Traceur GPS Queclink GL300VC | Intégré à Wialon

Caractéristiques Queclink GL300VC:

Boîte à mémoire

Compatible avec Wialon:

Gestion à distance via GPRS
LBS
Gestion à distance via SMS
Communication via TCP
Communication via UDP

Afin d'identifier le boîtier Queclink GL300VC les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	Queclink GL300VC
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Queclink GL300VC pour les utiliser dans Wialon Hosting :

Port du serveur:

21054

7806 unités Queclink GL300VC connectées au le centre de données Wialon — Ça fait 0.33% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
battery	Battery level	%
charging	Whether the battery is charging when the external power supply is connected: 0: Not charging 1: Charging
external_pwr	External power supply: 0: Not connected 1: Connected
gps_antenna_type	A numeric to indicate which GPS antenna is working now 0: inside GPS antenna
gps_on_need	Whether to close GPS chip after retrieving GPS position information: 0: Never close GPS chip 1: Close GPS chip after retrieving GPS information every time 2: Never close GPS chip only in ignition on state or movement state 3: Never open GPS chip
gsm_level	The GSM signal strength level
gsm_quality	The quality of GSM signal
hdop	Horizontal Dilution of Precision
ign	Ignition state: 0: off, 1: on
ign_off_duration	Duration since last time the ignition is off	s
ign_on_duration	Duration since last time the ignition is on	s
led_on	The working mode of LEDs
mileage	The total mileage	km
movement_cause	The enter movement cause defines the factor who triggers the message: 0: Triggered by motion sensor detection. It is defaulted 1: Triggered by RTO sub command RTL 2: Triggered by the command GTLSW from EBK
movement_state	0: The state of the device changed from motion to rest 1: The state of the device changed from rest to motion
odo_mileage	The total mileage in the position	km
pwr_int	Battery voltage	V
report_type	Message type
state	The current motion state of the device: 21: The device attached vehicle is ignition on and motionless 22: The device attached vehicle is ignition on and moving 41: The device is motionless without ignition on 42: The device is moving without ignition on
temp_int	The temperature of the device	°C
geo_active	Indicate active or deactive Geo-Fence: 0 - Deactivate Geo-Fence 1 - Activate Geo-Fence
geo_mode	The new mode of Geo-Fence
geo_radius	The radius of Geo-Fence	m
geo_ch_int	The check interval of Geo-Fence	sec
upd_code	Confirmation/downloading/updating information from firmware updating: 100/110: the update command is confirmed by the device. 101/111: the update command is refused by the device. 102/112: the update process is canceled by the backend server. 103/113: the update process is refused because the battery is low. 200/210: the device starts to download the package. 201/211: the device finishes downloading the package successfully. 202/212: the device fails to download the package. 300/310: the device starts to update the firmware. 301/311: the device finishes updating the firmware successfully. 302/312: the device fails to update the firmware. 303/313: the update process does not start because the battery is low.
dw_times	The count number of the package downloading.

Nom du paramètre

Description

Unités

battery

Battery level

charging

Whether the battery is charging when the external power supply is connected:
0: Not charging
1: Charging

external_pwr

External power supply:
0: Not connected
1: Connected

gps_antenna_type

A numeric to indicate which GPS antenna is working now
0: inside GPS antenna

gps_on_need

Whether to close GPS chip after retrieving GPS position information:
0: Never close GPS chip
1: Close GPS chip after retrieving GPS information every time
2: Never close GPS chip only in ignition on state or movement state
3: Never open GPS chip

gsm_level

The GSM signal strength level

gsm_quality

The quality of GSM signal

hdop

Horizontal Dilution of Precision

ign

Ignition state: 0: off, 1: on

ign_off_duration

Duration since last time the ignition is off

ign_on_duration

Duration since last time the ignition is on

led_on

The working mode of LEDs

mileage

The total mileage

movement_cause

The enter movement cause defines the factor who triggers the message:
0: Triggered by motion sensor detection. It is defaulted
1: Triggered by RTO sub command RTL
2: Triggered by the command GTLSW from EBK

movement_state

0: The state of the device changed from motion to rest
1: The state of the device changed from rest to motion

odo_mileage

The total mileage in the position

pwr_int

Battery voltage

report_type

Message type

state

The current motion state of the device:
21: The device attached vehicle is ignition on and motionless
22: The device attached vehicle is ignition on and moving
41: The device is motionless without ignition on
42: The device is moving without ignition on

temp_int

The temperature of the device

°C

geo_active

Indicate active or deactive Geo-Fence:
0 - Deactivate Geo-Fence
1 - Activate Geo-Fence

geo_mode

The new mode of Geo-Fence

geo_radius

The radius of Geo-Fence

geo_ch_int

The check interval of Geo-Fence

sec

upd_code

Confirmation/downloading/updating information from firmware updating:
100/110: the update command is confirmed by the device.
101/111: the update command is refused by the device.
102/112: the update process is canceled by the backend server.
103/113: the update process is refused because the battery is low.
200/210: the device starts to download the package.
201/211: the device finishes downloading the package successfully.
202/212: the device fails to download the package.
300/310: the device starts to update the firmware.
301/311: the device finishes updating the firmware successfully.
302/312: the device fails to update the firmware.
303/313: the update process does not start because the battery is low.

dw_times

The count number of the package downloading.

Remplissez le formulaire pour commencer à travailler avec Wialon