Traceur GPS AR Series | Intégré à Wialon

Compatible avec Wialon:

Communication via UDP

Afin d'identifier le boîtier AR Series les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	AR Series
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration AR Series pour les utiliser dans Wialon Hosting :

Port du serveur:

21126

1225 unités AR Series connectées au le centre de données Wialon — Ça fait 0.05% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
hdop	An indication of the quality of the received signal
rssi	Relative indication of the RF signal strength seen by the device
main_pwr	Indicates the voltage of the power source	10 mV
backup_pwr	Indicates the voltage of a secondary power source	10 mV
gpio_status	GPIO Status
gpio_dir	GPIO Direction
odometer	Odometer	km
baseband_ver	Indicates the software release version of the baseband subsystem.
app_ver	Indicates the current release of the application running on a given device.
assembly	Board assembly
rev	Indicates the revision of the assembly
io_ver	Indicates the software release version of the I/O processor
change_bit	Is set if the original configuration has been altered with one or more user commands
conf_num	Indicates the version of the configuration installed on the device
event	1 - Power-Up (Power up report) 2 - Heart Beat (Periodic report) 3 - BuB Heart Beat (Periodic report when running from backup battery) 4 - BuB On (Switched to backup battery (main power loss)) 5 - BuB Off (Switched back from BuB to main power) 6 - Power Drop (External power dropped below +XPWL threshold) 7 - Power Restore (External power raised above +XPWL threshold) 12 - Relay High (RLY state changed from 0 → 1) 13 - Relay Low (RLY state changed from 1 → 0) 14 - Ignition High (Ignition state changed from low → high) 15 - Ignition Low (Ignition state changed from high → low) 16 - GPS Locked (Valid GPS) 17 - GPS Unlocked (Invalid GPS) 18 - IP Changed (Local IP address changed) 19 - Speeding Start (Speed raised above specified threshold) 20 - Speeding Stop (Speed dropped below specified threshold) 22 - Drive Trip - Start (Trip Started) 23 - Drive Trip - End (Trip Ended) 24 - Moving (Recurring event while in “trip” and moving) 25 - Stopped (Recurring event while stopped) 26 - Heading Change (Changed heading by a specified degree while in “trip”) 27 - Drive Distance (Recurring event passing specified distance while in “trip”) 28 - Tow Alert (Vehicle moving with ignition off) 30 - Idling Alert (Vehicle is Idle) 31 - Now Report (Response to Report Now command) 32 - Periodic Reset (Scheduled “reset” took place) 33 - Trip Odometer (Virtual Trip Odometer reached specified threshold) 34 - Maintenance (Maintenance Periodic Report) 37 - GP1 High (GP1 state changed from 0 → 1) 38 - GP1 Low (GP1 state changed from 1 → 0) 39 - GP2 High (GP2 state changed from 0 → 1) 40 - GP2 Low (GP2 state changed from 1 → 0) 41 - GP3 High (GP3 state changed from 0 → 1) 42 - GP3 Low (GP3 state changed from 1 → 0) 43 - GP4 High (GP4 state changed from 0 → 1) 44 - GP4 Low (GP4 state changed from 1 → 0) 64 - Power Save (External power dropped below +XPWS threshold) 65 - Power Normal (External power raised above +XPWS threshold) 96-111 - Geo-Fence Enter (Second digit of event indicates geo-fence number) 112-127 - Geo-Fence Exit (Second digit of event indicates geo-fence number)

All device models 2G, 3G, CDMA are supported.

Remplissez le formulaire pour commencer à travailler avec Wialon

Produits

Produits de niche pour des tâches spécifiques

AR Series

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon