Squarell REMOTE

Data provider

Kick down switch:
0 - No;
1 - Yes.

Network used

Serial number

DOP

Protocol version

Odometer

Total fuel used

Total engine hours

Actual engine speed

Actual engine torque

Accelerator pedal position

Brake switch:

0 - Off;

1 - On.

Clutch switch:

0 - No;

1 - Yes.

Cruise active:

0 - No;

1 - Yes.

PTO active:

0 - Off/Disabled;

1 - Standby;

5 - PTO active.

Fuel level

Engine temperature

Turbo pressure

Axle weight 0 (counting starts from front)

Axle weight 1

Axle weight 2

Axle weight 3

Service distance

Vehicle Identification Number

Vehicle Registration Number

Actual year

Actual month

Actual day

Actual hours

Actual minutes

Actual seconds

Local minute offset

Local hours offset

Tacho recognized vehicle drive:

0 - No;

1 - Yes.

Tacho work state driver 1:

0 - Rest;

1 - Available;

2 - Work;

3 - Drive

Tacho work state driver 2:

0 - Rest;

1 - Available;

2 - Work;

3 - Drive.

Overspeed measured by tachograph:

0 - No;

1 - Yes.

Driver card of driver 1 present in tachograph:

0 - No;

1 - Yes.

Driver card of driver 2 present in tachograph:

0 - No;

1 - Yes.

Driven time from driver 1:

0 - normal;

1 - 15 min before 4.5 hours;

2 - 4.5 hours;

3 - 15 min before 9 hours;

4 - 9 hours;

5 - 15 min before 16 hours;

6 - 16 hours.

Driven time from driver 2:

0 - normal;

1 - 15 min before 4.5 hours;

2 - 4.5 hours;

3 - 15 min before 9 hours;

4 - 9 hours;

5 - 15 min before 16 hours;

6 - 16 hours.

Driving direction of the vehicle:

0 - forward;

1 - reverse;

2 - error;

3 - not available.

Diagnose test performed by tachograph:

0 - normal;

1 - performance analysis

Tachograph is handling information:

0 - No;

1 - Yes.

System event (cahnge of data on tacho parameters):

0 - no event;

1 - event.

Vehicle speed measured by tachograph

Identification (ID) number of driver 1

Identification (ID) number of driver 2

Tachograph odometer

Tachograph total fuel used

Driver card 1 land code

Duration in cruise active

Driver card 2 land code

Duration driving

Total idling time (vehicle standstill and RPM above 325 rpm)

Fuel used during idling

Total duration of PTO (vehicle standstill)

Fuel used during PTO

Total times of brake application

Total times brake apps > THR

Total time clutch pressed

Duration idle duration > THR

Duration engine torque > THR

Duration speed > THR

Duration RPM > THR

Duration of acceleration > THR

Status bytes from $FMS8 message type. # - byte number (0-5)

ID number of connected trailer 1

Trailer 1 couple status:

0 - not coupled;

1 - coupled.

Weight on axles of trailer 1

State of EBS amber fault warning on trailer 1:

0 - No;

1 - Yes.

State of EBS red fault warning on trailer 1:

0 - No;

1 - Yes.

Amount of VDC active for trailer 1

Amount of ABS active for trailer 1

Total weight of trailer 1

Cargo weight in trailer 1

Trailer identification number 1

Identification number of connected trailer 2

Trailer 2 couple status:

0 - not coupled;

1 - coupled.

Weight on axles of trailer 2

State of EBS amber fault warning on trailer 2:

0 - No;

1 - Yes.

State of EBS red fault warning on trailer 2:

0 - No;

1 - Yes.

Amount of VDC active for trailer 2

Amount of ABS active for trailer 2

Trailer identification number 2