Terminal GPRS S8.3

Terminal GPRS S8.3
Производитель: Albatross System
Рейтинг пользователей

(1 Голос)

Обсуждение на форуме

Количество объектов

0
Онлайн
0
Всего
Поддержано в Wialon:
  • Аналоговые датчики
  • Данные с CAN-шины
  • Управляющие команды по GPRS
  • Цифровые датчики
  • Отправка данных по SMS
  • Тревожная кнопка
  • Связь через TCP

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Terminal GPRS S8.3 в диалоге настроек объекта, укажите следующие данные:

Тип устройства: Terminal GPRS S8.3
Уникальный ID: serial

Укажите следующие параметры в конфигурационной программе или в конфигурации Terminal GPRS S8.3 для использования его в Wialon Hosting:

Порт сервера: 21267

Всего в серверном центре Wialon используется 0 объектов Terminal GPRS S8.3 — это составляет 0% от общего количества устройств в категории «Автомобильные контролеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра Описание Единицы измерения
seq_num Sequence number
gsm Gsm signal strength (range: 0 - 33)
gsm_op Identification number of network GSM operator
evt_id Event ID
can_vsp Vehicle speed from CAN bus kmh
mileage Mileage counter based on GPS device
can_tdist Total mileage of the vehicle from CAN bus m
can_tfuel Total fuel consumed by the vehicle from the installation of CAN Module device ml
can_tifuel Total fuel used when idle value read from CAN device ml
can_flp Current fuel level of the vehicle (CAN data) %
can_fll Current fuel level of the vehicle (CAN data) l
fuel_flag Information about can_fll source
can_fc Current fuel consumption of the vehicle (CAN data)
can_a Current acceleration pedal position (CAN data) %
can_espd Engine speed from CAN bus rpm
can_etmp Temperature of the engine (CAN data) °C
can_ehrs Engine total work time (CAN data) min
can_eit Engine total idle time (CAN data) min
can_oilt Current Oil temperature (CAN data) °C
can_hdrot Current hydraulic oil temperature (CAN data) °C
can_tchgr Tachograph data (CAN data)
can_axlew1 Current axle 1 weight (CAN data) kg
can_axlew2 Current axle 2 weight (CAN data) kg
can_axlew3 Current axle 3 weight (CAN data) kg
can_axlew4 Current axle 4 weight (CAN data) kg
can_indsc Set of various indicators status
wire_t1 Temperature read from first one-wire temperature sensor °C
wire_c1 Identification number of Dallas thermometer 1
wire_t2 Temperature read from second one-wire temperature sensor °C
wire_c2 Identification number of Dallas thermometer 2
wire_t3 Temperature read from third one-wire temperature sensor °C
wire_c3 Identification number of Dallas thermometer 3
wire_t4 Temperature read from fourth one-wire temperature sensor °C
wire_c4 Identification number of Dallas thermometer 4
wire_t5 Temperature read from fifth one-wire temperature sensor °C
wire_c5 Identification number of Dallas thermometer 5
wire_t6 Value that inform about CME/CMS error, Jamming and CREG state
wire_c6 Identification number of Dallas thermometer 6
can_rpp Time counter of pressure above configured for Eco driving (CAN data) s
can_ra Counter of dynamic accelerations. Value for Eco driving (CAN data)
can_rb Counter of dynamic brakes. Value for Eco driving (CAN data)
can_esoc Counter of reached engine speed limits. Value for Eco driving (CAN data)
can_r Actual car range value (CAN data)
can_dtorpml Total time of drive with over engine speed limit for Eco driving (CAN data) min
can_dtosl Total time of drive with over speed limit for Eco driving (CAN data) min
drvr1_idt Driver 1 card ID (Tachograph CAN data)
drvr2_idt Driver 2 card ID (Tachograph CAN data)
driver_code Unique driver code read from 1-wire identification device, presented as hexadecimal chars
3dx 3D sensor X axis acceleration
3dy 3D sensor Y axis acceleartion
3dz 3D sensor Z axis acceleration