Mobilogix MT2000

Mobilogix MT2000
Производитель: Mobilogix
Обсуждение на форуме

Количество объектов

29
Онлайн
200
Всего
Особенности Mobilogix MT2000:
  • 2G
  • Наличие черного ящика

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Mobilogix MT2000 в диалоге настроек объекта, укажите следующие данные :

Тип устройства: Mobilogix MT2000
Уникальный ID: custom

Укажите следующие параметры в конфигурационной программе или в конфигурации Mobilogix MT2000 для использования его в Wialon Hosting :

Порт сервера: 22114

Всего в серверном центре Wialon используется 200 объектов Mobilogix MT2000 — это составляет 0.01% от общего количества устройств в категории «Автомобильные контролеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра Описание Единицы измерения
msisdn It is a number that uniquely identifies a subscription in a Global Mobile Communications System.
pass Device access password.
imsi The international mobile subscriber identity (IMSI), is a number that uniquely identifies every user of a cellular network (associated with SIM-CARD).
mess_type Type of message.
rep_type

1 = Report is real time from MT2000
0 = Report from buffer

prt_ver Protocol version
term_s_n Terminal serial number
term_stat

Terminal Status representing a set of status bits as follows:
Bit0: 1 = Output Disabled, 0 = Output Enabled;
Bit1: 0 = DisConnected external battery, 1 = Connected external battery;
Bit2: 0 = Without TRIP, 1 = Under TRIP;
Bit3: 0 = Stationary (parked), 1 = Moving;
Bit4: 0 = Outside geofence, 1 = Inside geofence;
Bit5: 0 = ACC off, 1 = ACC on;
Bit6: 0 = Undue movement, 1 = Allowed movement;
Bit7: 0 = Operation Mode, 1 = Standby Mode.

pwr_ext External battery voltage V
gsm_strength GSM Signal strength
gps_fix

GPS fix:
0 = No fix, lat and long fieldsare empty;
1 = Current GPS fix, lat and long fieldsare Current GPS fix;

pwr_int Internal battery voltage V
odometer_trip Partial milage accumulator
param_name Parameter name
param_ack

ACK = 1: Command received and accepted successfully;
ACK = 0: Command received and was not accepted (failed).

param_val

Parameter: The same parameter used in the message tables for S5 and S6;
Value: The value is delivered in the same way as it was configured in S6 (same format, type of field and range).

fota_stat

ACK from FOTA process:
1: All is OK, and the FOTA process is successfully;
0: Something is wrong.

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Заполните заявку для начала работы с Wialon

Шаг 1
Шаг 2
Шаг 3
Имя и фамилия*
Компания*
Email*
Телефон