Queclink GV800

Queclink GV800
Производитель: Queclink Wireless Solutions
Обсуждение на форуме

Количество объектов

1
Онлайн
125
Всего
Особенности Queclink GV800:
  • Наличие черного ящика
Поддержано в Wialon:
  • Подключение камеры

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Queclink GV800 в диалоге настроек объекта, укажите следующие данные :

Тип устройства: Queclink GV800
Уникальный ID: imei

Укажите следующие параметры в конфигурационной программе или в конфигурации Queclink GV800 для использования его в Wialon Hosting :

Порт сервера: 21644

Всего в серверном центре Wialon используется 125 объектов Queclink GV800 — это составляет 0.01% от общего количества устройств в категории «Автомобильные контролеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра Описание Единицы измерения
csq_rssi The GSM signal strength level. The range is 0-31, 99 for unknown
csq_ber The quality of the GSM signal. The range is 0-7, 99 for unknown
is_pwr_ext

Whether the external power supply is connected.
0 - not connected
1 - connected

pwr_ext The voltage of the external power supply V
pwr_int The voltage of the backup battery. The value of this field is only valid when the external power is not connected V
charging

Whether the backup battery is charging when the main power supply is connected.
0 - not charging
1 - charging

led_on Indicate whether the LED’s are turned on
input_id ID of the input to which the fuel sensor is connected to, 0 means connected with serial port
battery The current volume of the backup battery %
1wire 1wire device data
harsh_speed_level

The speed level of which the harsh behavior is detected:
0 - unknown speed
1 - low speed
2 - medium speed
3 - high speed

harsh_behavior

Harsh behavior:
0 - harsh braking behavior
1 - harsh acceleration behavior
2 - harsh turn behavior
3 - harsh braking and turn behavior
4 - harsh acceleration and turn behavior
5 - Unknown harsh behavior

can_state

CANBUS Device State:
0 - Abnormal. It fails to receive data from the external CANBUS device.
1 - Normal. It is OK to receive data from the external CANBUS device.

can_vin Vehicle identification number
can_ignition_key

Ignition status:
0 - ignition off.
1 - ignition on.
2 - engine on.

can_total_dist_hect Vehicle total distance Hectometer (H)
can_total_dist_imp Vehicle total distance Impulse (I)
can_total_fuel_used Number of liters of fuel used since vehicle manufacture or device installation L
can_engine_rpm The revolutions per minute rpm
can_vehicle_speed The vehicle speed based on wheel km/h
can_eng_cool_temp Engine coolant temperature °C
can_fuel_consumpt

The fuel consumption. The consumption is calculated depending on values read from vehicle.
Note: The CAN100 device cannot get this value and the value is invalid.

can_fuel_level_l The level of fuel in vehicle tank L
can_fuel_level_p The level of fuel in vehicle tank %
can_range The number of hectometer to drive on remaining fuel Hectometer (H)
can_acc_pedal_press Accelerator pedal pressure %
can_total_eng_hours Time of engine running since vehicle manufacture or device installation h
can_total_driv_time Time of engine running (non-zero speed) since vehicle manufacture or device installation h
can_eng_idle_time Time of engine running during idling status (vehicle stopped) since vehicle manufacture or device installation h
can_idle_fuel_used Total idle fuel used. Number of liters of fuel used since vehicle manufacture or device installation L
can_axle_weight Vehicle axle weight kg
can_driverN_time_st

Driver N time related states:
0 - normal/no limits reached.
1 - 15 min before 41 h.
2 - 41 h reached.
3 - 15 min before 9 h.
4 - 9 h reached.
5 - 15 minute before 16 h (not having 8h rest during the last 24h).
6 - 16 h reached.
7 - other limit.

can_driverN_card

Driver N card state:
1 - card inserted,
0 - no card inserted

can_driverN_work_st

Driver N work state:
0 - normal / no limits reached.
1 - rest / sleeping.
2 - driver available / short break.
3 - drive / behind wheel.

