Jointech JT701D

Jointech JT701D
Производитель: Jointech
Обсуждение на форуме

Количество объектов

717
Онлайн
1667
Всего
Особенности Jointech JT701D:
  • Электронная пломба

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Jointech JT701D в диалоге настроек объекта, укажите следующие данные :

Тип устройства: Jointech JT701D
Уникальный ID: serial

Укажите следующие параметры в конфигурационной программе или в конфигурации Jointech JT701D для использования его в Wialon Hosting :

Порт сервера: 22068

Всего в серверном центре Wialon используется 1667 объектов Jointech JT701D — это составляет 1% от общего количества устройств в категории «Стационарные устройства».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра Описание Единицы измерения
event

Event source type has the following event sources:
1:Swipe authorization card;
2:Swipe illegal card;
3:Swipe the vehicle ID cards bound;
4:password unlock;
5:record to lock automatically;

swipe_auth_card Swipe authorization card value
swipe_card_id Swipe illegal card value
swipe_veh_id_bound Swipe the vehicle ID cards bound value
pass_unlock Password unlock value
auto_lock Record to lock automatically value
mileage

The current mileage, calculated under vibration status

gps_quantity

Indicated the quantity of connected GPS, the figure will be 0 if the device is located by LBS.

vichle_id The Vehicle ID connected with this device.
device_status

Device’s status or alarms. byte 1 at right side, byte3 at left side, the detail is as follows:
BIT 1 Whether located by LBS, 1 means located by LBS, 0 means located by GPS
BIT2Enter Geo-fence alarm, 1 means trigger this alarm, 0 means normal.
BIT3 Exit Geo-fence alarm, 1 means trigger this alarm, 0 means normal.
BIT4 Steel String cut alarm, 1 means trigger this alarm, 0 means normal.
BIT5 Vibration alarm, 1 means trigger this alarm, 0 means normal.
BIT6 need to be confirmed, 1 means need to be confirmed. 0 means no need to be confirmed.
Real time data,this BIT fixed 0;
Alarm data ,this BIT fixed 1;
Re-uploading data ,this BIT fixed 1;
BIT7 Steel String status: 1 means strings inserted, 0 means disconnect
BIT8 Motor Lock status: 1 means lock, 0 means unlock.

BIT9 Unlocking alarm 1 means trigger this alarm, 0 means normal.
BIT10 Wrong password alarm ( Input the incorrect password more than 5 times.) 1 means trigger this alarm, 0 means normal.
BIT11 Swipe unauthorized RFID tag alarm 1 means trigger this alarm, 0 means normal.
BIT12 Low battery alarm 1 means trigger this alarm, 0 means normal.
BIT13 Open Back Cap alarm 1 means trigger this alarm, 0 means normal.
BIT14 Back Cap status: 1 means back cap close status,0 means back cap opening
BIT15 Motor fault alarm 1 means Motor fault alarm ,0 means normal.
Other BITS Reserved

battery

Electric quantity, indicated by hexadecimal, 0x64 means the current battery is 100%, accuracy is 5%,if the value is 0xFF, means the USB is charging.

cell_id Cell ID
lac LAC
gsm

Indicates the strength of GSM signal. The maximum value for GSM signal strength is 31.

serial_num

Serial number, Sending one more data, increase1. Range: 0x00~0xFF.

Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Заполните заявку для начала работы с Wialon

Шаг 1
Шаг 2
Шаг 3
Имя и фамилия*
Компания*
Email*
Телефон