Traceur GPS Tramigo T24 | Intégré à Wialon

Caractéristiques Tramigo T24:

Boîte à mémoire
Compatibilité avec GLONASS

Compatible avec Wialon:

Capteurs analogiques (ADC)
Capteurs numériques
Bouton d'alarme
Communication via TCP

Afin d'identifier le boîtier Tramigo T24 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	Tramigo T24
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Tramigo T24 pour les utiliser dans Wialon Hosting :

Port du serveur:

22275

3598 unités Tramigo T24 connectées au le centre de données Wialon — Ça fait 0.15% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
seq_num	Sequence of message
msg_id	Type of Message 0 - Basic. Contains basic location information and signal quality; 1 - TLD. Contains Tramigo Landmark information; 4 - Trip. Contains information of a completed trip; 20 - Additional information like temperature and device I/O Extended states; 22 - Zone. Contains name of a zone and state if inside/outside of zone; 40 - Analog and OneWire. Values from Analog Input and OneWire accessories of device.
report_trigger	Report trigger code
gsm	GSM signal quality	-dBm
gps_antenna	State of the GPS antenna. 0 = LNA off; 1 = Short circuit; 2 = Internal 3 = External
distance	Current odometer distance	m
pwr_int	Voltage of the internal battery	mV
battery_charging	Units: mV Status of the internal battery charger. 0 = Power disconnected; 1 = Charging; 2 = Battery full; 3 = Charging error
state_flags	Bit flags for the unit status. 0 - Charging. Bit0 is set if backup battery is being charged. 1 - Reserved 2 - Battery Low. Bit2 is set if backup battery is low. 3 - No Battery. Bit3 is set if no backup battery is installed in device; 4 - Bad Battery. Bit4 is set if bad backup battery is detected; 5 - Ignition On / Off. Bit5 is set if ignition is ON. Either I/O based or Shock Sensor; 6 - Reserved; 7 - Parked. Bit7 is set if device/vehicle is parked; 8 - Moving. Bit8 is set if device/vehicle is moving; 9 - Stopped. Bit9 is set if device/vehicle is stopped; 10 - Reserved.
mcc	Mobile Country Code of the current GSM operator
mnc	Mobile Network Code of the current GSM operator
lac	Location Area Code of the current serving GSM cell
cell_id	Cell ID of the current serving GSM cell
gsm_status	Status of the GSM network registration 0 = No Network; 1 = Home network; 2 = Searching; 3 = Registration denied; 5 = Roaming network
gsm_temp	Temperature of the GSM module	C
speed_max	Maximum speed since the previous report	km/h
speed_min	Minimum speed since the previous report	km/h
gps_signal	Units: km/h GPS signal quality 0-100	%
gsm_signal	GSM signal quality 0-100	%
tld_ref_id	IF of the closest TLD location used as reference to previously indicated full TLD information Zero if TLD location is not available
bearing_to_tld	Bearing from the current location to the reference TLD location Units: degrees, 0=north, 90=east, etc.
distance_to_tld	Distance from the current location to the reference TLD location	m
battery_level	Battery level 0-100.	%
odometer	The odometer of the current trip.	m
driver_id	OneWire device ID of currently attached Driver ID fob.
temp_#	Temp Sensor # temperature	C
analog	Voltage at the Analog Input of the device.	mV
city	Name of city.
district	Name of larger area, like town or district.
landmark	Name of landmark.
country_code	Country where the landmark resides, 2 characters.

Nom du paramètre

Description

Unités

seq_num

Sequence of message

msg_id

Type of Message
0 - Basic. Contains basic location information and signal quality;
1 - TLD. Contains Tramigo Landmark information;
4 - Trip. Contains information of a completed trip;
20 - Additional information like temperature and device I/O Extended states;
22 - Zone. Contains name of a zone and state if inside/outside of zone;
40 - Analog and OneWire. Values from Analog Input and OneWire accessories of device.

report_trigger

Report trigger code

gsm

GSM signal quality

-dBm

gps_antenna

State of the GPS antenna.

0 = LNA off;
1 = Short circuit;
2 = Internal
3 = External

distance

Current odometer distance

pwr_int

Voltage of the internal battery

battery_charging

Units: mV Status of the internal battery charger.

0 = Power disconnected;
1 = Charging;
2 = Battery full;
3 = Charging error

state_flags

Bit flags for the unit status.

0 - Charging. Bit0 is set if backup battery is being charged.
1 - Reserved
2 - Battery Low. Bit2 is set if backup battery is low.
3 - No Battery. Bit3 is set if no backup battery is installed in device;
4 - Bad Battery. Bit4 is set if bad backup battery is detected;
5 - Ignition On / Off. Bit5 is set if ignition is ON. Either I/O based or Shock Sensor;
6 - Reserved;
7 - Parked. Bit7 is set if device/vehicle is parked;
8 - Moving. Bit8 is set if device/vehicle is moving;
9 - Stopped. Bit9 is set if device/vehicle is stopped;
10 - Reserved.

mcc

Mobile Country Code of the current GSM operator

mnc

Mobile Network Code of the current GSM operator

lac

Location Area Code of the current serving GSM cell

cell_id

Cell ID of the current serving GSM cell

gsm_status

Status of the GSM network registration

0 = No Network;
1 = Home network;
2 = Searching;
3 = Registration denied;
5 = Roaming network

gsm_temp

Temperature of the GSM module

speed_max

Maximum speed since the previous report

km/h

speed_min

Minimum speed since the previous report

km/h

gps_signal

Units: km/h GPS signal quality 0-100

gsm_signal

GSM signal quality 0-100

tld_ref_id

IF of the closest TLD location used as reference to previously indicated full TLD information Zero if TLD location is not available

bearing_to_tld

Bearing from the current location to the reference TLD location Units: degrees, 0=north, 90=east, etc.

distance_to_tld

Distance from the current location to the reference TLD location

battery_level

Battery level 0-100.

odometer

The odometer of the current trip.

driver_id

OneWire device ID of currently attached Driver ID fob.

temp_#

Temp Sensor # temperature

analog

Voltage at the Analog Input of the device.

city

Name of city.

district

Name of larger area, like town or district.

landmark

Name of landmark.

country_code

Country where the landmark resides, 2 characters.

Remplissez le formulaire pour commencer à travailler avec Wialon

Produits

Produits de niche pour des tâches spécifiques

Tramigo T24

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon