Hero-ME41-04

Hero-ME41-04
Forum de discussion

Nombre des unités

912
En ligne
3644
Nombre total
Caractéristiques Hero-ME41-04:
  • 3G
  • Boîte à mémoire
Compatible avec Wialon:
  • Capteurs analogiques (ADC)
  • Connexion de caméra
  • Event video
  • Gestion à distance via GPRS
  • Capteurs numériques
  • Live stream
  • Manual video saving
  • Playback
  • Communication via TCP

Afin d'identifier le boîtier Hero-ME41-04 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS: Hero-ME41-04
ID unique: custom

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Hero-ME41-04 pour les utiliser dans Wialon Hosting :

Port du serveur: 21426

3644 unités Hero-ME41-04 connectées au le centre de données Wialon — Ça fait 14.84% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
video_uri video URI
video_type video type: video/mp4
text information message
at Access network. 1-Ethernet 2-WIFI 3-2G
mt Media Type. 1-live view 2-playback 3-audio 4-file transmission 5-serial transmission
ch Media channel. starting from 1, 0 means no need for the channel.
mb mobile phone number
dt Device Type
ver Current version of device
ap The hotspot when MDVR connects to the sever in WiFi mode.
fuel_cons Fuel consumption
balance_fuel Balance fuel
mobile_net Mobile network. 0--unknown 1--normal 2--abnormal 3—not exist
gps_module GPS location module. 0--unknown 1--normal 2--abnormal 3—not exist
wifi_module WIFI module. 0--unknown 1--normal 2--abnormal 3—not exist
gsensor_status GSensor status. 0--unknown 1--normal 2--abnormal 3—not exist
recording_status

Bit0 - channel 1 is recording
Bit1 - channel 2 is recording
Bit2 - channel 3 is recording
Bit3 - channel 4 is recording
Bit4 - channel 5 is recording
etc.


status1

bit0 - ACC (0-invalid, 1-valid)
bit1-break (0-invalid, 1-valid)
bit2 - turn left (0-invalid, 1-valid)
bit3 - turn right (0-invaid, 1-valid)
bit4 - forward (0-invalid, 1-valid)
bit5 - backword (0-invalid, 1-valid)
bit6 - left front door (0-Close, 1-Open)
bit7 - right front door (0-close, 1-Open)

status2

bit0 - left mid door (0-close, 1-open)
bit1 - right mid door(0-close, 1-open)
bit2 - left back door(0-close, 1-open)
bit3 - right back door(0-close, 1-open)

x_accel GSensor acceleration, X axis g
y_accel GSensor acceleration, Y axis g
z_accel GSensor acceleration, Z axis g
gsensor_tilt GSensor tilt g
gsensor_impact GSensor impact g
position_accuracy Positioning accuracy m
location_type Location type. 0—location invalid; 1--GPS; 2--BD; 3--Glonass; 4--AGPS; 5--base station location; 6 - WIFI
mob_signal Mobile signal intensity
mob_net_type

Mobile network type:
0 - unknown
3 - 2G
4 - 3G
5 - 4G
6 - 5G

wifi_signal Wi-Fi signal intensity
wifi_net_addr Wi-Fi network address
wifi_gateway Wi-Fi gateway address
wifi_subnet Wi-Fi subnet mask
ssid Wi-Fi ssid
hdN_status

Hard disk N (disk index) status:
0 - unknown
1 - recording
2 - idle
3 - abnormal
4 - full

hdN_size Hard disk N (disk index) size Mega Bytes
hdN_capacity Hard disk N (disk index) balance capacity Mega Bytes
alarms

Alarm status:
bit0—video loss (0: data invalid, 1: data valid)
bit1—motion detection (0: data invalid, 1: data valid)
bit2—video blind (0: data invalid, 1: data valid)
bit3—alarm input trigger(0: data invalid, 1: data valid)
bit4—over speed alarm (0: no trigger, 1: trigger)
bit5—low speed alarm (0: no trigger, 1: trigger)
bit6—emergency alarm (0: no trigger, 1: trigger)
bit7—over time stop (0: no trigger, 1: trigger)
bit8—vibration alarm (0: no trigger, 1: trigger)
bit9—out of GEO fencing alarm (0: no trigger, 1: trigger)
bit10—enter GEO fencing alarm (0: no trigger, 1: trigger)
bit11—exist line alarm (0: no trigger, 1: trigger)
bit12-enter line alarm (0: no trigger, 1: trigger)
bit13—fuel level alarm (0: no trigger, 1: trigger)

video_loss

bit0 - channel 1 video loss indicator (0: no video loss, 1: video loss)
bit1 - channel 2 video loss indicator (0: no video loss, 1: video loss)
bit2 - channel 3 video loss indicator (0: no video loss, 1: video loss)
etc.

motion

Motion detection:
bit0 - channel 1
bit1 - channel 2
etc.

video_blind

Video blind:
bit0 - channel 1
bit1 - channel 2
etc.

alarm_inputs

Alarm inputs triggered:
bit0 - input 1
bit1 - input 2
etc.

in_veh_temp Temperature in vehicle
out_veh_temp Temperature outside of vehicle
motor_temp Motor temperature
device_temp Device temperature
in_veh_hum Humidity in vehicle
out_veh_hum Humidity outside of vehicle
alarm_ec

Event

type code:
0 - unknown
1 - video lost
2 - motion detection
3 - video blind
4 - input trigger
5 - emergency alarm
6 - low speed alarm
7 - over speed alarm
8 - low temperature alarm
9 - high temperature alarm
10 - humidity alarm
11 - parking over time
12 - acceleration alarm
13 - GEO fencing
14 - electronic route
15 - abnormal openclose the door
16 - storage abnormal
17 - fatigue driving
18 - fuel consumption abnormal
19 - illegal ACC
20 - GPS module abnormal
21 - front panel open
22 - Swipe card
23 - IBUTTON
24 - Harsh acceleration
25 - Harsh braking
26 - Low speed warning
27 - High speed warning
28 - Voltage alarm
29 - People counting
30 - ADAS alarm
31 - “Acc on”. Report once at boot
32 Idle
33 Gps antenna break
34 Gps antenna short
35 IO output
36 CAN Bus connection abnormal
37 Towing <
38 Free wheeling
39 RPM exceeds
40 Vehicle Move
41 Trip start(st/et/dtu time same)
42 In trip
43 Trip ends (periodically report after acc off)
44 GPS location recover
45 Video abnormal
768 Trip notification
769 Upgrade notification
1280 Alarm file
281 Timer Snapshot
1282 Alarm file (in visible partition)
1283 ftp file upload notification

alarm_st Event start time
alarm_et Event end time
device_tm Event device time
swipe_card Swipe card number
sc_up

Swipe card information. Onboard/offboard:
1 — Onboard (check in)
2 — Off board (check out)
Else — invalid


sc_ht

Swipe card information. History:
1 — Historical data
2 — Real time data
Else — invalid

total_mileage Total mileage meter
cur_mileage Current day mileage meter
ibutN iButton code. N - iButton number
adas_alarm_type

ADAS:

1 - Forward collision alarm
2 - Lane departure warning
3 -Car distance too near
4 - Pedestrian collision alarm
5 - Frequent lane change alarm
6 - Road sign violate alarm
7 - Harsh Acceleration
8 - Harsh Breaking
9 - Safety Distance
16 - Traffic Sign Recognition
17 - FCW: Forward collision warning
18 - HMW: Headway monitoring warning
19 - Left Lane departure warning
20 - Right Lane departure warning
21 - VB Forward Collision Warning

DMS:
33 - Fatigue driving alarm
34 - Phone call alarm
35 - Smoking alarm
36 - Distracted driving alarm
37 - Driver abnormal alarm
49 - Driver change event
65 - Eye closed
66 - Yawning
67 - Camera cover
68 - Distracted Driving
69 - Seat belt not fastened
70 - No driver
72 - Driver shift
73 - Driver back
80 - Infrared sunglasses
81 - Driver ID identified successfully
82 - Driver ID identified failed
83 - No Driver face detected
85 - Mask not worn

err

Error code:
0 Success
1 Duplicated ID
2 invalid parameter
3 invalid command
4 device busy
5 connection lost
6 related file not exist
7 disk not exist
8 follow up data
9 file search finish
10 Device is not authorized
255 Unknown error

vt

Acceleration alarm, trigger threshold

tt

Acceleration alarm, time threshold

max

Acceleration alarm, Maximum value during the alarm

min

Acceleration alarm, Minimum value in a period

avg

Acceleration alarm, Average value in a period

cur

Acceleration alarm, Current value when reporting

dt_

Acceleration alarm, direction:

1- X direction,

2- Y direction,

3- Z direction,

4- impact,

5- tilt,

6- turn

pre

Acceleration alarm, The value of one second before

drname

Driver name

drid

Driver ID

voltage_N

Vehicle voltage. Double value, in V.

filename

Corresponding file name of recording file. It is usually used in alarm recording playback, and start time/end time is invalid in this mode.

filetype

0 -- unknown
1 -- general recording
2 -- alarm recording
3 -- general snapshot file
4 -- alarm snapshot file
5 -- upgrade file
6 -- log file
7 -- Configuration file
8 -- Black box file
9 -- Visibble alarm video/snapshot

obd_t_mil_N

Accumulated mileage in km.

obd_t_fuel_cons_N

Cumulative fuel consumption in L.

obd_i_fuel_cons_N

Instant fuel consumption in L/km

obd_pwr_N

Vehicle voltage in V

obd_rpm_N

Engine speed in rpm

obd_speed_N

speed, needs *100 for km/h

obd_air_flow_N

Intake air flow in G/s

obd_air_press_N

Intake pressure in Kpa

obd_cool_temp_N

Coolant temperature

obd_int_temp_N

Intake air temperature

obd_eng_load_N

Engine load in %

obd_thr_pos_N

Throttle position in %

obd_rem_oil_N

Remaining oil in %

up0

The number of onbus people, <0 means invalid

dw0

The number of offbus people, <0 means invalid

up1

The number of onbus people, <0 means invalid

dw1

The number of offbus people, <0 means invalid

cnt_lon

People counting longitude

cnt_lat

People counting latitude

pat

People counting.
0-real time
1-stored and forward (data was resent after network works)

cnt_tm

People countin time

va

People counting, current onbus people number byte is valid or not (device calculated), 0-invalid , 1-valid

swipe_card_rvrsd

Card number, etc.

event_type

Event

type code:
0 - unknown
1 - video lost
2 - motion detection
3 - video blind
4 - input trigger
5 - emergency alarm
6 - low speed alarm
7 - over speed alarm
8 - low temperature alarm
9 - high temperature alarm
10 - humidity alarm
11 - parking over time
12 - acceleration alarm
13 - GEO fencing
14 - electronic route
15 - abnormal openclose the door
16 - storage abnormal
17 - fatigue driving
18 - fuel consumption abnormal
19 - illegal ACC
20 - GPS module abnormal
21 - front panel open
22 - Swipe card
23 - IBUTTON
24 - Harsh acceleration
25 - Harsh braking
26 - Low speed warning
27 - High speed warning
28 - Voltage alarm
29 - People counting
30 - ADAS alarm
31 - “Acc on”. Report once at boot
32 Idle
33 Gps antenna break
34 Gps antenna short
35 IO output
36 CAN Bus connection abnormal
37 Towing <
38 Free wheeling
39 RPM exceeds
40 Vehicle Move
41 Trip start(st/et/dtu time same)
42 In trip
43 Trip ends (periodically report after acc off)
44 GPS location recover
45 Video abnormal
768 Trip notification
769 Upgrade notification

ft

file type

0 -- unknown
1 -- general recording
2 -- alarm recording
3 -- general snapshot file
4 -- alarm snapshot file
5 -- upgrade file
6 -- log file
7 -- Configuration file
8 -- Black box file
9 -- Visibble alarm video/snapshot

fn

file path
For example, “/mnt/sd1/xxxx.264”

ts

Transmission Status

1 -- Start
0 -- End


Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1
Étape 2
Étape 3
Prénom et nom *
Entreprise*
Email*
Téléphone