Monada AND1606

Monada AND1606
Fabricant: Monada
Forum de discussion

Nombre des unités

0
En ligne
1
Nombre total
Caractéristiques Monada AND1606:
  • Boîte à mémoire

Afin d'identifier le boîtier Monada AND1606 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon:

Type du boîtier GPS: Monada AND1606
ID unique: imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Monada AND1606 pour les utiliser dans Wialon Hosting:

Port du serveur: 22086

1 unités Monada AND1606 connectées au le centre de données Wialon — Ça fait 0% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
3_job_id

Unique job id

3_job_sn

Device serial number

3_job_fw_ver

Deivce firmware version

4_#_prod_name

Name of the product for section group #

4_#_sections_count

Number of sections in section group #

5_#_№_implement_offset

Left offset for tool № in section group #

sm
5_#_№_coverage_width

Coverage width of tool № in section group #

sm
6_#_target_rate

Tool target rate (units per meter) in section group # in mode "Precise"

u/m
6_#_trate_lo_err

Tool accuracy low limit in section group # in mode "Precise"

%
6_#_trate_hi_err

Tool accuracy high limit in section group # in mode "Precise"

%
6_#_doubles_max_err

Tool doubles limit in section group # in mode "Precise"

%
6_#_skips_max_err

Tool skips limit in section group # in mode "Precise"

%
7_#_target_rate

Tool target rate (units per meter) in section group # in mode "Units per path"

u/m
7_#_trate_lo_err

Tool accuracy low limit in section group # in mode "Units per path"

%
7_#_trate_hi_err

Tool accuracy high limit in section group # in mode "Units per path"

%
8_#_rate_min

Tool minimal rate intensity (units per seconds) in section group # in mode "Units per time"

u/s
9_#_target_rate

Tool target rate (kg per hectare) in section group # in mode "Mass per area"

kg/ha
9_#_trate_lo_err

Tool accuracy low limit in section group # in mode "Mass per area"

%
9_#_trate_hi_err

Tool accuracy high limit in section group # in mode "Mass per area"

%
10_#_target_rate

Tool target rate (liters per hectare) in section group # in mode "Volume per area"

l/ha
10_#_trate_lo_err

Tool accuracy low limit in section group # in mode "Volume per area"

%
10_#_trate_hi_err

Tool accuracy high limit in section group # in mode "Volume per area"

%
11_#_№_product_units

Amount of contributed product units by tool № in section group # in mode "Precise"

units
11_#_№_product_doubles

Amount of doubles made by tool № in section group # in mode "Precise"

units
11_#_№_product_skips

Amount of skips made by tool № in section group # in mode "Precise"

units
11_#_№_travel_path

Travel path of tool № in section group # in mode "Precise"

sm
11_#_№_travel_time

Travel time of tool № in section group # in mode "Precise"

s
11_#_№_control_type

Tool № in section group # control type:

0 - control of product application;

1 - tramline control (product loss);

2 - control is disabled by the operator;

3 - control is not possible due to sensor malfunction

12_#_№_product_units

Amount of contributed product units by tool № in section group # in mode "Units per path"

units
12_#_№_travel_path

Travel path of tool № in section group # in mode "Units per path"

sm
12_#_№_travel_time

Travel time of tool № in section group # in mode "Units per path"

s
12_#_№_control_type

Tool № in section group # control type in mode "Units per path":

0 - control of product application;

1 - tramline control (product loss);

2 - control is disabled by the operator;

3 - control is not possible due to sensor malfunction

13_#_№_product_units

Amount of contributed product units by tool № in section group # in mode "Units per time"

units
13_#_№_travel_path

Travel path of tool № in section group # in mode "Units per time"

sm
13_#_№_travel_time

Travel time of tool № in section group # in mode "Units per time"

s
13_#_№_control_type

Tool № in section group # control type in mode "Units per time":

0 - control of product application;

1 - tramline control (product loss);

2 - control is disabled by the operator;

