Autocop TL-2000

Autocop TL-2000
Manufacturer: Autocop Trackpro
User rating

(3 Votes)

Forum Discussion

Number of units

Features Autocop TL-2000:
  • Blackbox
Supported in Wialon:
  • Digital sensors
  • Communication via TCP
  • Driver identification
  • ADC sensors

The following data should also be added to Autocop TL-2000 unit properties section of Wialon GPS tracking software:

Device type: Autocop TL-2000
Unique ID: imei

Specify the following parameters in configuration software or configuration Autocop TL-2000 for use in Wialon Hosting:

Server IP Address:
Server port: 20903

1 units of Autocop TL-2000 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
device_model Model number of TP model
pcb_ver Version number of PCB (Alpha numeric)
iccid Integrated Circuit Card Id
firmware_ver Version number firmware. 4 digit alpha numeric number
firmware_ver_ext Version number firmware extended. 4 digit alpha numeric number
gsm Strength of GSM signal
pwr_ext External battery voltage V
pwr_int Internal battery voltage V
temp_int Temperature of PCB °C
temp_ext External temperature sensor data °C
moving_status Moving Status
accel_g Instantaneous (combination of x-y-z)
accel_cornering Accel cornering value
trip Continuous virtual distance:
1 - start
2 - end
0 - not used
odometer GPS distance m
over_speed_status Trackpro will send 1 in case of over speeding and 0 if it is in a specified speed limit
ac_alert Trackpro can track AC is switched on when ignition is off
immobiliser_status Immobiliser status
temp_ext_alert External temperature alert
eco_driving_alert Eco driving alert:
1 - harsh
2 - acceleration
3 - harsh braking
0 - NULL
model_reconn_alert Trackpro model reconnect alert
pwr_int_alert Low internal battery voltage alert
pwr_ext_alert External battery removal alert
gps_error_alert GPS error alert
tow_away_alert Towed away alert
mode Mode:
2 - sleep
0 - deep sleep
1 - active
sms_count SMS count