Traceur GPS Eelink TK418 | Intégré à Wialon

Caractéristiques Eelink TK418:

4G/LTE
Boîte à mémoire
Compatibilité avec GLONASS

Afin d'identifier le boîtier Eelink TK418 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	Eelink TK418
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Eelink TK418 pour les utiliser dans Wialon Hosting :

Port du serveur:

22015

1541 unités Eelink TK418 connectées au le centre de données Wialon — Ça fait 0.07% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
report_type	1 - ACC On 2 - ACC Off 3 - DINx changed
mcc	Mobile country code
mnc	Mobile network code
lac	Location area code
cell_id	Cell tower ID
dev_status	Bit 0 1: GPS is fixed 0: GPS is not fixed Bit 1 1: Device is designed for car 0: Device is not designed for car Bit 2 1: Car engine is fired (only valid when bit 1 is 1) 0: Car engine is not fired Bit 3 1: Accelerometer is supported 0: No accelerometer Bit 4 1: The motion-warning is activated (only valid when bit 3 is 1) 0: The motion-warning is deactivated Bit 5 1: Relay control is supported 0: No relay control Bit 6 1: The relay control is triggered (only valid when bit 5 is 1) 0: The relay control is not triggered Bit 7 1: External charging is supported 0: No external charging Bit 8 1: Device is charging (only valid when bit 7 is 1) 0: Device is not charging Bit 9 1: Device is active (only valid when bit 3 is 1) 0: Device is stationary Bit 10 1: GPS module is running 0: GPS module is not running Bit 11 1: OBD module is running (only valid when OBD is supported) 0: OBD module is not running Bit 12 1: DIN0 is high level (only valid when DIN0 is supported) 0: DIN0 is low level Bit 13 1: DIN1 is high level (only valid when DIN1 is supported) 0: DIN1 is low level Bit 14 1: DIN2 is high level (only valid when DIN2 is supported) 0: DIN2 is low level Bit 15 1: DIN3 is high level (only valid when DIN3 is supported) 0: DIN3 is low level
pwr_int	Battery voltage	mV
ain0	AIN0 value	mV
ain1	AIN1 value	mV
mileage	Device mileage	m
gsm_counter	GSM counter from last GSM command	min
gps_counter	GPS counter from last GPS command	min
pdm_step	Accumulated steps today
pdm_time	Accumulated walking time today	sec
temp	Internal temperature (in (1/256)C)	C
humidity	Humidity (in (1/10)%)	%
illuminance	Illuminance (in (1/256)lx)	lx
co2	CO2 concentration	ppm
warning_type	Warning type
phone_number	Phone number
mess_content	Message content
pid_X	PID data
body_status	Body status: BYTE0: Door status BIT0: Left-front door (0: Closed 1: Open) BIT1: Right-front door (0: Closed 1: Open) BIT2: Left-back door (0: Closed 1: Open) BIT3: Right-back door (0: Closed 1: Open) BIT4: Luggage door (0: Closed 1: Open) BYTE1: Gear status 0x00: Not supported 0x50: Park 0x52: Reverse 0x4E: Neutral 0x44: Drive BYTE2: LED status BIT0: Engine LED (0: Closed 1: Open) BIT1: ABS LED (0: Closed 1: Open) BIT2: SRS LED (0: Closed 1: Open) BIT3: Brake LED (0: Normal/Released 1: Abnormal/Braking) BIT4: Central locking (0: Unlocked 1: Locked) BYTE3: Misc BIT0: ACC (0: Off 1: On) BIT1: Tire Pressure Monitor System (0: Normal 1:Abnormal) BIT2, BIT3: Remote key (00: No key is pressed 01: Unlock key is pressed 10: Lock key is pressed)
PX	Fault code
full_steps	Accumulated steps in total
full_time	Accumulated walking time in total	sec
full_distance	Accumulated walking distance in total	mm
full_energy	Accumulated burnt energy in total	cal
day_steps	Accumulated steps in last day
day_time	Accumulated walking time in last day	sec
day_distance	Accumulated walking distance in last day	mm
day_energy	Accumulated burnt energy in last day	cal
instr_pac	Instruction content
instr_type	Instruction type
instr_uid	Instruction UID
cmd_answer	Instruction content
language	Device language: 0x00 — Chinese; 0x01 — English; Other — Undefined
time_zone	Device timezone
sys_ver	System version
app_ver	Application version
ps_ver	Param-set version

Nom du paramètre

Description

Unités

report_type

1 - ACC On

2 - ACC Off

3 - DINx changed

mcc

Mobile country code

mnc

Mobile network code

lac

Location area code

cell_id

Cell tower ID

dev_status

Bit 0

1: GPS is fixed

0: GPS is not fixed

Bit 1

1: Device is designed for car

0: Device is not designed for car

Bit 2

1: Car engine is fired (only valid when bit 1 is 1)

0: Car engine is not fired

Bit 3

1: Accelerometer is supported

0: No accelerometer

Bit 4

1: The motion-warning is activated (only valid when bit 3 is 1)

0: The motion-warning is deactivated

Bit 5

1: Relay control is supported

0: No relay control

Bit 6

1: The relay control is triggered (only valid when bit 5 is 1)

0: The relay control is not triggered

Bit 7

1: External charging is supported

0: No external charging

Bit 8

1: Device is charging (only valid when bit 7 is 1)

0: Device is not charging

Bit 9

1: Device is active (only valid when bit 3 is 1)

0: Device is stationary

Bit 10

1: GPS module is running

0: GPS module is not running

Bit 11

1: OBD module is running (only valid when OBD is

supported)

0: OBD module is not running

Bit 12

1: DIN0 is high level (only valid when DIN0 is supported)

0: DIN0 is low level

Bit 13

1: DIN1 is high level (only valid when DIN1 is supported)

0: DIN1 is low level

Bit 14

1: DIN2 is high level (only valid when DIN2 is supported)

0: DIN2 is low level

Bit 15

1: DIN3 is high level (only valid when DIN3 is supported)

0: DIN3 is low level

pwr_int

Battery voltage

ain0

AIN0 value

ain1

AIN1 value

mileage

Device mileage

gsm_counter

GSM counter from last GSM command

min

gps_counter

GPS counter from last GPS command

min

pdm_step

Accumulated steps today

pdm_time

Accumulated walking time today

sec

temp

Internal temperature (in (1/256)C)

humidity

Humidity (in (1/10)%)

illuminance

Illuminance (in (1/256)lx)

co2

CO2 concentration

ppm

warning_type

Warning type

phone_number

Phone number

mess_content

Message content

pid_X

PID data

body_status

Body status:
BYTE0: Door status

BIT0: Left-front door (0: Closed 1: Open)
BIT1: Right-front door (0: Closed 1: Open)
BIT2: Left-back door (0: Closed 1: Open)
BIT3: Right-back door (0: Closed 1: Open)
BIT4: Luggage door (0: Closed 1: Open)

BYTE1: Gear status

0x00: Not supported
0x50: Park
0x52: Reverse
0x4E: Neutral
0x44: Drive

BYTE2: LED status

BIT0: Engine LED (0: Closed 1: Open)
BIT1: ABS LED (0: Closed 1: Open)
BIT2: SRS LED (0: Closed 1: Open)
BIT3: Brake LED (0: Normal/Released 1: Abnormal/Braking)
BIT4: Central locking (0: Unlocked 1: Locked)

BYTE3: Misc

BIT0: ACC (0: Off 1: On)
BIT1: Tire Pressure Monitor System (0: Normal 1:Abnormal)
BIT2, BIT3: Remote key (00: No key is pressed 01: Unlock key is pressed 10: Lock key is pressed)

Fault code

full_steps

Accumulated steps in total

full_time

Accumulated walking time in total

sec

full_distance

Accumulated walking distance in total

full_energy

Accumulated burnt energy in total

cal

day_steps

Accumulated steps in last day

day_time

Accumulated walking time in last day

sec

day_distance

Accumulated walking distance in last day

day_energy

Accumulated burnt energy in last day

cal

instr_pac

Instruction content

instr_type

Instruction type

instr_uid

Instruction UID

cmd_answer

Instruction content

language

Device language: 0x00 — Chinese; 0x01 — English; Other — Undefined

time_zone

Device timezone

sys_ver

System version

app_ver

Application version

ps_ver

Param-set version

Remplissez le formulaire pour commencer à travailler avec Wialon

Produits

Produits de niche pour des tâches spécifiques

Eelink TK418

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon