporting mode: report location information after power on
0x09: Reporting mode: not used
0x0A : Reporting mode: the device reports the last longitude and latitude after being stationary, but the time is updated
0x0B : WIFI parsing longitude and latitude upload package
0x0C : Reporting mode: LJDW (immediate positioning) command reporting
0x0D : Reporting mode: report the last longitude and latitude after the device is stationary
0x0E : Reporting mode: GPSDUP upload (scheduled upload in static state)

Заполните заявку для начала работы с Wialon

Продукты

Нишевые продукты для решения точечных задач

Seeworld W18l

Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Станьте партнером

Закажите Wialon в вашем регионе

Заполните заявку для начала работы с Wialon