cam_num |
Total number of cameras that this
device supports |
|
cam_status |
Bitwise parameter of cameras connected status. bit1 - 1 indicates Camera 1 is connected;
0 indicates Camera 1 is disconnected; ... bit64 - indicates Camera 64 status
|
|
time_start |
Start time
|
|
time_end |
End time
|
|
alarm_flag8 |
Alert event code Bytes 0–5: reserved Bytes 6–7: Correspond to Meitrack's event codes, big-endian
|
|
av_type |
Audio and video resource type 0: Audio and video 1: Audio 2: Video 3: Video, or audio and video
|
|
stream_type |
Bitrate type 0: All streams 1: Major stream 2: Minor stream
|
|
cap_type |
Memory type 0: All memories 1: Active memory 2: Standby memory
|
|
file_length |
File size. Unit: byte, big-endian
|
|
video_uri |
Video URI
|
|
video_type |
Video type
|
|
ftp_upload_percent |
Uploading progress percentage. Value
range: 0–100.
|
|
ftp_filename |
File name
|
|
RFID |
RFID code |
|
event_code |
Event Code |
|
gps_valid |
GPS status |
|
gsm_signal |
GSM signal |
|
hdop |
Horizontal Dilution of Precision |
|
mileage |
Total accumulated mileage |
km |
run_time |
Total accumulated runtime |
|
battery |
battery charge |
% |
adc5 |
Voltage of external power supply * 100
|
V |
fuel_percent |
Percentage of remain fuel |
% |
temp_N |
Temperature sensor N value |
°C |
wln_accel_max |
Maximum acceleration value |
g |
wln_brk_max |
Maximum deceleration value |
g |
lls_N_temp |
LLS fuel sensor N temperature
|
°C |
lls_N_val |
LLS fuel sensor value
|
|
lls_N_freq |
LLS fuel sensor frequency
|
|
dr_f_status |
Driver fatigue alert:
- 01 - Mild fatigue
- 02 - Moderate fatigue
- 03 - Severe fatigue
- 04 - Distraction alert
- 05 - Absence alert
- 06 - On Phone Call alert
- 07 - Smoking alert
- 08 - Yawning alert
|
|
mccN |
Mobile country code for SIM card in slot N
|
|
mncN |
Mobile network code for SIM card in slot N
|
|
lacN |
Local area code for SIM card in slot N
|
|
cell_idN |
Cellular station identification for SIM card in slot N
|
|
outputs_status |
Output status
|
|
inputs_status |
Bits 0–31 correspond to status of input ports 1–31
|
|
system_flag |
The data is available only when the GPRS event code is 35. Bit 0: Whether to modify the EEP2 parameter. When the parameter value is 1, the EEP2 parameter is modified. Bit 1: Indicates the ACC status. When the parameter value is 1, the ACC is on. Bit 2: Indicates the anti-theft status. When the parameter value is 1, the tracker is in the arming state. Bit 3: Reserved. Bit 4: Moving flag. When the parameter value is 1, the tracker is moving. Bit 5: Whether to connect the external power supply. When the parameter value is 1, the external power supply is connected. Bit 6: Whether the tracker is charging. When the parameter value is 1, the tracker is charging. Bit 7: Whether to enable the sleep mode. When the parameter value is 1, the sleep mode is enabled. Bit 8: Whether to connect the FMS. When the parameter value is 1, the FMS is connected. Bit 9: Whether to enable the FMS function. When the parameter value is 1, the function is enabled.
|
|
netw_ver |
The version of the network being connected, 0x01 by default
|
|
netw_type |
The type of network being connected, 0: No Network, 1: Mobile Network, 2:WIFI (Reserved), 3: LAN (Reserved)
|
|
adc1-3 |
Analog input value * 100
|
V |
adc4 |
Battery analog *100
|
V |