| status_cmd_[CMD ID] |
Status of the command if it was successful.
CMD ID — id of the parameter that was sent via command platform_cmd
|
|
| odometer |
Odometer of the vehicle
|
|
| mileage |
Total mileage of the vehicle
|
km |
| fuel_volume |
Fuel tank capacity
|
m^3 |
| tank_oil_volume |
Tank oil volume
|
m^3 |
| load_sens_id_[NUM] |
ID of the load [NUM] sensor, up to 4 groups of load sensors
|
|
| ad_blue_[NUM] |
AD Blue value of the [NUM] sensor, corresponding to load_sens_id. Up to 4 groups of sensors
|
|
| wifi_mac_[NUM] |
Wi-fi MAC address of the [NUM] point. When the satellite positioning is
invalid, the terminalactively uploads the current WIFI DATA to the
platform for auxiliary positioning. The WIFI_MAC information does not
exceed 10 groups
|
|
| wifi_rssi_[NUM] |
WiFi signal strength of the [NUM] point. When the satellite positioning
is invalid, the terminalactively uploads the current WIFI DATA to the
platform for auxiliary positioning. The WIFI_RSSI information does not
exceed 10 groups
|
|
| ble_mac_[NUM] |
BLE MAC address of the [NUM] point. When the satellite positioning is
invalid, the terminalactively uploads the current BLE DATA to the
platform for auxiliary positioning. The BLE_MAC information does not
exceed 10 groups
|
|
| ble_rssi_[NUM] |
BLE signal strength of the [NUM] point. When the satellite positioning
is invalid, the terminalactively uploads the current BLE DATA to the
platform for auxiliary positioning. The BLE_RSSI information does not
exceed 10 groups
|
|
| event_id |
ID of the Event
|
|
| event_type |
Event Type: - 0x00 — Normal event
- 0x01 — Alarm Event
|
|
| slave_id_[NUM] |
Lora save lock slave ID of [NUM] lock
|
|
| slave_battery_[NUM] |
Battery percentage of the [NUM] LORA lock
|
|
| slave_sealed_[NUM] |
Seal status of the [NUM] LORA lock. - 0X30 — Unseal
- 0x31 — Seal
|
|
| slave_phys_state_[NUM] |
Physical state of the [NUM] LORA lock - 0X31 — Bound
- 0x32 — Shackle closed
- 0x33 — Shackle opened
- 0x34 — Shell opened
- 0x35 — Communication timeout
- 0x36 - Shacle/Wire rope is cut;
|
|
| slave_rssi_[NUM] |
Wireless strength of [NUM] LORA lock signal
|
|
| temp_hum_sens_id_[NUM] |
Lora temperature and humidity sensor ID of [NUM] sensor
|
|
| lora_pwr_int_[NUM] |
Internal voltage of the [NUM] LORA sensor.
|
V |
| lora_real_tm_temp_[NUM] |
Real time temperature of the [NUM] LORA sensor
|
°C |
| low_temp_alm_val_[NUM] |
Minimum temperature which triggers alarm on [NUM] Lora sensor
|
°C |
| overtemp_alm_time_[NUM] |
Maximum temperature which triggers alarm on [NUM] Lora sensor
|
°C |
| real_tm_overtemp_alm_stat_[NUM] |
Continuous over temperature alarm time threshold of the LORA sensor
|
|
| lora_real_tm_hum_[NUM] |
Real time humidity of the [NUM] LORA sensor
|
% |
| low_hum_alm_val_[NUM] |
Minimum humidity which triggers alarm on [NUM] Lora sensor
|
% |
| overhum_alm_time_[NUM] |
Maximum humidity which triggers alarm on [NUM] Lora sensor
|
|
| real_tm_overhum_alm_stat_[NUM] |
Continuous over humidity alarm time threshold of the LORA sensor
|
|
| sens_rssi_[NUM] |
Signal strength of the [NUM] LORA sensor
|
|
| keypad_passwd |
Keypads unlock dynamic password (with P model support, such as G300P,
the device will automatically generate random passwords after unlocking
each time)
|
|
| battery |
Battery level
|
% |
| pwr_int |
Battery voltage
|
V |
| csq_signal |
Network CSQ Signal
|
|
| sim_imsi |
IMSI Code of the SIM Card. The upload is triggered when the network is reonnected
|
|
| client_id |
Client ID
|
|
| term_upg_res |
Terminal upgrade result: Upgrade result of the current version, for
example, 0, G4-360_20220301 Upgrade result: 0 - The upgrade succeeds. 1 -
The upgrade fails
|
|
| hw_vers |
Hhardware version information
|
|
| sf_vers |
Software version information
|
|
| iccid |
Terminal ICCID code
|
|
| gnss_manufacturer |
GNSS module manufacturer.
|
|
| bt_name |
Bluetooth name of the device itself
|
|
| bt_mac |
Bluetooth MAC address of the chip itself
|
|
| wifi_mac |
Wifi mac address of the chip itself
|
|
