ToTarget ELOCK A13

ToTarget ELOCK A13
Производитель: Totarget
Обсуждение на форуме

Количество объектов

0
Онлайн
1
Всего
Особенности ToTarget ELOCK A13:
  • 3G
  • 4G/LTE
  • Наличие черного ящика
  • Электронная пломба

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от ToTarget ELOCK A13 в диалоге настроек объекта, укажите следующие данные :

Тип устройства: ToTarget ELOCK A13
Уникальный ID: serial

Укажите следующие параметры в конфигурационной программе или в конфигурации ToTarget ELOCK A13 для использования его в Wialon Hosting :

Порт сервера: 22284

Всего в серверном центре Wialon используется 1 объектов ToTarget ELOCK A13 — это составляет 0% от общего количества устройств в категории «Стационарные устройства».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра Описание Единицы измерения
param_id_#

Parameter value

event_#

Event

alarm_flag

Alarm flag (Bits0-31):

Bit0: 1: Emergency alarm, trigger after triggering alarm switch

Bit1: 1: Over speed alarm

Bit2: 1: Driving alarm malfunction

Bit3: 1: Risk warning

Bit4: 1: GNSS module malfunction

Bit5: 1: GNSS antenna was notconnected or cut

Bit6: 1: GNSS antenna short circuited

Bit7: 1: The terminal main power undervoltage

Bit8: 1: The terminal main power is turned off

Bit9: 1: Terminal LCD or displaymalfunction

Bit10: 1: TTS module malfunction

Bit11: 1: Camera malfunction

Bit12: 1: Road transportcertificate IC card module malfunction

Bit13: 1: Over speed warning

Bit14: 1: Fatigue driving warning

Bit15-Bit19: Reserve

Bit20: 1: Enter and exit the area

Bit21: 1: Enter and exit the route

Bit22: 1: The driving time of theroute is not enough/too long

Bit23: 1: Off track alarm

Bit24: 1: Reserved

Bit25: 1: Reserved

Bit26: 1: The vehicle is stolen(through vehicle burglar alarm)

Bit27: 1: Illegal ignition of vehicle

Bit28: 1: Illegal displacement ofvehicle

Bit29: 1: Collision warning

Bit30: 1: Rollover warning

Bit31: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)

state_flag

Status (Bits 0-31):

Bit0: 0: ACC off; 1: ACC on

Bit1: 0: Not positioning; 1: Positioning

Bit2: 0: North latitude; 1: South latitude

Bit3: 0: East longitude; 1: West longitude

Bit4-Bit7: Reserved

Bit8-Bit9: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load

(It can be used for empty/heavy passenger car and empty/full load

status of the truck, manual input or sensor acquisition)

Bit10: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect

Bit11: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect

Bit12: 0: Vehicle door unlocked; 1: Vehicle door locked

Bit13: 0: Door 1 close; 1: Door 1 open (front door)

Bit14: 0: Door 2 close; 1: Door 2 open (middle door)

Bit15: 0: Door 3 close; 1: Door 3 open (back door)

Bit16: 0: Door 4 close; 1: Door 4 open (door of driver’s seat)

Bit17: 0: Door 5 close; 1: Door 5 open (user-defined)

Bit18: 0: No GPS positioning; 1: GPS positioning

Bit19: 0: No Beidou positioning; 1: Beidou positioning

Bit20: 0: No GLONASS positioning; 1: GLONASS positioning

Bit21: 0: No Galileo positioning; 1: Galileo positioning

Bit22-31: Reserve

odometer

Odometer

gsm

Wireless network signal strength

imei

IMEI

ver

Version

iccid

SIM ICCID

alarm_status

Alarm status (Bits 0-24):

Bit0: Lock rope cut alarm;

Bit1: Emergency unlocking alarm;

Bit2: Removed alarm;

Bit3: Lid opened alarm;

Bit4: Vibration alarm;

Bit5: Tilt alarm;

Bit6: Rollover alarm;

Bit7: High temperature alarm;

Bit8: Low temperature alarm;

Bit9-24: Reserved.


switch_status

Switch status (Bits0-24):

Bit0: Knob on;

Bit1: Motor release;

Bit2: Lock rod opened;

Bit3: Lock rod cut;

Bit4: Lock rope cut;

Bit5: Lid opened;

Bit6: Shell opened;

Bit7: Removed;

Bit8: 1 - Vibration, 0 - Static;

Bit9: Sleep mode;

Bit10: Deep sleep mode;

Bit11: Sattelite positioning off;

Bit12: Device power off;

Bit13: Firmware remote upgrade in progress;

Bit14-20: No 14- No 19 switch on;

Bit20-23: Reserved.

battery

Device power

%
accel_x G-sensor acceleration of X axis g
accel_y

G-sensor acceleration of Y axis

g
accel_z

G-sensor acceleration of Z axis

g
temp_#

#-channel temperature

C
power_int

Device power voltage

V
hum_# #-channel humidity %

Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Заполните заявку для начала работы с Wialon

Шаг 1
Шаг 2
Шаг 3
Имя и фамилия*
Компания*
Email*
Телефон