can_indicators

Detailed Information/Indicators:
Bit 1: FL – fuel low indicator (1 – indicator on, 0 – off).
Bit 2: DS – driver seatbelt indicator (1 – indicator on, 0 – off).
Bit 3: AC – air conditioning (1 – on, 0 - off).
Bit 4: CC – cruise control (1 – active, 0 - disabled).
Bit 5: B – brake pedal (1 – pressed; 0 – released).
Bit 6: C – clutch pedal (1 – pressed; 0 – released).
Bit 7: H – handbrake (1 – pulled-up, 0 – released).
Bit 8: CL – central lock (1 – locked, 0 – unlocked).
Bit 9: R – reverse gear (1 – on, 0 – off).
Bit 10: RL – running lights (1 – on, 0 – off).
Bit 11: LB – low beams (1 – on, 0 – off).
Bit 12: HB – high beams (1 – on, 0 – off).
Bit 13: RFL – rear fog lights (1 – on, 0 – off).
Bit 14: FFL – front fog lights (1 – on, 0 – off).
Bit 15: D – doors (1 – any door opened, 0 – all doors closed).
Bit 16: T – trunk (1 – opened, 0 – closed).

can_light

Each bit contains information of particular light:
Bit 1: Running Lights (1 – on, 0 – off).
Bit 2: Low Beam (1 – on, 0 – off).
Bit 3: High Beam (1 – on, 0 – off).
Bit 4: Front Fog Light (1 – on, 0 – off).
Bit 5: Rear Fog Light (1 – on, 0 – off).
Bit 6: Hazard Lights (1 – on, 0 – off).
Bit 7: Reserved.
Bit 8: Reserved.

can_doors

Each bit contains information of one door:
Bit 1: Driver Door (1 – opened, 0 – closed).
Bit 2: Passenger Door (1 – opened, 0 – closed).
Bit 3: Rear Left Door (1 – opened, 0 – closed)
Bit 4: Rear Right Door (1 – opened, 0 – closed).
Bit 5: Trunk (1 – opened, 0 – closed).
Bit 6: Boot (1 – opened, 0 – closed).
Bit 7: Reserved.
Bit 8: Reserved.

can_total_veh_ovspd The total time when vehicle engine speed is greater than the limit defined in CAN100's configuration
can_total_eng_ovspd The total time when vehicle engine speed is greater than the limit defined in CAN100's configuration
can_ad_blue_lvl The level of Ad-Blue
tacho_ovspd_sign The tachograph overspeed signal. The value 1 indicates "overspeed". The value 0 indicates "no overspeed"
tacho_motion_sign The tachograph vehicle motion signal. The value 1 indicates "motion". The value 0 indicates "no motion"
tacho_direction Vehicle driving direction obtained from tachograph
can_ain1 The value of analog input mV
can_engine_braking_factor Counts of braking with brake pedal or with engine
can_pedal_braking_factor Counts of braking with brake pedal or with engine
can_total_accel_kickdowns Total time when accelerator pedal is pressed over 90%
can_total_brakes The total number of braking processes initiated by brake pedal
tacho_drvN_card_number The card number of tachograph driver N
can_exp_info

Detailed Information/Indicators:
Bit 1: W – webasto (1 – on, 0 – off or not available).
Bit 2: BFL – brake fluid low indicator (1 – on, 0 – off or not available).
Bit 3: CLL – coolant level low indicator (1 – on, 0 – off or not available).
Bit 4: BAT – battery indicator (1 – on, 0 – off or not available).
Bit 5: BF – brake system failure indicator (1 – on, 0 – off or not available).
Bit 6: OP – oil pressure indicator (1 – on, 0 – off or not available).
Bit 7: EH – engine hot indicator (1 – on, 0 – off or not available).
Bit 8: ABS – ABS failure indicator (1 – on, 0 – off or not available).
Bit 9: R – reverse.
Bit 10: CHK – check engine indicator (1 – on, 0 – off or not available).
Bit 11: AIR – airbags indicator (1 – on, 0 – off or not available).
Bit 12: SC – service call indicator (1 – on, 0 – off or not available).
Bit 13: OLL – oil level low indicator.

can_rapid_brakings Number of total rapid since installation
can_rapid_accels Number of total rapid accelerations since installation

Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Заполните заявку для начала работы с Wialon

Шаг 1
Шаг 2
Шаг 3
Имя и фамилия*
Компания*
Email*
Телефон