| alarm |
Alarm status:
1: SOS 2: Power cut alarm 3: Vibration alarm 4: Enter fence alarm 5: Exit fence alarm 6: Over speed alarm 9: Displacement alarm 10: Enter GPS dead zone alarm 11: Exit GPS dead zone alarm 12: Power on alarm 13: GPS First fix notice 14: Low battery alarm 15: Low battery protection alarm 16: SIM change notice 17: Power off alarm 18: Airplane mode alarm 19: Disassemble alarm 20: Door alarm 21: Shutdown alarm due to low power 22: Sound alarm 23: Pseudo base-station alarm 24: Open cover alarm 25: Internal low Battery Alarm 32: Sleep mode alarm 33: Reserve 34: Reserve 35: Fall alarm 36: Insert charger alarm(Asset tracker) 41: Harsh acceletation alarm 48: Harsh braking alarm 42: Sharp Left Turn Alarm 43: Sharp Right Turn Alarm 44: Sharp Crash Alarm 45: Vehicle Rolling alarm 75: Tilting alarm 76: Sharp turn alarm 77: Abrupt lane switching alarm 78: Vehicle stability 79: Vehicle angle abnormality 254: ACC On alarm |
|
| alarm_status |
Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS |
|
| mcc |
Mobile Country Code |
|
| mnc |
Mobile Network Code |
|
| lac |
Location Area Code |
|
| cell_id |
Cell Tower ID |
|
| voltage |
Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition |
|
| gsm |
GSM signal strength degree |
|
| pwr_ext |
External power voltage |
V |
| alm1 |
Bitwise parameter (1 - ON, 1 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Displacement Alarm
bit5 - SMS Alarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Vibration Alarm |
|
| alm2 |
Bitwise parameter (1- ON, 0 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Low Battery Alarm
bit5 - SMS Alarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Low Battery Alarm |
|
| alm3 |
Bitwise parameter (1 - ON, 0 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Power Off Alarm
bit5 - SMSAlarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Overspeed Alarm |
|
| sta1 |
Bitwise parameter (1 - ON, 0 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Power Off Alarm
bit5 - SMSAlarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Overspeed Alarm |
|
| sos_numN |
SOS Number |
|
| center_num |
Centre Number |
|
| fence |
Fence |
|
| dyd |
Fuel/Electricity, Cutoff Status
|
|
| mode |
Mode |
|
| mileage |
Mileage |
|
| door |
Bitwise parameter:
bit 0 - Door Status: 1 - ON, 0 - OFF
bit 1 - Triggering Status: 1 - High triggering, 0 - Low triggering
bit 2 - IO Status: 1 - High, 0 - Low
|
|
| func_code |
DriveraId (transparent): function code:
0x36 - Event (Warning) Report |
|
| warn_id |
DriveraId (transparent): warning id:
0x00: not available,
0x01: start flag,
0x02: end flag
The byte is only for warning or event type
that have both start and end flag; if no
start or end flag, the byte is not available, input 0x00.
|
|
| warn_type |
DriveraId (transparent): warning type:
0x01: Fatigue driving warning,
0x02: Calling warning,
0x03: Smoking warning,
0x04: Distraction warning
|
|
| fat_deg |
DriveraId (transparent): Fatigue degree, Indicates the degree of fatigue, ranging
from 1 to 10, the greater the value, the
more severe the fatigue |
|
| veh_state |
DriveraId (transaprent): Vehicle state |
|
| mult_type_# |
DriveraId (transparent): Multimedia type:
0x00: picture,
0x01: audio,
0x02: video
|
|
| mult_id_# |
DriverId (transport): Multimedia ID |
|
| rfid_track_1 |
Data from rfid track 1 |
|
| rfid_track_2_prm_1 |
Data from rfid track 1 param 1 |
|
| rfid_track_2_prm_2 |
Data from rfid track 2 param 2 |
|
| rfid_track_3 |
Data from rfid track 3 |
|
| inputs |
Terminal status: 1: defense Activated(1), defense Deactivated(0) 2: ACC high(1), ACC low(0) 3: Charge On(1), Charge Off(0) 4-6: See alarm_status 7: GPS tracking is on(1), GPS tracking is off(0) 8: oil and electricity disconnected(1), oil and electricity connected(0) |
|