3 - control is not possible due to sensor malfunction

14_#_№_product_weight

Amount of contributed product units by tool № in section group # in mode "Mass per area"

kg
14_#_№_travel_path

Travel path of tool № in section group # in mode "Mass per area"

sm
14_#_№_travel_time

Travel time of tool № in section group # in mode "Mass per area"

s
14_#_№_control_type

Tool № in section group # control type in mode "Mass per area":

0 - control of product application;

1 - tramline control (product loss);

2 - control is disabled by the operator;

3 - control is not possible due to sensor malfunction

15_#_№_product_volume

Amount of contributed product units by tool № in section group # in mode "Volume per area"

l
15_#_№_travel_path

Travel path of tool № in section group # in mode "Volume per area"

sm
15_#_№_travel_time

Travel time of tool № in section group # in mode "Volume per area"

s
15_#_№_control_type

Tool № in section group # control type in mode "Volume per area":

0 - control of product application;

1 - tramline control (product loss);

2 - control is disabled by the operator;

3 - control is not possible due to sensor malfunction

job_id

Current job id

job_name

Current job name

11_#_№_sown_ha

Tool № in section group # current sown area in mode "Precise"

ha
11_#_№_not_sown_ha

Tool № in section group # current not sown area in mode "Precise"

ha
11_#_№_unknown_ha

Tool № in section group # current not controlled area in mode "Precise"

ha
11_#_№_not_sown_pct

Tool № in section group # current not sown area in mode "Precise"

%
11_#_№_quality_pct

Tool № in section group # current quality sown area in mode "Precise"

%
11_#_№_doubles_pct

Tool № in section group # current doubles at area in mode "Precise"

%
11_#_№_skips_pct

Tool № in section group # current skips at area in mode "Precise"

%
11_#_№_low_rate_alarm_units

Tool № in section group # current low rate limit at area in mode "Precise"

units
11_#_№_high_rate_alarm_units

Tool № in section group # current high rate limit at area in mode "Precise"

units
11_#_№_low_rate_alarm

Tool № in section group # current low rate alarm at area in mode "Precise"

11_#_№_high_rate_alarm

Tool № in section group # current high rate alarm at area in mode "Precise"

units
11_#_№_rate_alarm_path_m

Tool № in section group # current path with rate alarm at area in mode "Precise"

m
11_#_№_rate_alarm_time

Tool № in section group # current time with rate alarm at area in mode "Precise"

s
11_#_№_product_losses

Tool № in section group # current product losses at area in mode "Precise"

units
11_#_№_product_losses_alarm

Tool № in section group # current alarm product losses at area in mode "Precise"

11_#_№_product_losses_path_m

Tool № in section group # current path with product losses at area in mode "Precise"

m
11_#_№_product_losses_time

Tool № in section group # current time with product losses at area in mode "Precise"

s
12_#_№_sown_ha

Tool № in section group # current sown area in mode "Units per path"

ha
12_#_№_not_sown_ha

Tool № in section group # current not sown area in mode "Units per path"

ha
12_#_№_unknown_ha

Tool № in section group # current not controlled area in mode "Units per path"

ha
12_#_№_low_rate_alarm_units

Tool № in section group # current low rate limit at area in mode "Units per path"

units
12_#_№_high_rate_alarm_units

Tool № in section group # current high rate limit at area in mode "Units per path"

units
12_#_№_low_rate_alarm

Tool № in section group # current low rate alarm at area in mode "Units per path"

12_#_№_high_rate_alarm

Tool № in section group # current high rate alarm at area in mode "Units per path"

12_#_№_rate_alarm_path_m

Tool № in section group # current path with rate alarm at area in mode "Units per path"

12_#_№_rate_alarm_time

Tool № in section group # current time with rate alarm at area in mode "Units per path"

12_#_№_product_losses

Tool № in section group # current product losses at area in mode "Units per path"

units
12_#_№_product_losses_alarm

Tool № in section group # current alarm product losses at area in mode "Units per path"

12_#_№_product_losses_path_m

Tool № in section group # current path with product losses at area in mode "Units per path"

m
12_#_№_product_losses_time

Tool № in section group # current time with product losses at area in mode "Units per path"

s
13_#_№_sown_ha

Tool № in section group # current sown area in mode "Units per time"

ha
13_#_№_not_sown_ha

Tool № in section group # current not sown area in mode "Units per time"

ha
13_#_№_unknown_ha

Tool № in section group # current not controlled area in mode "Units per time"

ha
13_#_№_low_rate_alarm_units

Tool № in section group # current low rate limit at area in mode "Units per time"

units
13_#_№_low_rate_alarm

Tool № in section group # current low rate alarm at area in mode "Units per time"

13_#_№_rate_alarm_path_m

Tool № in section group # current path with rate alarm at area in mode "Units per time"

13_#_№_rate_alarm_time

Tool № in section group # current time with rate alarm at area in mode "Units per time"

13_#_№_product_losses

Tool № in section group # current product losses at area in mode "Units per time"

units
13_#_№_product_losses_alarm

Tool № in section group # current alarm product losses at area in mode "Units per time"

13_#_№_product_losses_path_m

Tool № in section group # current path with product losses at area in mode "Units per time"

m
13_#_№_product_losses_time

Tool № in section group # current time with product losses at area in mode "Units per time"

s
14_#_№_factical_units_rate

Tool № in section group # current units rate per area in mode "Mass per area"

kg/ha
14_#_№_low_rate_alarm_units

Tool № in section group # current low rate limit at area in mode "Mass per area"

units
14_#_№_high_rate_alarm_units

Tool № in section group # current high rate limit at area in mode "Mass per area"

units
14_#_№_low_rate_alarm

Tool № in section group # current low rate alarm at area in mode "Mass per area"

14_#_№_high_rate_alarm

Tool № in section group # current high rate alarm at area in mode "Mass per area"

14_#_№_rate_alarm_path_m

Tool № in section group # current path with rate alarm at area in mode "Mass per area"

14_#_№_rate_alarm_time

Tool № in section group # current time with rate alarm at area in mode "Mass per area"

15_#_№_factical_units_rate

Tool № in section group # current units rate per area in mode "Volume per area"

l/ha
15_#_№_low_rate_alarm_units

Tool № in section group # current low rate limit at area in mode "Volume per area"

units
15_#_№_high_rate_alarm_units

Tool № in section group # current high rate limit at area in mode "Volume per area"

units
15_#_№_low_rate_alarm

Tool № in section group # current low rate alarm at area in mode "Volume per area"

15_#_№_high_rate_alarm

Tool № in section group # current high rate alarm at area in mode "Volume per area"

15_#_№_rate_alarm_path_m

Tool № in section group # current path with rate alarm at area in mode "Volume per area"

15_#_№_rate_alarm_time

Tool № in section group # current time with rate alarm at area in mode "Volume per area"

fin_job_id

Finished job id

fin_job_name_#

Finished job name at sectin group #

fin_11_#_№_sown_ha

Tool № in section group # total sown area in mode "Precise"

ha
fin_11_#_№_not_sown_ha

Tool № in section group # total not sown area in mode "Precise"

ha
fin_11_#_№_unknown_ha

Tool № in section group # total not controlled area in mode "Precise"

ha
fin_11_#_№_not_sown_pct

Tool № in section group # total not sown area in mode "Precise"

%
fin_11_#_№_quality_pct

Tool № in section group # total quality sown area in mode "Precise"

%
fin_11_#_№_doubles_pct

Tool № in section group # total doubles at area in mode "Precise"

%
fin_11_#_№_skips_pct

Tool № in section group # total skips at area in mode "Precise"

%
fin_11_#_№_low_rate_alarm_units

Tool № in section group # total low rate limit at area in mode "Precise"

units
fin_11_#_№_high_rate_alarm_units

Tool № in section group # total high rate limit at area in mode "Precise"

units
fin_11_#_№_rate_alarm_path_m

Tool № in section group # total path with rate alarm at area in mode "Precise"

m
fin_11_#_№_rate_alarm_time

Tool № in section group # total time with rate alarm at area in mode "Precise"

s
fin_11_#_№_product_losses

Tool № in section group # total product losses at area in mode "Precise"

units
fin_11_#_№_product_losses_path_m

Tool № in section group # total path with product losses at area in mode "Precise"

m
fin_11_#_№_product_losses_time

Tool № in section group # total time with product losses at area in mode "Precise"

s
fin_11_#_№_product_units

Tool № in section group # total amount of contributed product units in mode "Precise"

units
fin_12_#_№_sown_ha

Tool № in section group # total sown area in mode "Units per path"

ha
fin_12_#_№_not_sown_ha

Tool № in section group # total not sown area in mode "Units per path"

ha
fin_12_#_№_unknown_ha

Tool № in section group # total not controlled area in mode "Units per path"

ha
fin_12_#_№_low_rate_alarm_units

Tool № in section group # total low rate limit at area in mode "Units per path"

units
fin_12_#_№_high_rate_alarm_units

Tool № in section group # total high rate limit at area in mode "Units per path"

units
fin_12_#_№_rate_alarm_path_m

Tool № in section group # total path with rate alarm at area in mode "Units per path"

fin_12_#_№_rate_alarm_time

Tool № in section group # total time with rate alarm at area in mode "Units per path"

fin_12_#_№_product_losses

Tool № in section group # total product losses at area in mode "Units per path"

units
fin_12_#_№_product_losses_path_m

Tool № in section group # total path with product losses at area in mode "Units per path"

m
fin_12_#_№_product_losses_time

Tool № in section group # total time with product losses at area in mode "Units per path"

s
fin_12_#_№_product_units

Tool № in section group # total amount of contributed product units in mode "Units per path"

units
fin_13_#_№_sown_ha

Tool № in section group # total sown area in mode "Units per time"

ha
fin_13_#_№_not_sown_ha

Tool № in section group # total not sown area in mode "Units per time"

ha
fin_13_#_№_unknown_ha

Tool № in section group # total not controlled area in mode "Units per time"

ha
fin_13_#_№_low_rate_alarm_units

Tool № in section group # total low rate limit at area in mode "Units per time"

units
fin_13_#_№_rate_alarm_path_m

Tool № in section group # total path with rate alarm at area in mode "Units per time"

fin_13_#_№_rate_alarm_time

Tool № in section group # total time with rate alarm at area in mode "Units per time"

fin_13_#_№_product_losses

Tool № in section group # total product losses at area in mode "Units per time"

units
fin_13_#_№_product_losses_path_m

Tool № in section group # total path with product losses at area in mode "Units per time"

m
fin_13_#_№_product_losses_time

Tool № in section group # total time with product losses at area in mode "Units per time"

s
fin_13_#_№_product_units

Tool № in section group # total amount of contributed product units in mode "Units per time"

units
fin_14_#_№_factical_units_rate

Tool № in section group # total units rate per area in mode "Mass per area"

kg/ha
fin_14_#_№_low_rate_alarm_units

Tool № in section group # total low rate limit at area in mode "Mass per area"

units
fin_14_#_№_high_rate_alarm_units

Tool № in section group # total high rate limit at area in mode "Mass per area"

units
fin_14_#_№_rate_alarm_path_m

Tool № in section group # total path with rate alarm at area in mode "Mass per area"

fin_14_#_№_rate_alarm_time

Tool № in section group # total time with rate alarm at area in mode "Mass per area"

fin_14_#_№_product_weight

Tool № in section group # total weight of contributed product in mode "Mass per area"

kg
fin_15_#_№_factical_units_rate

Tool № in section group # total units rate per area in mode "Volume per area"

l/ha
fin_15_#_№_low_rate_alarm_units

Tool № in section group # total low rate limit at area in mode "Volume per area"

units
fin_15_#_№_high_rate_alarm_units

Tool № in section group # total high rate limit at area in mode "Volume per area"

units
fin_15_#_№_rate_alarm_path_m

Tool № in section group # total path with rate alarm at area in mode "Volume per area"

fin_15_#_№_rate_alarm_time

Tool № in section group # total time with rate alarm at area in mode "Volume per area"

fin_15_#_№_product_volume

Tool № in section group # total volume of contributed product in mode "Volume per area"

l

Contactez Gurtam et atteignez les objectifs les plus ambitieux en télématique

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1
Étape 2
Étape 3
Prénom et nom *
Entreprise*
Email*
Téléphone