Remora

Remora
Forum de discussion

Nombre des unités

0
En ligne
70
Nombre total
Caractéristiques Remora:
  • 3G
  • Boîte à mémoire
  • Compatibilité avec GLONASS
Compatible avec Wialon:
  • Capteurs analogiques (ADC)
  • Capteurs numériques
  • Communication via TCP

Afin d'identifier le boîtier Remora les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon:

Type du boîtier GPS: Remora
ID unique: imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Remora pour les utiliser dans Wialon Hosting:

Port du serveur: 21197

70 unités Remora connectées au le centre de données Wialon — Ça fait 0.13% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
cell_id_# Cell ID
cell_loc_code_# Location Area Code
mcc_# Mobile Country Code (MCC)
mnc_# Mobile Network Code (MNC)
wifi_chnl_# WiFi Channel
wifi_rssi_# Signal strength dBm
wifi_mac_ap_# MAC address of AP
gforse_dur Duration ms
gforse_ave Average absolute value of G force 1024 = 1G
gforse_peak Peak G force 1024 = 1G
rftag_gateway Gateway serial. The serial of the receiving gateway.
rftag_serial Serial number. Null in Trailer mode.
rftag_token Token. Shows asset in Trailer mode. Otherwise may be null.
rftag_gate_mode Gateway mode. 0 = Trailer, 1 = Taglist 2, 3 = Reserved
rftag_link_type Link type. 0 = Broadcast, 1 = Static, 2= Dynamic, 3 = Reserved.
rftag_tag_type Tag type. 0 = Mini, 1 = T50, 2 = Tiny, Other = reserved.
rftag_last Last seen. Time since last seen, in seconds or minutes. sec or min
rftag_last_type Last seen in mins. Indicates previous field is in minutes. min
rf_gateway Gateway serial. The serial of the receiving gateway.
rf_serial Serial number. The serial of the tag.
rf_gate_mode Gateway mode. 0 = Trailer, 1 = Taglist, 2, 3 = Reserved
rf_link_type Link type. 0 = Broadcast 1 = Static 2= Dynamic 3 = Reserved
rf_token Token. Shows asset in Trailer mode. Otherwise may be null.
rf_gained_tag Gained tag. Set when tag/asset comes into range/is selected.
rf_rssi_delta RSSI delta. Set when RSSI changes significantly (Taglist mode).
rf_please_report Please report. Set when tag requests a report.
rf_deb_fail Debounce failed. Set when digital IO’s are reported oscillating.
rf_tag_type Tag type. 0 = Mini, 1 = T50, 2 = Tiny, Other = reserved.
rf_fw_ver Firmware version
rf_hard_ver Hardware revision
rf_rssi RSSI In dBm. dBm
rf_tx_pwr Tx power. In dBm. dBm
rf_period Report period. Tag report period.
rf_period_type Period in minutes. Indicates period in minutes / seconds. sec/min
rf_count Retry count. How many times was Id message retried?
rf_pwr_int Battery voltage. Units 3.3 / 256 V.
rf_d_level Digital levels. Logical digital levels
rf_d_change Digital changes. Which levels changed.
rf_#_l_alarm Low alarm. Value below alarm threshold
rf_#_h_alarm High alarm. Value above alarm threshold
rf_#_value Value Sensor value, or INT32_MAX for null.
trip_code ASCII trip type code
project_code ASCII project code
blob_serial Device Serial Number
blob_slot_id Slot ID
blob_id BLOB ID
blob_mime_type Data Type – MIME type
blob_meta_# BLOB meta data
adc_### Analogue Data
measur_type SDI12 Measurement Type (0-9)
dev_ident Measurement (scaled by 1000) Scaled by 1000 Eg milli-degrees centigrade
drv_id_type Driver ID type / flags
drv_id_data Driver ID data
status_flags

Device Status Flags (1-16)

b1-b8: common across devices

b1 = trip status. 1 = “in trip”

b2 = internal battery good

b3 = external power good

b4 = connected to GSM

b5 = shunting power from battery

b6 = external power enabled

b7 = tamper alert

b8 = recovery mode active

b9-b16: device specific

severity Severity. 0 = Info, 1 = Warning, 2 = Severe, 3 = Critical
module_id Module ID
event_code Event code
ascii_debug Ascii debug string
gps_flag GPS Status.
Flags b0=fix VALID, b1=3D fix, b2= old fix, due to loss of signal (b2 applies to Remora only)

Plus de boîtiers GPS de ce fabricant

Contactez Gurtam et atteignez les objectifs les plus ambitieux en télématique

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1
Étape 2
Étape 3
Prénom et nom *
Entreprise*
Email*
Téléphone