Queclink GL300M

Queclink GL300M
Discusión en el foro

Cantidad de unidades

163
En línea
13872
Total
Características Queclink GL300M:
  • Caja negra
Puede ser apoyada por la petición:
  • Gestión remota vía GPRS
  • Gestión remota vía SMS
  • Comunicación vía TCP
  • Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de Queclink GL300M en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: Queclink GL300M
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Queclink GL300M para utilizarlos en Wialon Hosting :

Puerto del servidor: 21845

En el centro de servicio Wialon se utilizan 13872 unidades Queclink GL300M — es 0.59% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
report

RESP
BUFF
ACK

buffer

0 - not buffered message
1 - buffered message

{0,1}
msg_type_name Name of message type
report_name GTXXX where XXX is name of message type
proto_ver Protocol Version
name Device Name
report_id

Report ID.
For GEO:
it indicates the ID of the Geo-Fence.
For FRI:
it indicates the <Append Mask>.
For SOS:
0: Triggered through other ways.
1: Triggered by input ID 1.
For HBM:
“3” indicates high speed,
“2” indicates medium speed
“1” indicates low speed.

report_type

Report Type.
For FRI
0: This message is a common scheduled position report.
1: This message is a turning point.
For GEO
0: Exit the corresponding Geo-fence.
1: Enter the corresponding Geo-fence.
For SPD
0: Outside the speed range.
1: Inside the speed range.
For NMR
0: The state of the device changes from motion to rest.
1: The state of the device changes from rest to motion.
For DIS
0: The current logic status of the input port is low level.
1: The current logic status of the input port is high level.
For IGL
0: The engine is ignition on.
1: The engine is ignition off.
For DOG
0: Reboot periodically according to the <Interval> and <Time> settings or upon ignitionon or by <Input ID>
1: PDP is unable to register successfully or the interaction of messages fails
2: No WCDMA signal
For HBM
0: Harsh braking behavior
1: Harsh acceleration behavior

mileage Mileage
battery Battery Percentage 0 - 100
temp Temperature

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono