StarLink Asset

StarLink Asset
Forum de discussion

Nombre des unités

0
En ligne
1
Nombre total
Caractéristiques StarLink Asset:
  • 3G
  • Boîte à mémoire
Compatible avec Wialon:
  • Capteurs analogiques (ADC)
  • Gestion à distance via GPRS
  • Capteurs numériques
  • LBS
  • Gestion à distance via SMS
  • Communication via TCP

Afin d'identifier le boîtier StarLink Asset les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS: StarLink Asset
ID unique: custom

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration StarLink Asset pour les utiliser dans Wialon Hosting :

Port du serveur: 21790

1 unités StarLink Asset connectées au le centre de données Wialon — Ça fait 0% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
alarm_armed Shows if alarm is armed. 0 - disarmed, 1 - armed
alarm_door Door state. 0 - closed, 1 - open
alarm_hood Hood state. 0 - closed, 1 - open
can_fuel_level CAN fuel level %
can_odometer CAN odometer value
can_rpm CAN engine revolutions per minute value r/min
can_speed km/h CAN speed value
event_id Code of the event
engine Engine. 0 - off, 1 - on
can Value 1 shows that message contains CAN data
in_port_e Input 3 / Port E value. 0 - off, 1 - on
immobilizer_armed Immobilizer state
in_port_f Input 4 / Port F value. 0 - off, 1 - on
odometer Odometer value m
out_port_b Output 2 / Port B value. 0 - off, 1 - on
pwr_ext Vehicle battery voltage V
pwr_int Backup battery voltage V
ref_num Message number
ign Ignition state. 0 - off, 1 - on
esafe_msg_type

Message type from eSafe:
137 - Maneuver notification, will be transmitted as Drive rule occurred if enabled
143 - Accident notification, will be transmitted as Accident detected if enabled
144 - Drive status changed
145 - Too many events
146 - Bad installation
147 - Possible accident notification

esafe_maneuv_type

The eSafe maneuver type:
1 - Acceleration
2 - Breaking
3 - Left turn
4 - Right turn
5 - Wide left turn
6 - Wide right turn
7 - Left turn while decelerating
8 - Left turn while accelerating
9 - Wide left turn while decelerating
10 - Wide left turn while accelerating
11 - Right turn while decelerating
12 - Right turn while accelerating
13 - Wide right turn while decelerating
14 - Wide right turn while accelerating
15 - Traffic circle
16 - Lane change
17 - Overtaking
18 - Speed bump
19 - Start of off-road driving
20 - End of off-road driving

esafe_maneuv_level

The eSafe maneuver level:
1 - Low
2 - Medium
3 - High

esafe_maneuv_dur The eSafe maneuver duration ms
esafe_force_x The eSafe maximum g force detected in the X axis g
esafe_force_y The eSafe maximum g force detected in the Y axis g
esafe_force_z The eSafe maximum g force detected in the Z axis g
esafe_accident_direct

The eSafe accident directions:
1 - Front
2 - Front left
3 - Front right
4 - Back
5 - Back left
6 - Back right
7 - Left
8 - Right
9 - Vehicle rolled over

esafe_driver_state

The eSafe driver state:
0 - Normal
1 - Aggressive
2 - Dangerous

esafe_aggres_maneuvers The eSafe total number of aggressive maneuvers
esafe_danger_maneuvers The eSafe total number of dangerous maneuvers
esafe_num_maneuvers The eSafe total number of maneuvers

You can also download an example of object configuration file for Starlink GLONASS to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.

To get the dynamic parameters of the message send the command 03,01,177

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1
Étape 2
Étape 3
Prénom et nom *
Entreprise*
Email*
Téléphone